Used Fordson Power Major for sale (42,024)

Condition: reconditioned (used), operating hours: 3,680 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 12,000 rpm, Spindle replacement in 2021 - approximately 3,680 spindle hours since then (estimate) Submission of a bid obligates the buyer to pick up the machine by May 20, 2025. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Spindle Speed range: max. 12,000 rpm Spindle drive power: 15 / 10 kW Max. torque: 130 Nm Tool holder: SK 40 Table Table diameter: 630 mm Max. table load: 500 kg Tool magazine Number of tool positions: 30 Max. tool length: 350 mm Feed & rapid traverse Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 – 10,000 mm/min Control Control: Heidenhain TNC 426 MACHINE DETAILS Space requirement: approx. 7.0 x 6.0 x 2.7 m Machine weight: 7,500 kg Total power requirement: 44 kVA Dkehx Dxmowgaz Iomjl Operating hours On-time: 89,186 h New spindle running time: 3,680 h (estimated) Total spindle running time: 35,845 h No chucks or vices included in the offer.

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, pressing force: 400 t, distance between stands: 3,400 mm, working length: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Bending length: 4,050 mm Width between columns: 3,400 mm Speed: 37.5 rpm Motor power: 37 kW Axes and control system Axes: Y1 / Y2, X, R Crowning: CNC-controlled Backgauge: CNC-controlled Crowning device: Motor-adjustable via CNC control system Tooling Upper tool: 1010/A/75°, split offset Die: Multi-V die MACHINE DETAILS Dimensions (L × W × H): 5,750 × 2,110 × 3,440 mm Weight: approx. 25,000 kg Safety and handling equipment Laser protection device: on the upper beam Sheet metal support arms: 2 units on linear guides EQUIPMENT Dkshx Dxmowd Ngusmsl - CNC-controlled crowning - CNC backgauge - 2 sheet support arms on linear guides - Laser protection device on the upper beam - Offset, split upper tool - Multi-V die - Y1/Y2, X, and R-axis control - Operating instructions

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes Dohx Dewc Tdujxmmskl - High flexibility thanks to a wide range of modules

Condition: good (used), Year of construction: 1965, Functionality: fully functional, grinding wheel diameter: 350 mm, rotational speed (max.): 32 rpm, thread length: 500 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Dkshx Dswcrviexmmsl Workpiece diameter: 200 / 250 mm Thread length: 500 mm Thread pitch: 6 - 72 mm Grinding diameter: min. 1 mm Center distance: 800 mm Module: max. 8 Helix angle: 40° Relief grinding: 0.015 - 4 mm Spindle and grinding wheel Workpiece spindle speeds: 0.19 - 32 rpm Grinding wheel diameter: 275 - 350 mm MACHINE DETAILS Total power requirement: 11 kW Machine weight: approx. 3.6 t Space required: approx. 3.8 x 2.3 x 1.0 m EQUIPMENT - 2 dressing devices - Various accessories

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Dkehx Dswcrrdoxmmjl Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Dkshxewff R Se Dxmmel Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, Includes Indunorm UL300 pallet changer (3 pallet sizes) Submission of bid obligates the buyer to pick up the item by May 30, 2025. Disassembly and loading available for an additional charge. TECHNICAL DETAILS X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping table Table dimensions: 500 mm diameter Table dimensions with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic tool changer Tool holder: HSK63 Number of tool positions: 80 Indunorm pallet changer Pallet size 1 for automation: 6 pcs, 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc, 398 mm x 398 mm Pallet size 2 for automation: 15 pcs, Erowa ITS115 mm Pallet size 3 for automation: 32 pcs, Erowa ITS50 mm Transfer weight including pallet: 300 kg Dkohjwgcn Dsx Dxmmol Rapid traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed X-axis feed: 32 m/min Y-axis feed: 40 m/min Z-axis feed: 40 m/min A-/C-axis feed: 12,000°/min (equivalent to 33.3 rpm at max. 500 kg) A-/C-axis feed: 18,000°/min (equivalent to 50 rpm) MACHINE DETAILS Width: 3,200 mm Depth: 3,550 mm Height: 2,900 mm Machine weight: 16,000 kg Operating hours On-time: 41,624 h Operating time: 21,877 h Machining time: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper belt filter - Bed flushing system - Electric handwheel - 6 Parotec pallets, 398 mm x 398 mm - 1 Parotec pre-pallet for Erowa ITS, 398 mm x 398 mm - Extensive control options for Fanuc - Machine documentation - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing system - Manual flushing gun - External coolant with 3 nozzles, 7 bar - Internal coolant, 15 bar - Coolant temperature control - Internal and external air supply A service provider can be arranged for dismantling and loading. Price approx. €11,000

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Dkohxewffkxe Dxmmel Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, Functionality: fully functional, temperature: 450 °C, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, HIGHLIGHTS - High temperatures - for maximum performance - Quick start - production volume can be preheated in just over an hour - Large print volume - for the high demand for high-end parts made of high-performance plastics - Precise manufacturing - Patented mechatronic X and Y handling - Greater stability with large prints - thanks to the ARGO vacuum leveling system - Better control - Self-leveling of the level, dual gears in the dual extruder, advanced sensor system - Spool temperature control - for dry polymers and filaments TECHNICAL DETAILS Extrusion temperature: 450 °C Hot chamber temperature: 180 °C Hot chamber parameters: Humidity, pressure, temperature Polymers and composites: PEEK, ULTEM™ AM9085F, FLEX-TPU, FUNCTIONAL-NYLON, STRONG-ABS, PP, PC-LEXANT™ AMHI240F, ABS-ESD ULTRA-PLA, Carbon PEEK, and Carbon PA PRO Print Volume: 500 x 500 x 500 mm X, Y, and Z Accuracy: 10 / 25 µm Resolution Quality/Speed: 0.225 / 0.300 mm Print Speed: 5,000 mm/min Extruder Tip 2-B: 0.4 mm and 0.6 mm Extruder Tip 2-HA: 0.4 mm and 0.6 mm Extruder Tip 3-HSA: 0.4 mm and 0.6 mm MACHINE DETAILS Dimensions: 1,935 x 1,436 x 2,375 mm Djhswd Sgdox Dxmmokl Weight: 1,700 kg Power Supply: 15 kVA / 400 V AC / 50 Hz DESCRIPTION - High-performance structure made of aluminum rods and steel cover - Precision ball bearing system and ground steel linear guides - Mechatronic X- and Y-axis motion with hardened C5 helical gear rack and pinion - Z-axis motion with a system of precise C6 ball screws - Moving components and aluminum supports with precision CNC machining - Vacuum system for polymer layer adhesion - Automatic build plate leveling - Security system with door lock - Integrated HT dryer with temperatures up to 120°C and automatic filament loading - Controlled chamber with forced ventilation - Pneumatic assist system Hyperspeed – optional upgrade available (€30,000)

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Dkohxewc Sicj Dxmmsl Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: ready for operation (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 2287, pressing force: 16 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Machine was rebuilt in 2017! Dkjhswhdplox Dxmmjl TECHNICAL DETAILS Pressure: 160 kN Motor power: 3 kW Safety clearance: 140 mm Overtravel: 11 mm Overtravel time: 70 ms Further information according to the manufacturer - without guarantee Stroke: approx. 250 mm Thrust: approx. 270 mm Installation height: approx. 400 mm Table surface: approx. 800 x 500 mm Bore diameter: approx. 50 mm Ram surface: approx. 220 x 360 mm Weight: approx. 2.3 t Dimensions: approx. 1.8 x 1.5 x 2.7 m

Condition: good (used), Year of construction: 2021, operating hours: 3,280 h, Functionality: fully functional, machine/vehicle number: 33661, total width: 2,645 mm, total length: 10,665 mm, total height: 5,385 mm, rotor length: 2,000 mm, rotor diameter: 700 mm, nominal power: 294 kW (399.73 HP), TECHNICAL DETAILS Suitable for, for example: waste wood, pallets, railway sleepers, household waste, commercial waste, bulky waste, cable drums, tires, paper rolls, green waste, mattresses, roots, aluminum, food waste Engine: Scania engine, only 1,011 hours Drive power: 294 kW Discharge conveyor width: 1,400 mm Discharge height: max. 4,800 mm Shaft length: 2,000 mm Tool shaft diameter: Ø 700 mm Operating time: 3,280 h Waste wood capacity: up to 65 t/h Green waste capacity: up to 60 t/h Household waste capacity: up to 50 t/h Bulky waste capacity: up to 40 t/h Industrial waste capacity: up to 45 t/h Dimensions and weight Machine weight: 25.5 t Overall length: 10,665 mm Track length: 3,965 mm Total height (including loading opening): 5,385 mm Loading height: 3,150 mm Loading opening area (top): 750 mm Width (total): 2,645 mm Feed hopper width: 2,200 mm Dkshx Dxowhkp Semmel Discharge belt height (max.): 3,750 mm Discharge belt incline angle: 22.5° EQUIPMENT - Lifting magnet with hydraulic height adjustment via radio control - Extra-strong neodymium magnet - Aggressive feed - No winders - Four shredding programs for wood, green waste, garbage, and individual shredding - Shaft speed, direction of rotation, and reversing times freely programmable - Crushing bar with quick-change system - Convenient access to the shredding shafts - Color multifunction display for machine operation and data evaluation - Radio remote control for machine control

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,517 h, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 48, Bidding obligates the buyer to pick up the vehicle on time by May 30, 2025. Disassembly and loading available for an additional charge. Geometry report available! TECHNICAL DETAILS X-axis travel: 1,300 mm Y-axis travel: 800 mm Z-axis travel: 650 mm Control manufacturer: Fanuc Feed rate: 24,000 mm/min Clamping table Table dimensions: 1,550 x 800 mm Spindle-to-table distance: 250 - 900 mm Table load: max. 2.5 t Workpiece size: 1,550 x 800 x 550 mm Spindle Spindle speed range: 50 - 20,000 rpm Spindle power: 18.5 kW (S6) Torque: 95 Nm (S6) Tool holder: HSK63 Number of tool positions: 48 Coolant system External coolant pressure: 7 bar Internal coolant pressure: 40 bar Accuracy Positioning accuracy: ± 0.0025 mm Repeatability: ± 0.002 mm MACHINE DETAILS Width: 3,850 mm Depth: 4,090 mm Height: 3,560 mm Machine weight: 16,000 kg On-time: 38,291 h Machining time: 20,068 h Program on-time: 24,725 h Spindle on-time: 24,517 h Dohxowgbx Uj Dxmmokl EQUIPMENT - Electric handwheel - Chip conveyor - Paper belt filter - Internal & external air supply - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing - Manual flushing gun - Coolant temperature control - Machine documentation - Geometry report A separate tool changer can be used for dismantling and loading. Service providers can be arranged. Price: approx. €8,000

Condition: refurbished (used), Functionality: fully functional, overall weight: 11,000 kg, Year of construction: 1981, drive type: elektrisch, lifting capacity: 25,000 kg, Equipment: documentation/manual, General overhaul of the hoist in 2012 TECHNICAL DETAILS Lifting capacity: 25 t Crane span: 11,975 mm Cab span: 1,600 mm Cab hook path: 10,000 mm Number of wheels: 4 Crane wheel diameter: 500 mm Main frame Speed: 3.1 / 0.5 m/min Power: 15 / 2.5 kW Cab trolley Speed: 20 / 5 m/min Power: 1.25 / 0.32 kW Crane trolley Speed: 40 / 10 m/min Power: 1.2 / 0.25 kW MACHINE DETAILS Length: 12,000 mm Width: 1,600 mm Height: 1,000 mm Weight: 11,000 kg Electrical System Drive type: electric Operating voltage: 400 V / 50 Hz Control voltage: 230 V EQUIPMENT - Load hook Dehxjwfdncj Dxmmokl - Radio control - Inspection log included

Condition: ready for operation (used), Year of construction: 2007, operating hours: 30,692 h, Functionality: fully functional, machine/vehicle number: L2202520, turning length: 305 mm, turning diameter: 320 mm, bar diameter: 51 mm, TECHNICAL DETAILS Working area Max. cutting diameter: 320 mm Max. turning stroke: 510 mm Dkjhx Dxmowgltcjmsl Max. turned length: 305 mm Bar capacity: 51 mm Drive Motor power: 11 kW Control system Control system: Fanuc i-Series Turret Number of tool positions: 12 MACHINE DETAILS Machine weight: 3,500 kg Rated power: 23.68 kVA

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Dkjhxewc Shfs Dxmmel Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals

Condition: ready for operation (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 3182, pressing force: 200 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Dkjhx Dxjwhdn Iemmel Machine rebuilt in 2017! TECHNICAL DETAILS Max. pressure force: 200 t Year of manufacture: 1983 Year of rebuild: 2017 Motor power: 30 kW Safety clearance: 180 mm Overtravel: 18 mm Overtravel time: 90 ms Material feed Roll feed: 2 rolls Manufacturer: Eckardt

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC-426, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 510 mm CNC control: Heidenhain TNC-426 Table & Tool Changer Table size: 1,200 x 500 mm Tool changer capacity: 20 tools Feed and speed Rapid traverse speed: 20 m/min Spindle speed: max. 6,000 rpm Spindle and drive Spindle power: max. 13 kW Dkohx Dswfgnroxmmjl Tool holder: BT-40 EQUIPMENT - Electronic handwheel

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,088 h, Functionality: fully functional, working width: 900 mm, workpiece height (max.): 100 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, Deburring machine with 3 units and wet separator TECHNICAL DETAILS Working width: 900 mm Workpiece height: 100 mm Grinding belt and feed Grinding belt dimensions: 930 × 1,900 mm Feed speed: 2.5 – 14 m/min Unit speeds Dkjhx Dxswf Iqhjmmsl 1st unit, 2-speeds: 11 and 22 m/s 2nd unit, 2-speeds: 11 and 22 m/s 3rd unit: 18 m/s MACHINE DETAILS Dimensions (L × W × H): 2,300 × 1,500 × 2,300 mm Machine weight: 3,000 kg Operating hours: 10,088 h EQUIPMENT - W sanding belt unit - B brush unit for finishing sanding and light edge rounding - Roller unit (W) - Integrated extraction system W 2000 series wet scrubber with 3.0 kW power available; year of manufacture: 2021 Special sludge container available ATEX Zone 2

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, grinding width: 1,350 mm, TECHNICAL DETAILS Grinding width: max. 1,350 mm Belt change side: left Grinding units Number of sanding units: 3 (1x cross belt, 2x sanding pads) Sanding pad segment width: electronic / 25 mm Unit power ratings Cross belt power: 15 kW Combination unit power: 12.5/15 kW Shoe unit power: 15 kW EQUIPMENT - Vacuum table - Sanding belt blow-off device - Linked pressure bar - Cleaning brush Dkehxswfhgve Dxmmol - Bütfering application control

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: P5276678, ram adjustment: 70 mm, stroke adjustment: 100 mm, pressing force: 35 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Nominal force: 35 t Stroke adjustment: 8 - 100 mm Ram adjustment: 70 mm Dshx Dswhdh Isxmmekl Stroke rate: 130 / min Motor power: 3 HP Other auctions from the same location: Further information according to the manufacturer - no guarantees given Ram surface: approx. 350 x 180 mm Space required: approx. 1.0 x 1.6 x 2.3 m

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 6 mm, cutting length (max.): 3,050 mm, cutting angle (max.): 2 °, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 6 mm Cutting angle: 2°30' - 0°30' Backgauge: 1,000 mm Power and hydraulics Strokes per minute: 11–24 Oil capacity: 155 l MACHINE DETAILS Overall length: 3,700 mm Overall width: 2,500 mm Dkohx Dxmowf Imijmjl Overall height: 1,900 mm Machine weight: 6,500 kg EQUIPMENT - Angle stop included - 3 front support arms included - Foot switch included

Condition: good (used), Year of construction: 2009, Functionality: fully functional, sheet thickness (max.): 6 mm, cutting length (max.): 4,050 mm, TECHNICAL DETAILS Dkohx Djwf If Esxmmel Sheet width: 4,050 mm Sheet thickness: 6 mm Control system: ELGO P50 Hydraulics and energy Oil volume: 300 l Total power requirement: 15 kW MACHINE DETAILS Machine weight: approx. 9,000 kg EQUIPMENT - Sheet support device included - 4 support arms included - 1 side stop included - Finger guard included - Light barrier behind the machine included - Foot switch included

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, pressing force: 125 t, throat depth: 300 mm, distance between stands: 3,050 mm, bending length: 3,550 mm, stroke distance: 240 mm, TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Distance between columns: 3,050 mm Column overhang: 300 mm Ram stroke: 240 mm Hydraulics and Energy Oil volume: 200 l Total power requirement: 11 kW Control system Control system: Cybelec DNC 70 MACHINE DETAILS Overall length: 4,500 mm Overall width: 2,200 mm Overall height: 3,000 mm Machine weight: approx. 14,000 kg EQUIPMENT - Manual crowning available - 3 manual stop fingers available - Die shift available Djhx Dowf H Tuexmmokl - Pneumatic top tool clamping available - Foot switch available

Condition: ready for operation (used), Year of construction: 1999, operating hours: 76,276 h, Functionality: fully functional, pressing force: 50 t, distance between stands: 1,040 mm, bending length: 1,270 mm, TECHNICAL DETAILS Pressure: 50 t Bending length: 1,270 mm Folding column width: 1,040 mm Control system Control system: Cybelec / Delem Dshx Dxewf Hh Ejmmekl Controlled axes: y1, y2, x, R, z1, z2 MACHINE DETAILS Total power requirement: 8.6 kW Machine weight: approx. 4,750 kg Space required: approx. 2,000 x 2,100 x 2,400 mm Operating hours: 76,276 h EQUIPMENT - Side safety doors - Material support arms - Foot switch - 4 manual stop fingers