Used International 955 for sale (9,642)

Condition: like new (used), Functionality: fully functional, Very nice Shoei folder type Mach Eight for sale. with 2 pockets and electric knife 35000 p/h. This machine has not been running for about 10 years. As a result, the rubber on the rollers has become soft and damaged. Fslowglf Een Ewtgjpg We replaced the rollers on 29-4-2025. This machine has been fully checked on mechanical parts and electrical parts and adjusted. This machine has no defects or damage. And functions 100% and complete with all accessories. Can be taken into production for a long time. Of course you are welcome to test this machine with us. We can arrange the transport/packaging for you and load it into a truck or container. Ask for a price including transport (location the Netherlands). Regards Henk Hoos.

Condition: used, mileage: 354,438 km, power: 65 kW (88.38 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,200 mm, first registration: 01/2015, fuel tank capacity: 72 l, emission class: euro5, number of seats: 3, number of previous owners: 3, Year of construction: 2015, Equipment: ABS, air conditioning, airbag, electronic stability program (ESP), immobilizer system, sliding door, traction control, trailer coupling, General information Number of doors: 4 Model range: Sep 2014 - Aug 2016 Cab: single Technical information Torque: 230 Nm Number of cylinders: 4 Engine capacity: 1.598 cc Transmission: 6 gears, Manual gearbox Acceleration (0-100 kph): 18,9 s Fpsln Ewswgk Dajtgeg Top speed: 157 km/h Measures Dimensions (LxBxH): 514 x 193 x 197 cm Weights Empty weight: 1.845 kg Carrying capacity: 955 kg GVW: 2.800 kg Interior Interior: black Environment CO2 emission: 166 g/km Consumption Average fuel consumption: 6,3 l/100km (45 MPG) Urban fuel consumption: 7,8 l/100km (36 MPG) Extra urban fuel consumption: 5,4 l/100km (52 MPG) Maintenance, history and condition APK (MOT): tested until 01/2026 Number of keys: 2 (2 hand transmitters)

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Fjlsflz Inen Ewtgjpg The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 650 mm largest grindable workpiece diameter 360 mm max load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Felnotqf Sqo Ewtgspg Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: new, mileage: 100 km, power: 129 kW (175.39 HP), overall weight: 8,550 kg, fuel type: diesel, color: white, maximum load weight: 8,550 kg, fuel: diesel, wheelbase: 3,850 mm, gearing type: automatic, emission class: euro6, loading space width: 2,200 mm, loading space length: 4,500 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, crane, electronic stability program (ESP), onboard computer, trailer coupling, We offer you Mitsubishi Fuso Canter 9C18, Crane Fassi , 4,5 m aluminum flatbed Model: Mitsubishi Fuso Canter Vehicle type: 9C18 AMT Engine power: 129 kW (175PS) Wheelbase: 3850 mm Gross vehicle weight: 7490 kg (or 8550 kg) Vehicle equipment Engine Engine, R4, 129 kW (175 hp), 3500 rpm OM5 engine version, Euro VI OBD Step E, Canter Engine, start/stop system VA6 Manual control unit Engine speed Clutch & transmission DUONIC©, dual clutch transmission Axles & suspension A86 differential lock with limited slip Axle ratio i = 5.714 (Canter) Wheels & tires RN2 steel wheel 17.5 x 6.00 Spare wheel holder, simply secured Spare wheel/spare wheel rim RM5 Traction tire, rear C27MJB 1F 2x 205/75 R17.5 Regio all-round Continental Hybrid LS3 C27MLB 1F 4x 205/75 R17.5 Regio drive Continental Hybrid LD3 C27MJB 1F 1x 205/75 R17.5 Regio all-round Continental Hybrid LS3 Frame & frame attachments CR8 body brackets on the vehicle frame Main tank 100 liters Elimination of underride guard, rear Electronic Stability Program (ESP) Disc brakes on VA and HA ABS with electronic brake force distribution Exterior cab Comfort single cab Tiltable cab F62 Rear-view mirror, heated VB4 Medium-length mirror holder incl. wide-angle mirror Central locking, separate radio remote control Immobilizer, with transponder Cab interior Driver's seat armrest SH6 Driver comfort suspension seat, horizontal suspension Adjustable steering column holder SA5 Airbag, driver Vinyl floor covering Power windows for driver/passenger door, electric Tachograph, digital 4.0 (2 drivers) Instrument lighting, infinitely variable JW0 Reversing alarm EF8 Radio with Bluetooth H07 Air conditioning Glove compartment, lockable Central storage compartment, instrument panel Storage box on rear wall of cab Storage compartment, between the front seats Storage compartment above windshield, 1 compartment Electrics / electronics EE9 batteries, 2 x 12 V/100 Ah, maintenance-free Fjln Ewtowhi R Ujgspg OT6 Battery cover, double OV2 Preparation for battery cut-off relay 12V Daytime running lights, automatic Speed limit 90 km/h, EC Emergency Brake Assist System (AEBS) Lane Departure Warning System (LDWS) OE1 Hill start assist Further delivery items S8AA1N First aid kit S8AB2N Fire extinguisher S8AA2N Warning triangle YA0 Removal of reflector brackets, on frame C60 License plate holder, front Flatbed Body dimensions Internal length 4500 mm Internal width 2200 mm Intermediate frame made of steel, galvanized Undercrane frame A free space of approx. 800 mm (for later installation of the crane by the customer) Front posts made of aluminum Aluminum center posts, removable Aluminum rear posts, bolted Front wall made of plywood up to 600 mm high Aluminum side walls, height 400 mm, 2 per side Aluminum rear wall, height 400 mm Waterproof plywood floor with non-slip surface, 18 mm thick Handles for load securing in the edge 5 pcs./side AHK 3500 kg Crane Fassi M40.A.1.12 3.60 m - 1120 kg 4,70 m - 845 kg Daily registration Financing, leasing, cash Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany Mon.-Fri . from 10.00 to 17.00 On Saturday we like to meet but by appointment we speak German we speak English mówimy po polsku govorim po Russkij

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, turning diameter: 410 mm, spindle bore: 91 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 670 mm, bar diameter: 80 mm, CNC Fanuc 18i - T WORKING RANGE Max. workable bar diameter: mm 80 Max. diam. workable from recovery: mm 410 Max. workable length: mm 670 Max. rotating diameter: mm 600 MAIN SPINDLE Max. rotation speed: rpm 3,500 Spindle nose: ASA 8 “ Spindle hole: mm 91 Internal diameter of bearings: mm 140 Motor power: kW 22 Motor torque: Nm 539 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction Automatic positioning of B-axis: mm 660 B-axis rapid: m/min 15 TURRET Number of positions: N° 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32-40-50 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: N° 12 Max rotation speed: 4,000 rpm Motor power: 3.7 kW Motor torque: 70 Nm C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: 100 rpm Fpolnewhm Rrj Ewtgog AXES X-axis stroke: 255 mm Z-axis stroke: 670 mm Y-axis stroke: 110 mm (+ 60 / – 50) X-axis rapid: 20 m/min Z-axis rapid: 24 m/min Y-axis rapid: 7.5 m/min COOLANT Tank capacity: 250 l Pump flow rate: 120 l/min Pump motor power: 0.75 Kw DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: 4.450 x 1.900 x 2.100 mm h Height of spindle center: mm 1.600 Weight with chip conveyor: Kg 6.300 Machine equipment: • Self-centering hydro-divider Autoblock type AXN 315 mm • Various motorized tool holders (radial and axial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2013

Condition: like new (used), Functionality: fully functional, mileage: 211,249 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 3,500 kg, loading space length: 4,170 mm, loading space width: 2,100 mm, loading space height: 2,110 mm, emission class: euro6, color: white, suspension: steel, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, VOLKSWAGEN CRAFTER 2.0 TDI 150 HP - YEAR 2022 - KM 211249 - CC 1998 - HP 140 - KW 103 - EURO 6 - ABS - AIR CONDITIONING - CENTRAL LOCKING - CABIN SEATS 3 - RADIO - ELECTRIC MIRRORS - ELECTRIC WINDOWS - REAR LOCK - PAYLOAD 1150 Kg - INTERNAL LENGTH 4170 mm - WIDTH 2100 mm - INTERNAL HEIGHT 2110 mm - FOR INFO FRANCESCO 3356514297 Fpoln Ewtowhzmbogog

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Fpsln Eewc U Izswtgeg Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: refurbished (used), Year of construction: 1990, Karstens K11 1000 full equipment The cylindrical grinding machine was completely overhauled at PS-Karstens. The machine is inspected and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Technical data: Center width: 1000 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Digital displays for grinding spindle B axis ,workpiece spindle, X, Z axis from HEIDENHAIN Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat Fsln Ewjh Riwdjtgspg

Condition: used, Year of construction: 1970, material width 200 mm coil weight 0,075 t coil internal dia. 290 - 450 mm coil external diameter 800 mm 26 U/min Fjln Ewtevzxtgsgspg power requirement 0,25 kW Dimensions (WxDxH) 0,9 x 0,8 x 1,7 m motoric driven, with manual centralized expansion as is where is, WITHOUT any additional work (see video)

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 750 mm center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder correction quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 12,5 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Fpelnsh Rftlj Ewtgjg Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: net 3500 Kg Infeed drive by DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Feed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm coil internal diameter 400 - 510 mm coil external diameter 1200 mm no. of straightening rolls 7 straightening roll diameter 50 mm Fpsln Ewsvuk Shjtgeg number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m Straightening machine with infinitely variable drive, straightening rolls individually manually adjustable, pneumatic alligator opening of the roller cassette Decoiler with pneumatic lag break, manual centralized expansion as is where is, WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 750 mm center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder correction quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 12,5 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Fpelnsiv Audo Ewtgsg Hydraulic tank 80 liters Machine weight: net 3500 Kg Infeed drive by DC motor Air cushion supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Feed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: used, Year of construction: 1976, material width 400 mm coil weight 3,0 t coil internal diameter 460 - 560 mm coil external diameter 1500 mm material thickness 0,6 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm number of draw-in rolls 2 x 120 mm power capacity 5,0 + 1,5 kW dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m weight decoiler 1,8 t Fpoln Ewtevzxq Eegjg dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m weight straightener 1,3 t Straightening machine (type RS 67-04 / 0) with geared motor, driven lower straightening rolls, straightening rolls hardened and polished, straightening rolls individually manually adjustable, pneumatic intermediate lifting of the in-feed rolls, roller basket, coil loop control Decoiler (type BA 1-04/030) not driven, with lag break, manual centralized expansion, hydraulic snubber roll, lateral movement, hydraulic lifting table as is where is, WITHOUT putting into operation

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Fpjlnsiv Au Ee Ewtgog Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. spindle. New infeed control digital with Siemens panel and Siemens SPS for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel scale in X and Z axis make HEIDENHAIN. similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: used, Year of construction: 1979, material width 150 mm coil weight 1,5 t coil internal diameter 500 mm coil external diameter 940 mm strip material 20 x 1,0 - 50 x 4,0 / 200 mm wire diameter 1,0 - 5,0 mm power requirement 0,7 kW Fpsln Ewtovuk R Djgsg weight 0,7 t Dimensions (WxDxH) 1,0 x 1,7 x 2,0 m motoric driven palett decoiler band material approx. 20 x 1,5 mm - 50 x 4,0 mm / 200 x 2,0 wire diameter approx. 1,0 - 5,0 mm can be inspected in running condition in our warehouse

Condition: refurbished (used), Year of construction: 1988, Karstens K11 650 The cylindrical grinding machine was completely overhauled at PS-Karstens. The machine is checked and in a very good condition. Since we are specialized in Karstens cylindrical grinding machines, we can offer you the complete service (electrical and mechanical) for the machine after purchase. Technical data: Center width: 650 mm center height: 180 mm workpiece weight: 100 kg flying, 250 kg between centers grinding wheel diameter: 400 mm workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment quill force: 200-600 N, hydraulically operated via foot pedal table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm grinding spindle motor outside: 4 KW Fpeln Eeh Rixxswtgjg grinding spindle motor inside: 2,2 KW workpiece spindle motor: 0,55 KW Machine weight: Net 3800 Kg Infeed drive via DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. Infeed control for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes Paper belt filter automat approx. 250 L similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t Fjln Ewtsvuungegopg coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Foln Eweh Rimmetgjpg Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. New infeed control digital with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: used, Year of construction: 1986, material width 300 mm coil weight 0,5 t Fpsln Ewsvuufrjtgog coil internal diameter 420 - 520 mm coil external diameter 1400 mm weight 0,6 t dimensions (WxDxH) 0,8 x 1,2 x 1,7 m WITHOUT drive, with pneumatic lag brake, pneumatic centralized expansion as is where is, in given condition

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 1000 mm largest grindable workpiece diameter 360 mm max. load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Fslnstqf Rze Ewtgspg Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 Fpjlnsvuudue Ewtgog roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm coil external diameter 1500 mm power requirement 1,0 kW weight 1,5 t dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion Feln Eovuuapowtgepg as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 2004, material width 250 mm coil weight 2 x 3,0 t material thickness 1,5 - 6,0 mm coil internal diameter 470 - 530 mm coil external diameter 1800 mm material cross-cut 6,0 bei BB100 / 3,8mm bei mm² Fsln Ejvut Ulowtgjpg no. of straightening rolls 21 straightening roll diameter 30 mm number of draw-in rolls 4 speed - 20 m/min power requirement 18,0 kW Weight 4,2 t Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m Weight 2,40 kg dimensions (WxDxH) 2,0 x 2,1 x 2,2 m Decoiler AH 3000/2/250/ST with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting Straightening machine RM 3025.4/21 with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls coil loop control via ultrasonic

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm weight of the pulling device 1,15 t required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll Fpelnovut The Ewtgeg pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm