Used Glob-Ram Rm727S Sorteergrijper for sale (22,734)

Condition: used, Hydraulic press, punching frame for the use of JOKA type HP-S punching units Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture approx. 1995 Pressure output 5 tons. Projection 155 mm Stroke approx. 20 mm Punching unit width max. 54 mm Punching unit height max. 220 mm Die holder Ø 48 mm Motor power 1.5 kW Power supply 230 volts, 50 Hz - for universal use of JOKA SW 20 or SWD 20 punching units - Projection of the punching units can be larger, can be pushed through to the rear - Stroke triggered via electrical two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/ on frame substructure, mobile Space requirement L x W x H 1100 x 800 x 1450 mm Weight approx. 200 kg good condition Dcsloltrmusimyzxsg

Condition: new, Year of construction: 2025, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: Dcjlij Nn Hyomyzxsg • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: excellent (used), S & A Test Chamber Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Dolien Arl Semyzxecg Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Year of construction: 1992, electro-hydraulic frame press heavy-duty design pressing force max. 3000 kp per cylinder with quick adjustment of the cylinders using a hole pattern 3 cylinders vertically, 2 cylinders horizontally pressing force adjustable up to max. 3000 kg per cylinder Dcjlimyzovx Rtmexog

Condition: used, In good condition Workbench area 2450x1000 mm Number of pressed parts: 3 The area of the pressed part is 800x1000 mm Maximum working height 500 mm Transport dimensions 2700x1000x1800 mm Weight 1055 kg Price 1100 Eur (EXW Jonava, Lithuania) Dcsleq Tn Nuoimyzxsg

Condition: good (used), Functionality: fully functional, hydraulic frame press - Working width 3500 mm - Working height 3000 mm - 3 vertical, 2 lateral pressure cylinders Delimsvyh Abjyzxecg - Motor 2.2 kW

Condition: good (used), Code: 0040 Brand: BREVETTI MOTTA - ITALY Dslimyzev Am Ibexecg Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Condition: used, Functionality: fully functional, mileage: 653,980 km, first registration: 01/2020, Year of construction: 2020, High cab, full aerodynamics, double tanks, double bunk, front leaf springs, frame, spare wheel Delimsv T In Royzxecg

Condition: good (used), Here, we offer a Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device. Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device Bosch Sigpack Systems XR31-3 with Manz AICO pendant P51 hand programming device 80017134 Dcelimyzjdqbbcoxog Bosch Sigpack Systems Type: XR31-3 Manz handheld programming device Type: 80017134 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: new, Year of construction: 2025, IVECO NEW Daily, yet to be registered, 3.0 cc 160hp engine, 4100mm wheelbase. Doliev R Hbkemyzxscg Digital cockpit, climate control, touch screen infotainment with AppleCarplay and Android Auto, suspension seat, parking sensors, cruise control. 24 MONTH OFFICIAL IVECO WARRANTY PRIVATE NEGOTIATION

Condition: new, Year of construction: 2025, Automatic feeding system for cans, glasses, bottles. Separation of single containers and automatic orientation to the conveyor of filling station. - Specifications: Speed: up to 80 containers/min; diameter of table: 1.000mm; 380V, 0,18kW; machine weight: 50kg; dimensions: L1400xW1200xH1200mm. Djlimyjv Nk Hhjzxjcg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Fuel type: diesel Dslimsv Igf Rjyzxjcg New: No Drive: motor Damage: none

Condition: excellent (used), Indramat Make Siemens Dcelimjfuv Sleyzxsg Model 1/1X113-008 Contr. TDM 1.2-50-300-W1

Condition: used, Functionality: fully functional, Year of construction: 2020, Separation conveyor 2 pieces identical Dcjlsvtm Dqsimyzxjg

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Djlimocnic Dsyzxocg Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition Dslimedz Srbsyzxocg 2 pieces available, price per piece

Condition: new, Year of construction: 2025, This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 20-80mm; bottle height: max. 120mm; sorting speed: max. 100 bottles/min; compressed air: 5bar; power: 220V, 0.6kW; machine dimensions: L950xW950xH1000mm. Optional: different unscramble trays for different bottle sizes. Dcjliev Nk Hnomyzxsg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Working width 3050 mm Working height 2050 mm Number of cylinders 6 St. Dimensions (L/W/H) 3970x950x2400 mm Hess Speedy frame press with 2 central pressure bars! ----- ----- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment, locking in 50 mm Dcelieu N Iwhsmyzxjg Double hole grid system Electrical height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 3 positions 4 vertical pressure cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal pressure cylinders stroke 80 mm Pressure and support plates depth 100 mm Pressure force per cylinder 1250 kN / 12500 N Cylinder fixation / abutment grid 50 mm Medium pressure beam with shut-off valve Final pressure shut-off and post-pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 3.0 kW / 400V Machine dimensions W=3970 mm, D=950 mm, H=2400 mm Weight approx. 1680 kg Machine checked. Original pictures. Video shows press from our archive. (technical data according to the manufacturer - no guarantee!)

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dslorffm Neimyzxecg On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg Type: 4220A Condition: used Dcolimyscnic Sozxjg Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 45-90mm; bottle height: 75-240mm; sorting speed: max. 100 bottles/min; machine stops automatically when the bottles are jammed due to photocell; MITSUBISHI PLC, WEVIEW touchscreen, OPTEX photocell, SCHNEIDER frequency converter; Frame of stainless steel (SS304); compressed air: 6-8bar; power: 220V, 2kW; machine dimensions: L2600xW1500xH1500mm. Optional: different unscramble trays for different bottle sizes. Dslimyzev Nk Husxecg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Working width 3550 mm Working height 2250 mm Number of cylinders 5 St. loading dimensions L x W x H 4500 x 900 x 2600 mm Hess Speedy frame press ----- Press will be Checked Insertion dimension / pressing length max. 3,550 mm Insertion dimension / pressing height max. 2,250 mm Sliding carriage for width adjustment locking in 50 mm Dcslievn U Rnomyzxjg Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for studio window gluing 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Photo and video not original, shows press of same type. (technical data according to the manufacturer - no guarantee!)

Condition: used, Schließrahmen - Letter Press Frame Adast GP Tiegel-1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video Dolimyerffniozxscg We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Dslimshhil Tsyzxjcg Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4-4 Frame SBG Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dcoljrffm Tjimyzxeg On Stock Emskirchen / Nürnberg - Can be test