Used Glob-Ram Rm140 for sale (3,560)

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 5,000 kg, Crane arm ISO class: ISO class 4 = 5,000 - 10,000 kg Kjdpfjw Egl Dsx Ac Ajdl Condition: Ready for use and fully functional Technical condition: good Description: Year 2019, ISO 4A (61 cm), capacity 5,000 kg, length 4,000 mm, ID OS1589

Condition: used, functionality: fully functional, stroke length: 25 mm, table width: 100 mm, table length: 160 mm, throat depth: 80 mm, total length: 220 mm, total width: 100 mm, overall weight: 17 kg, installation height: 140 mm, ram adjustment: 77 mm, space requirement length: 220 mm, space requirement width: 100 mm, Toggle Press / Hand Lever Press with Square Ram Make: Steinel Type / Machine Number: PHK 8 Press Force: 6 kN Table Size: 100 x 160 mm Throat Depth: 80 mm Stroke: 25 mm Installation Height: 63 – 140 mm Kedpfjxyw A Hex Ac Asdl Height Adjustment: 77 mm Ram Bore: Ø 10 mm Machine Weight: 17 kg Space Requirement: 100 x 220 x 600 mm

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Kjdpoyzcvwsfx Ac Ajdl Operating manual available

Condition: used, INDRAMAT TYPE: CLM1.2/CLM1.3 - CLM01.3-X-0-2-0-FW Servo Controller The function is flawless, there are the usual signs of use and the device comes Kdodpfx Acsy Tbzco Ael from a running system

Condition: good (used), Year of construction: 2014, For Sale: Brand: Tramper type: NWL5300 model: Standard container lifter / tipper capacity: 200 Litres Kdjdpfxjx H Smpj Ac Ajl pneumatics: Festo dimensions Length x width x height: 1200mm x 1570mm x 5500mm weight: 1000 KG fully stainless steel includes 3 standard containers of 200 Litres each The lifter/tipper can be inspected on site. Transport by arrangement. Price includes loading for transport. If you have any questions or remarks, please do not hesitate to contact. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Kjdoy S Abuspfx Ac Asdl Space requirement (W x D): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Condition: used, Indramat power supplies and drives Kdedpfx Ajxrf Twsc Aol

Condition: excellent (used), Year of construction: 2018, Baler, Bramidan B20 - second-hand - : Price ex location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical raw material balers B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Pressing force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Motor (kW) 4.0 Cycle time average (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of tie-downs 4 Type of strapping Strap Finished bale light Yes Bale ejection Automatic The classic among raw material balers The B20 is versatile and is used everywhere. The recyclable materials must be "dry & soft". Particularly suitable for raw materials such as cardboard, paper, cardboard packaging (PPK) and film. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 high on one; enormous space saving. Simple bale strapping Automatic bale ejection Short cycle time thanks to high speed Strap rollers mounted on the front allow installation directly on the wall Pallet-sized bales that can be stored outdoors under cover Kjdpfxorl I Ivs Ac Asdl 3xx230x-440 4kW Amps: 25/16 dB 62-64 Condition: good - very good Available: immediately Location: 09116 Chemnitz

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Kdsdpfoy R Npcjx Ac Ael Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Kedpfx Aey Siftsc Aodl

Condition: ready for operation (used), Indramat CPUB 01-01 CPU module, used, good condition, 100% functional Kdsdpfx Aei Ebb Asc Ajl

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC main spindle drive SN:230902-761859-015, used, normal signs of use, 100% functional, delivery as per photos. Kedpfx Acox Etxdo Aedl

Condition: good (used), Year of construction: 2017, For sale / on request: - Kaak Driem line 1 Kjdpfoy Rkrrex Ac Aedl - Kaak Proofer + Euroclima - Kaak Driem line 2 - AMF / Den Boer oven (direct high-temperature fired oven) - Stelram conveyors - Cooling tunnel + ICS chiller - 2x ABB pick and place robots - 2x Fuji packaging machines Total working width: 1200 mm Year of construction: 2017 Documentation and software available. Inspection on location possible. For any questions or remarks, feel free to contact us.

Condition: used, Year of construction: 2006, machine/vehicle number: 2106008-27648, total weight: 2300 kg, with loading bucket Kedjy Rvpispfx Ac Ajdl

Condition: used, Year of construction: 2007, Unladen weight: 1330 kg Kjdpfey Rvrdex Ac Ajdl

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake Kdodpfx Ajy N A Aajc Aol -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor Kdedperqipnefx Ac Ajl -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: ready for operation (used), Indramat 109-0780-4B01-01 TKF3 tacho SN:248222-60354, used, in good condition, 100% functional, scope of delivery as per photos. Kdedey Nrw Topfx Ac Asl

Condition: ready for operation (used), Indramat KDS 1.1-50-300-W1 AC Servo Controller / Servo Drive SN: 01517D, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Kodsy Nrxdepfx Ac Aedl

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 DC servomotor, SN: 35432, used, in good condition, 100% functional, scope of delivery as shown in photos. Kdedpoy Npfhefx Ac Ael

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 DC servomotor SN: 35638 - Cover missing, see photos, used, minor signs of use, 100% functional, delivery as per photos. Kdedsy Npfnepfx Ac Aol

Condition: ready for operation (used), Indramat 2AD132B-B050A1-BS03-B2N1 3-phase induction motor SN: 2AD132-14444, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kdsdpfji D Ifvox Ac Ajl

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Kodpfxji D Ihue Ac Aedl

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV Permanent Magnet Motor SN:MAC093-32704 + Stegmann DG 1604 2500 PULS / REV encoder SN:330003657, used, normal signs of use, 100% functional, scope of delivery as per photos Kdjdpoi D In Tefx Ac Ael

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN:51095 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Kdodpei D Iqkefx Ac Aol