Used Glob-Ram Rm120 for sale (22,699)

Condition: used, Year of construction: 2007, operating hours: 15,000 h, Functionality: fully functional, USED YOU-JI YV1000 ATC 2-axis CNC VTL - YOM 12/2014 – SERIAL NUMBER 07V10T1566 TABLE Djbu Tsvnclyea Uujkl Table Diameter 1000 MM Table Speed (2 gears) 2 ~ 850 RPM Max. Table Torque 10000 Nm CAPACITY Maximum Swing Ø 1150 MM Maximum Turning Diameter Ø 1100 MM Maximum Turning Height 800 MM Maximum Load on Table 4000 KGS TRAVEL X-Axis Travel (Saddle Horizontal) 820 MM Z-Axis Travel (Ram Vertical) 800 MM Vertical Travel of Crossrail 500 MM FEEDRATE X-Axis Rapid Traverse 20 M / MIN Z-Axis Rapid Traverse 20 M / MIN Cutting Feedrate 0.001 ~ 500 MM / REV Manual Feedrate 0 ~ 1260 MM / MIN ATC / TOOLING ATC Capacity 12 Stations Tool Shank Type BT50 MOTORS Main Spindle Motor (30 Mins / Cont.) 30.0 / 37.0 KW X-Axis Servo Motor 3.8 KW Z-Axis Servo Motor 3.8 KW Coolant Pump Motor 0.18 KW TANK CAPACITIES Hydraulic Tank 65 L Coolant Tank 300 L Gearbox Lubrication Tank 50 L Slideway Lubrication Tank 4 L POWER SOURCES Input Power Supply 415V / 50HZ / 3PH Power Capacity 80 KVA DIMENSIONS & WEIGHT Floor Space including swarf conveyor & walk round space 5442 x 5999 MM Machine Weight 16,000 KGS ADDITIONAL FEATURES & OPTIONS  Tooling Package  Transformer  Swarf Conveyor  Air and washdown guns  Operators Platform  3 jaw hydraulic chuck & hard jaws  15000 Hours of Actual Cutting Time

Condition: good (used), Year of construction: 1960, Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm Dkobujrgbvye Ta Uujl -Pitch: 48 mm/rev. -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Condition: excellent (used), Fries Research & Technology Device name: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series from Fries Research & Technology GmbH (FRT). These systems are designed for the non-destructive and non-contact analysis of surface parameters such as topography, roughness, coating thickness, and more. Features of the FRT MicroProf: Measurement modes: The device operates both as a 2D optical profilometer and as a 3D imaging system. A scanning method or a direct imaging sensor is used. Measurement range: Height range: Up to 3 mm, depending on the sensor used. Lateral resolution: Typically 1–2 µm, depending on the sensor configuration. Technical features: Modular multi-sensor design: Allows the combination of different sensors for different measurement tasks. High resolution: Offers measurements in the sub-nanometer range. Flexibility: Can be used for various applications in the semiconductor industry, microsystems technology, optics, automotive industry, and photovoltaics. Automation: Supports fully automated measurements for high throughput rates. Areas of Application The MicroProf® MPR 1250 is used in various industries, including: Semiconductor industry: For the analysis of wafers and microchips. Microsystems technology (MEMS): For the investigation of microstructures. Optics: For the measurement of surfaces in optical components. Automotive industry: For checking component tolerances. Photovoltaics: For the analysis of solar modules. Weight approx. 500 kg Condition: used Debswh Swdsu Ta Uuokl Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2025, operating hours: 21 h, Powerful low-lift pallet truck in top condition for sale! The truck is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR Electric Platform Low-Lift Pallet Truck 2000KG / 2400MM / 24V 205Ah Powerful electric low-lift pallet truck with a 2000kg load capacity and 2400mm forks. Designed for the simultaneous transport of two Euro pallets. ✓ 2000kg load capacity ✓ 24V 205Ah Li-Ion battery ✓ Includes quick charger ✓ Fully electric & self-propelled ✓ Ideal for large warehouses ✓ Extremely robust and reliable Pallet truck with steel frame for maximum comfort and driver protection Good maneuverability thanks to power steering and compact chassis Excellent working ergonomics – height-adjustable tiller, suspended driver's platform, and padded backrest High travel speed and gradeability Powerful vertical AC drive motor Automatic speed reduction when turning Reliable drive system The electric SCHORR pallet truck features a reliable drive system with a travel speed of 10 km/h and precise steering. It impresses with powerful performance and optimal stability during operation. Long service life The vertical transmission of the pallet truck is particularly robust and ensures a long service life. Easy to use The easy-to-operate pedal ensures a high level of driving comfort. The driver has good visibility and can lean against the protected steel structure. Ensuring operational safety The pallet truck's steel protective bars ensure safe operation even at higher speeds. The electric low-lift pallet truck also features an automatic speed control function when steering. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR20SLE (lithium battery) Load capacity: 2.0 t Model: 240E Weight including batteries: 765 kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 2381 mm Overall width: 734 mm Fork length: 2400 mm Length including fork face: 1234 mm Dksbu Tewh Nzgsa Uusl Stroke: 125 mm Fork dimensions DIN ISO 2331: 55 mm x 170 mm x 1150 mm Fork spacing: 685 mm Working aisle width for pallets: 1000 x 1200 crosswise 3017 mm Working aisle width for pallets: 800 x 1200 crosswise 2874 mm Turning radius: 2217mm Speed Travel speed with/without load: 8.5 km/h / 10.0 km/h Max. gradeability with/without load: 6% / 16% *Further technical data is available upon request. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Simply contact us, and we will advise you on the various options. We look forward to hearing from you! We at SCHORR are happy to answer any questions you may have about our high-speed machines. You can reach us by phone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: used, Year of construction: 1991, total height: 2,680 mm, total length: 4,500 mm, total width: 2,150 mm, Empty weight: 4.000 kg Dsbewhx E Ueu Ta Uuekl - Year: 1991 - Documentation available: Yes - Motor power: 15.0kW - Turning diameter: 360mm - Center distance: 805mm - Max. spindle speed: 4200rpm - Bore diameter: 80mm - Removable bed: Yes - Turning diameter removable bed: 600mm - Digital: No - Transport dimensions: 4500mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Redirack Technical specifications for installation: Number of rack rows: 1 Length per rack row: approx. 14,048 mm Number of bays per rack row: 5 x 2,710 mm Number of levels plus floor level: 2 The scope of delivery includes: 6x pallet rack uprights, used Material color: Sendzimir galvanized Frame type: H Profile dimensions: 83 x 85 x 2.5 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) 2,300 mm high 1,100 mm deep 20x pallet rack crossbeams, used Material color: yellow Box profile: 100 x 50 mm Hooks: 6 HK (hooks) Clear width: approx. 2,710 mm Max. load per pair of crossbeams: 2,000 kg, with uniform load. Distributed load 40x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized Debswhyqfju Ta Uuskl For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2014, USED HANKOOK VTC140E – YOM 2014 – Serial Number 44L09842 - TWW Cat 7962 MACHINE CONSTRUCTION & FEATURES • Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools. • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 24 Position Tool Magazine. INCLUDED FACTORY FITTED MACHINE OPTIONS • Chip Conveyor & Chip Bucket • 30 Bar Through Spindle Coolant System • Measurement System C-Axis Scale • Transformer • Hydraulic 3-Jaw & Manual 4-Jaw Combination Chuck With4 Manual Adjustable Jaw Bodies • Automatic Tool Setting Device TOOLING INCLUDED • DINE Tool-changeable Angular Milling Head with 40 ISO Output • 2 Off Sandvik Capto C6 Turning Toolholders with Two Outputs (V & H) • 1 Off Sandvik Capto C6 Axial Turning Head • 7 OFF BT50 Driven Toolholders • 1 Off Hankook TA12B4121015043 • 1 OFF Hankook TA12B412015142 • 1 Off Hankook TA12410000161 • 2 OFF Hankook TA12417010160 CAPACITY Maximum Turning Diameter - Ø 1,600 mm Maximum Turning Height - 1,400 mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,400 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 0 ~ 1,200 Deg / Min Max. C-Axis Speed - 3.333 RPM RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220 x 220 mm MILLING SPINDLE Milling Spindle Speed - 30 ~ 3,000 RPM Max. Milling Spindle Torque - 235 Nm TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,600 mm Z-Axis Travel (Ram Vertical) - 900 mm Maximum X / Z-Axis Cutting Feedrate - 7,500 mm / Min X / Z-Axis Rapid Feedrate - 7,500 mm / Min ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 24 (12T & 12M) Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 37.0 / 45.0 kW Milling Spindle Motor Power - 15.0 / 18.5 kW Dkjbouu Rz Ssu Ta Uujl X / Z-Axis Servo Motor - AC 7.0 kW C-Axis Motor - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height - 5,535 mm External Width (With Chip Conveyor) - 6,760 mm External Depth - 4,565 mm Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Levelling Blocks • Patrol Lamp (Red, Yellow & Green) • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals

Condition: good (used), Item: D-1717-Fischer Labeler Fischer Labeling Double machine Debu Ta Uoidmvroujkl Mount at stainless steel frame. Adjustable position of labels. Transport conveying belt 1600 x 200 mm. Labeling at top and from side of product! Label width max. 100 mm? Sensor read Stationed in Denmark!

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, total length: 11,055 mm, total height: 4,140 mm, net weight: 45,000 kg, total depth: 6,320 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dsbev Sfmusu Ta Uuokl Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: ready for operation (used), Year of construction: 2000, x-travel 1016 mm y-travel 610 mm Dkjbu Taevzhhae Uuol z-travel 760 mm control Heidenhain iTNC426/430M table-size 1270 × 590 mm table load max. 900 kg tool taper ISO 40 distance spindle nose and table 80 - 840 mm distance spindle center to column 635 mm feeds x/y/z -stepless 3000 UpM rapid traverse 20 m/min Number of working hours 34307 h spindle turning speed range 8000 U/min spindle drive 11 kW tool changer number of tools 24 tool changing time 8 sec max. workpiece length 300 mm max. tool weight 8 kg weight of the machine ca. 6,7 t dimensions of the machine ca. 2,75 x 2,12 x 3,3 m 3-axis machining center, ZPS/Depo, with Haidenhain iTNC430 control and 24-way tool changer. Program run: 34,307 hours. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1999, total height: 2,100 mm, total length: 4,500 mm, total width: 2,450 mm, Empty weight: 2.550 kg Travel: 500x350x300mm Max. workpiece: 1050x800x295mm / 800kg Dkjbswhxp Hsu Ta Uujl With a lot of belogings - Year: 1999 - Documentation available: Yes - CE mark available: Yes - Serial number: 58k20365 - Control: CNC - Transport dimensions: 4500mm x 2450mm x 2100mm (l x w x h) - Transport weight [kg]: 2550kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 29110003614, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Dsbu Towh Nikea Uuekl Transport dimensions: 4100 x 2500 x 3000 mm

Condition: repair required (used), Year of construction: 1997, Functionality: limited functionality, Used Soraluce model SP 10000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 60-station automatic tool changer and Siemens 840D control system. Serial Number: 108537. YEAR OF MANUFACTURE: 1997. TABLE LENGTH 10000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 8500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 60 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Coolant system with 500 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Heidenhain linear scales, Linear recirculating slideway system. Dobu Taewgd Rme Uuskl With 1000mm diameter integrated horizontal/vertical rotary table. LENGTH 14,785 MM WIDTH 4,770 MM HEIGHT 4,420 MM WEIGHT 30,000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Year of construction: 1998, Condition: used, Trepko-Cup Filling Trepko filling machine for rectangular cups Dsbu Ta Uefw A U Dsuokl Year of production: 1998 4 lines machine Stationed: Denmark That Has been used for butter filling Filling volume: 200, 250, 400 & 500 gram.

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Djbuov Sfn Ee Ta Uuskl Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: good (used), Functionality: fully functional, mileage: 277,970 km, power: 250 kW (339.91 HP), first registration: 03/2005, overall weight: 25,000 kg, fuel type: diesel, color: silver, axle configuration: 6x2, operation weight: 25,000 kg, maximum load weight: 12,130 kg, empty load weight: 12,870 kg, tire size: 315/80R22,5, next inspection (TÜV): 10/2025, fuel: diesel, wheelbase: 3,680 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, loading space volume: 8.5 m³, loading space width: 2,440 mm, loading space length: 4,760 mm, loading space height: 700 mm, Year of construction: 2005, Equipment: ABS, additional headlights, air conditioning, crane, cruise control, differential lock, hydraulics, onboard computer, parking heater, soot filter, traction control, trailer coupling, Mileage: 277,970 km Truck model: FM/FH-6X2R FM9, FM12, FH12 with HIAB 122ES-2 HIPRO with three-way tipper Model of the loading crane: Type: HIAB 122ES-2 HIPRO - 2x hydraulic outriggers - 1x manual outriggers - radio remote control - hydraulic outriggers - Lifting weight: 5,100kg at 2.1m - Maximum horizontal reach: 8m with 1,440kg lifting capacity - Lifting height: 10.5m - with grapple - Hydraulic connections at the end of the crane - Year of construction: 2005 Meiler three-way tipper Hydraulics (PTO) Auxiliary heating Antennas Radio/cassette/CD/MP3 Air conditioning Air-suspended seat with seat heating and fully adjustable Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Fog lights High beam Storage box Dsbu Tajwh Tq Ee Uuekl Emission class: EURO3 Wheel formula: 6x2 Differential lock Wheelbase axle 1 and 2: 3,680mm Wheelbase axle 2 and 3: 1,360mm Tire size axle 1 (front): 315/80R22.5 Tire size axle2 (rear): 315/80R22,5 Tire size axle3 (rear): 315/80R22,5 Leaf suspension / leaf spring suspension Wheel cover Unladen weight: 12,870 kg Payload/load: 12,130 kg Permissible total weight: 25,000 kg Total vehicle dimensions (length x width x height): 850cm x 250cm x 370cm Body dimensions outside or inside: (length x width x height): 476cm x 244cm x 70cm With new TüV and AU by arrangement for an extra charge! You can also contact us for more information and pictures via WhatsApp: WhatsApp, Telegram, Viber, Signal Trade-in possible! Also available on request! Price is net! We can transfer your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle for you worldwide! Export license plates on request! We support you with the export, original data confirmation for country homologation, supplier declaration, preparation of export documents and customs license plate production, if required A viewing and test drive is possible at any time, even at the weekend, by telephone arrangement! Disclaimer: The buyer is obliged to independently check the condition, dimensions and equipment of the goods/vehicles. All information is without guarantee. Subject to alterations, prior sale and errors excepted.

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Volume: 220L Sleeve-diameter: 250mm Diameter: 1190mm Input-height: 1070mm Dobu Tewhxniea Uuokl Output-height: 645mm - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 40078/07 - Control: Conventional - Motor power: 3.0kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2008, Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via control: 25 - 235 m/min chip conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours Further technical data see photo or on request Machine weight: approx. 3 t Dkjbu Tajvxqtae Uuel

Condition: used, Year of construction: 1998, Functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. Dobujwgd Rge Ta Uuokl TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Year of construction: 2022, operating hours: 4,235 h, Condition: used, Please contact ATS Norway AS for more information Please provide reference number upon request: 18235 Specifications: - 2022 model - 4235 Hours - 400 Volts - 50 Hz - 90 kW - 158.7 A - Telescopic legs - Vacumsilo 1m3 frame with telescopic legs - Industrial vacuum cleaner - Dry sucks - Flanges the shift - The cyclone separator for the silo has been replaced - Delivery by agreement Description: All filters are new and unused and the cyclone separator and damper valves on the suction have been replaced and reinforced. It comes with 1 extra cyclone separator which is reinforced inside, as are flanges for valves. Debu Tsvg Rb Tja Uuskl Delivery by agreement Hours: 4235 Kw: 90

Condition: used, Year of construction: 1986, Bending length 3600 mm Max. pressure 175 ton Length of stroke 400 mm Working radius in frames 300 mm Controlled on 4 axis (Y1-Y2-X-R) Controlled crowning Control: Cybelec ModEva 10 S Equipped with: Pneumatic clamping of upper & lower tools Various tools (7-12-16-24-32 mm) lower tools & 4 pcs. upper tools Debusv Hy U Nj Ta Uuokl

Condition: used, total height: 1,400 mm, total length: 600 mm, total width: 600 mm, outer dimension length: 600 mm, Empty weight: 200 kg Dksbu Taowhxfns Uuel - Documentation available: No - Grinding diameter: 32mm - Transport dimensions: 600mm x 600mm x 1400mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2022, Condition: used, New: No Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 18239 Specifications: - 2022 model - 3029 Hours - 400 Volts - 50 Hz - 90 kW - 158.7 A - Telescopic legs - Vacumsilo 1m3 frame with telescopic legs - Industrial vacuum cleaner - Flanges the shift - The cyclone separator for the silo has been replaced - Delivery by agreement Description: All filters are new and unused and the cyclone separator and damper valves on the suction have been replaced and reinforced. Debovg Rbmju Ta Uuokl It comes with 1 extra cyclone separator which is reinforced inside, as are flanges for valves. Delivery by agreement Hours: 3029 Kw: 90

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Max. workpiece: 80mm Sleeve-diameter: 250mm Input-height: 860mm Output-height: 830mm Dobu Ta Ujwhxfhouokl - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 40080/70 - Control: Conventional - Motor power: 0.8kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2014, total height: 2,030 mm, total width: 900 mm, total length: 2,000 mm, outer dimension width: 900 mm, Empty weight: 610 kg - Year: 2014 - Documentation available: Yes - CE mark available: Yes - Control: Conventional - Motor power: 2.2kW - Table width: 430mm Dsbu Taewhmmme Uujkl - Table length: 1050mm - Ram length: 85mm - Min. stroke: 0mm - Model: Hydraulic - Max. stroke: 235mm - Number of columns: 2 - Height adjustment: 1000mm - Power: 100.0ton - Transport dimensions: 2000mm x 900mm x 2030mm (l x w x h) - Transport weight [kg]: 610kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren