Used International 833 for sale (9,203)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: Ijdpfx Asrtrvyof Sebf -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Iodpfx Afewwar Io Sebf Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Euro 5 Wheelbase: 490/135 cm 6x2 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Ijdpfxjx Ip A Dj Af Sebf Gearbox: Automatic

Condition: used, Used approximately 1500 litre continuous Eirich model RV19 batch mixing system. The RV19 mixer has approximately 36m3/h (50 tonnes/hour) throughput. Unit is rated atmospheric internal pressure. The system includes: - (3) Additive dosing hoppers - A 1 tonne bagging system - DCE-Unimaster LEV system - Discharge chutes and feed screws - Siemens PLC control unit - Weighing scales with digital readout - Ingersol Rand air compressor - (3) Loss in weight hoppers - Receiver hoppers with rotary valve feeds - Tubular screw conveyors - Bulk bag discharge unit and conveyor - Siemens touch control panel Iodpfx Aox Hv Rlef Ssbf - Emergency stop control panel - Associated steelwork and gantry

Condition: ready for operation (used), load capacity: 550 kg, nominal power: 69 kW (93.81 HP), Hindenlang TPEVA - 550 - Induction oven Kind of: Induction furnace Iedpfx Afsxpkhno Ssbf Max temperature: 850° Capacity: 900 x 750 mm x 550 kg Voltage: 400 V / 100 A

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Ibsdpjrtryyofx Af Ssf Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, machine/vehicle number: YV2X9J0A0FA78xxxx, mileage: 371,740 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 20870 Specifications: - 2015 Model - 371,740 km - I-Shift - Euro 6 engine - 340 hp - Tires (see pictures) - 4x2 - Suspension: full air - Zepro Lift - Remote control - Internal width: 2,368 m - Internal height: 2,620 m - Internal length: 7,659 m - Arka body - Full side opening - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2015 Volvo Fm 330 4x2 Box truck w/ full side opening for sale. The car works as it should according to the owner. All services have been done by the owner himself. The car is EU approved and can be put straight into production. Ready for delivery Km: 371740 HK: 340 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 10650 Total Weight: 21000 Isdpfxswv I Ihe Af Sobf Payload: 10275 Width: 255 Length: 1011 Euro: 6 Model: FM 330 Gearbox: Automatic

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Specifications: Capacity: 361.9 gal Diameter: 3.94' Height: 2.53' Type Of Heads: welded dished top and welded cone bottom Ibedsx Hwb Espfx Af Sjf Vertical/Horizontal: vertical Type of stainless: 316L Legs/Lugs: 4

Condition: ready for operation (used), Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power: 4.5 kW Isdpsx Imklefx Af Sjbf

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for Iedpfx Ajrtrxijf Ssbf the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, machine/vehicle number: YS2R6X4000218xxxx, mileage: 816,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 22062  Specifications: EU approved until 28.04.2026 Mileage: 816,000 km Transmission: Automatic Full air suspension 6x4 Tires in good condition Ibsdpfjx Ip R Ijx Af Sjf Refrigeration/freezer unit Euro 6, 660 hp 18-pallet box body Box body from 2019–2021 (to be confirmed by owner) Partition wall Internal length: 7.42 m Internal height: 2.85 m External height: approx. 4.2 m Bull bar Sand spreader Tool box Trailer hitch VBG coupling 2 bunks Radio/CD Climate control / AC Service history Video available Ready for delivery Description: 2022 Scania R660 6x4 box truck.The vehicle is EU approved and ready for delivery.18-pallet box with refrigeration/freezer unit, box body from 2019–2021.Possibility to purchase 3 identical trucks with approximately the same mileage. Km: 816000 HK: 659 Technical approved: Yes EU-approved until: 28.04.2026 Own weight: 13900 Total Weight: 28000 Payload: 14025 Width: 255 Length: 1021 Euro: 6 Model: 2022 Scania R660 6x4 Skapbil m/ Kjøl/frys aggregat Gearbox: Automatic

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs Ibjdpfxjx Hwbxe Af Sef

Condition: ready for operation (used), WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Ibsdpfx Afsx Imlcj Sef Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Condition: used, machine/vehicle number: YS2R6X4000218xxxx, mileage: 800,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 22064 Specifications: Iodpfx Afex Ip Ruo Sobf EU approved until 30.03.2026 Mileage: approx. 800,000 km Transmission: Automatic Full air suspension 6x4 Tires in good condition Refrigeration/freezer unit Euro 6, 660 hp 18-pallet box body Box body from 2019–2021 (to be confirmed by owner) Partition wall Internal length: 7.42 m Internal height: 2.85 m External height: approx. 4.2 m Bull bar Sand spreader Tool box Trailer hitch VBG coupling 2 bunks Radio/CD Climate control / AC Service history Video available Ready for delivery Description: 2022 Scania R660 6x4 box truck.The vehicle is EU approved and ready for delivery.18-pallet box with refrigeration/freezer unit, box body from 2019–2021.Possibility to purchase 3 identical trucks with approximately the same mileage. Km: 800000 HK: 659 Technical approved: Yes EU-approved until: 30.03.2026 Own weight: 14760 Total Weight: 28000 Payload: 13165 Width: 255 Length: 1021 Euro: 6 Model: 2022 Scania R660 6x4 Skapbil m/ Kjøl/frys aggregat. Gearbox: Automatic

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Isdpjx Hv U Refx Af Sebf Power: 11 kW

Condition: ready for operation (used), gebruiksonderdelen: diameter: 180 mm diameter: 260 mm Isdpfex Imm Tjx Af Ssbf

Condition: used, mileage: 192,304 km, Year of construction: 2013, Serial number: VF644AGE00001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20848 Specifications: - 2013 model - 192,304 km - Eu-approved until: 02.06.25 - Euro 5 engine - Automatic - 4x2 - 219 hp - Front suspension: steel - Rear suspension: air - Internal width: 2,462 m - Internal height: 2,408 m - Internal length: 6,522 m - Tires (see pictures) - Defective lift (due to hydraulic leak) - Zepro lift - Air conditioning/ac - Lights - Heated mirrors - Error codes - Ready for delivery Description: We have a 2013 4x2 Renault Midlum Box truck with a defective lift for sale. There is a defective lift on the car as it has a hydraulic leak. There is also a bad battery on the car. This may need to be replaced. There are also some error codes on the display (see pictures)  besides this, the car starts and works according to the owner. Errors and deficiencies exist and some additional costs must be expected. Ready for delivery. Km: 192304 Ibsdpjwvywhjfx Af Sjf HK: 219 Technical approved: no EU-approved until: 02.06.2025 Own weight: 5730 Total Weight: 7500 Payload: 1695 Width: 255 Length: 848 Euro: 5 Model: midlum

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Ijdpfx Aex Hv T Tjf Ssbf Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side

Condition: ready for operation (used), Decoiling and rollforming line for manufacturing roof sandwich panels Max width of finished panel: 1000 mm PRODUCTION SPEED 7,30 meter per minute UP Floor 1 - Stam decoiler of 12 ton 2 - Memco embosser 3 - In-line profiling machine 4 - Sheet preheating DOWN Floor 1 - Stam decoiler of 12 ton 2 - Roll forming machine 3 - Sawing machine 4 - Pick and place for the insertion of sheets in the Stam production line, max panel length 18 meter 5 - Automatic machine for the overlapping of sheets 6 - Glue device 7 - Sheet preheating room Ibsdpfsx Imndjx Af Sjf 8 - PIR foaming gantry 9 - PIR dosing bench 10 - Siempelkamp 25 meter belt press 11 - Panels Cutting Machine (Flying Saw) 12 - Stacking unit for max panellength 16 meter 13 - Horizontal packing unit Total length of the line from decoiler to stacking is 90 meters. The packing unit is located next to the stacking unit, panels are moved from the stacking unit with side conveyors.

Condition: used, mileage: 227,000 km, Year of construction: 2016, Serial number: ZCFA775F80265xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21673 Specifications: EU-approved until 01.11.2025 2016 model Approx. 227,000 km Automatic Tires (see photos) 1,500 kg Zepro tail lift Side door Norka box body 3 seats Euro 6 Length: 810 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 4,940 kg 4x2 207 hp Internal length: approx. 613 cm Internal height: approx. 235 cm Reverse camera Radio/CD Air conditioning (A/C) Description:Iveco 75-210 two-axle box truck from 2016.New brake discs, clutch parts, and a front mirror were replaced during the service. last year.Equipped with a Norka box body and a 1,500 kg Zepro lift.Can be delivered on short notice.See video for more details. Km: 227000 HK: 207 Technical approved: no EU-approved until: 01.11.2025 Own weight: 4940 Total Weight: 7500 Payload: 2485 Ibedjxq U T Dopfx Af Sof Width: 255 Length: 810 Euro: 6 Model: 2016 Iveco 75-210 4x2 skapbil m/ lift Gearbox: Automatic

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximately 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Specifications: Capacity: 1,585 gal Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Isdpfx Ajx Hv R Ssf Sebf Straight Side: 1680

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 33 kW (44.87 HP), empty load weight: 20,000 kg, workpiece length (max.): 3,100 mm, throat depth: 150 mm, fully automatic shear, heavy duty shear for cutting high alloy steel, stainless steel with no torsion touchscreen CNC control: Ijdpfx Ajx Imnkof Ssbf - cnc controlled backgauge - cnc controlled blade gap - cnc controlled cutting angle foldable backgauge TOP Belgian quality shear Strokes/min: 9 > 30 str/min Adjustable cutting device: 0,05 > 1,3 Adjustable cuttingedge: 0,2 > 2,5° Number of sheet holders: 16x

Condition: used, machine/vehicle number: WMA18SZZ8DW18xxxx, mileage: 311,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21034 Specifications: EU-approved until 14.11.2026 Mileage: approx. 311,000 km Transmission: Automatic Engine brake Iodpfx Afow Hwh Sj Sobf Suspension: Steel front, air rear Euro 5, 400 hp Good tires Full side opening 20-pallet box body FOKOR body Zepro tail lift, 2,000 kg Internal length: approx. 8.55 m Internal width: approx. 2.49 m Internal height: approx. 2.42 m 3 seats Air horns 6x2 Radio/CD Reversing camera Climate control / AC Services performed at a local workshop Video available Ready for delivery Description: MAN TGS box truck from 2013.The truck is equipped with a 20-pallet box body and On Spot. Km: 311000 HK: 399 Technical approved: Yes EU-approved until: 14.11.2026 Own weight: 11760 Total Weight: 27000 Payload: 15165 Width: 255 Length: 1055 Euro: 5 Model: TGS 26.400 6x2 Skapbil m/ Full sideåpning. SE VIDEO Gearbox: Automatic

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Specifications: Ibjdpfex Hv R Ejx Af Ssf Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: used, machine/vehicle number: ZCFA875F50269xxxx, mileage: 113,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21794 Specifications:• Km: 113,000• Gearbox: Automatic• Engine brake• Euro 6, 207 hp• Good tires• Norka box body• Side door• Internal length: Approx. 6 meters• Internal width: Approx. 2.47 m• Internal height: Approx. 2.34 m• 4x2• Zepro tail lift, 1500 kg• Remote control• 3 seats• Reversing camera• Radio/CD• Climate control/AC• Services performed• Video• Ready for delivery Ibsdpjxwkfcsfx Af Sof Description:Iveco 75E-210 box truck from 2020.The truck has only 113,000 km.EU-approved and ready for delivery.Some cosmetic damage, see photos. Km: 113000 HK: 207 Technical approved: Yes EU-approved until: 28.03.2026 Own weight: 4980 Total Weight: 7500 Payload: 2445 Width: 255 Length: 790 Euro: 6 Model: 75E-210 Skapbil. 113 000 km! Gearbox: Automatic