Used International 1246 for sale (9,394)

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Belq Ajwc Shfekiqowl Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Bslq Akswc T Aqjiqowl Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Year of construction: 2021, Condition: excellent (used), Functionality: fully functional, bale weight: 273 kg, machine/vehicle number: X0721-016, GPS GREAT SCRAP PROCESSING SOLUTIONS BALER Fully automatic two compression baler for production of high-density bales. This baler will produce a very high-density bale and is suited for both ferrous and non-ferrous scrap. Bwslewc U Axeq Akiqjl 2021 G.P.S. Great Scrap Processing Solutions Model: 80 2C XL Automatic Baler, 400-480V, 3-PH, Total Install Power: 110 kW, Working Pressure: 280 Bar, First Compression Cylinder (Thrust): 140 t, Side Cylinder (Thrust): 140 t, Machine Noise Level:

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Bwelq Akierualpjqjl Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, Year of construction: 2005, operating hours: 11,190 h, Field of application: Internal logistics Please contact ATS Norway AS for more information Please provide reference number upon request: 19667 Specifications: Model year: 2005 Hours: 11,190 Engine power: 62 kW Weight: 7,500 kg Bwslq Aevyfhhokiqjl Lifting height: 5.5 m Tires: See pictures for details Rotor lamp Pallet forks Ready for delivery Description: Toyota Forklift from 2005, with an impressive lift height of 5.5 metres. The truck has 11,190 hours and is equipped with a rotary lamp and pallet forks. It can be delivered fully certified and ready for delivery. Hours: 11190 Total Weight: 7500 Kw: 62

Year of construction: 2008, Condition: excellent (used), Drying Oven Cefla Typ:Aquadry LA/6 TT 10000 Serie no:10063/04 Serie no:10063/05 Year:2010 Aquadry LA is the best in-line system for drying water-based paints Description This combined in-line system associates the effectiveness of high speed hot air and high radiation capacity IR lamps. It is the most efficient system for drying water-based paints, because it cuts the times needed to evaporate any water contained in the finishes. The hot air ventilation creates a high flow-rate area. The optional infrared lamps can have differential wavelengths and penetration depths. Features flexible choice of hold times thanks to oven's modularity; short flash-off or total drying times; user-friendly operation and low maintenance; low initial investment costs; no emissions and/or radiation in the working environment. Application Fields -Panels -Flat panerls - Raised or curved panels -Internal matchboard -Flat doors - Raised doors - Indoor furniture -Corrugated roof panels and sheets -Furniture components - Packaging -Interior components Materials - Fiber cement and composite -Metal - Plastic - Wood and wood-based materials Inlet fans capacity 12000m3/h Inlet fans power 11kw Exhaust fans capacity 5000m3/h Exhaust fans power 1,5kw Heating units output 135,000 Cal/tim NIR lamps power 4,2/8,5 kw IRM lamps power 1,2/2,5/3,5 kw IRCK lamps power 3/6kw TL lamps power 40/140 w Maximum sound level 74,5db Compressed air 4-5 bar Length 10500 + 10500mm Width Hight Bwelsiwuq Hsq Akiqel Weight 1700+1700 Kg Stock no:2001395BXAHED NOTE: The above specifications may vary depending on the machine version

Condition: new, Functionality: fully functional, machine/vehicle number: 6SE01001AC237AA7, overall weight: 30 kg, total length: 800 mm, total width: 400 mm, total height: 450 mm, protection type (IP code): IP20, Frequenty converter / AC Drive Sinamics G180 6SE01001AC237AA7-Z Year 2015 Belqowhbtue Akiqewl Nw/unused

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Belq Aswhdhzokiqewl Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000

Condition: used, Year of construction: 2015, machine/vehicle number: 25600, rotational speed (min.): 30 rpm, grinding wheel speed: 17,000 rpm, grinding wheel diameter: 300 mm, overall weight: 29,000 kg, grinding wheel width: 60 mm, table diameter: 930 mm, Equipped with: Siemens Sinumerik 840D Control Extended 1500 mm Gear Diameter Extended Working Stroke (Y Axis) 1500 mm CNC Dresser Prepped for Internal Grinding BfG Best-Fit Grinding Software High Speed Grinding Steady Rest Onboard Inspection (Profile, Lead, Spacing) Upgraded Inspection for Scanning/Digital Measurement Hydraulic Clamping System Profile & Lead Modifications Double-Helical Grinding Grind from Solid Root Grinding Hydraulic Unit Lubrication System Chiller Specifications: Operating Range: Bwjlsvggwwsq Akiqjl -Maximum Gear Outside Diameter: 1,500 mm -Maximum Stroke Length: 1,500 mm -Maximum Stroke Length of Tailstock: 1,500 mm -Minimum/Maximum Center Distance Above Table: 500 - 2,000 mm -Minimum Module: 0.5 -Maximum Pivoting Angle: -45 / +120 Degrees -Maximum Grinding Spindle Drive Power: 38.5 kW -Maximum Grinding Wheel Outside Diameter: 300 mm -Maximum Grinding Wheel Width: 60 -Maximum Stroke Speed: 12,000 mm/min -Minimum/Maximum Workpiece Table Speed: 0 - 30 RPM -Maximum Workpiece Table Load: 8,000 kg -Workpiece Table Diameter: 930 mm -Total Weight, Approximate: 29,000 kg -Space Requirement (width x depth x height): 5,2 x 6,9 x 3.6 m

Condition: used, Year of construction: 2014, Serial number: WKESD0000059xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 16102 Bwolq Akovg Nvvjiqjl Specifications: - 2014 model - Air suspension - Carrier unit - Tires (see pictures) - Length: 1404cm - Internal length: approx. 13.4m - Width: 260cm - Internal width: approx. 2.5m - Internal height: approx. 2.7m - Wheelbase: 131cm/131cm - Net weight: 8932kg - Max payload: 34,568kg - 3x 9-tonne axles - Ready for delivery Description: 2014 KRONE thermal trailer. 3x 9-ton axles. Brakes overhauled in 2022. Ready for delivery. Technical approved: Yes EU-approved until: 30.11.2025 Own weight: 8932 Total Weight: 43500 Payload: 34568 Width: 260 Length: 1404

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Bwslsq Ehpasq Akiqsl Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System Bjlqsrtrvye Akiqjwl HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Year of construction: 2016, Field of application: Freight transport Serial number: SCKD00000G0699381 Please contact ATS Norway AS for more information Please provide reference number upon request: 15198 Specifications: - 2016 model - 2 axle - Good tires - Hint - Remote control - New battery - Drivingbridges Bwslq Akjvg Av Ajiqol - Inside length: Approx. 360 cm - Internal width: Approx. 186 cm - Spare tire - Brake - Ready for delivery Description: IFOR Williams tipper trailer. It comes with bridges and remote control for tipping. Ready for delivery. Own weight: 990 Total Weight: 3500 Payload: 2510 Width: 205,3 Length: 496,5

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Bolq Asq H Spvjkiqowl Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min Bwolqjrtryye Akiqel

Condition: used, mileage: 900,000 km, Year of construction: 2009, Field of application: Freight transport Serial number: YS2R6X2000204xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19652 Truck specifications: - 2009 model - Km: Approx. 900.000 - Euro 4 engine - 500 HP - Automatic transmission - Retarder - 6x2 - Tires (see pictures) - Climate - Light - Radio - Delivery by agreement Specifications hinge: - 1990 model - 4 axles - Lift on 1 and 2 axles - Swing on 3rd and 4th axle - Internal length of stage 1: 4,464 m - Internal length of stage 2: 8,709 m - Total internal length: 13,230 m - Manual widening - Tires (see pictures) - Hydraulic driving bridges - Delivery by agreement Description: Scania R500 truck with 4 axles damm machine semi-trailer Both the truck and trailer are EU approved. Should be seen. Delivery by agreement. Km: 900000 HK: 500 Technical approved: Yes EU-approved until: 16.04.2025 Bolq Akovyd T Njiqjwl Own weight: 9860 Total Weight: 27000 Payload: 17065 Width: 255 Length: 720 Euro: 4 Gearbox: Automatic

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Bwolq Aksrtrzdjiqsl Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, mileage: 780,000 km, Year of construction: 2010, Serial number: YV2J1D1A8AA69xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18367 Specifications: - 2010 model - Km: approx. 780,000 - Gear: ishift - Tires (see pictures) - Inside length: approx. 760 cm - Internal width: approx. 245 cm - Internal height: approx. 270 cm - Two sets of tires - Full side opening - 2000 kg Zepro lift - Euro 5 - Length: 1,030 cm - Width: 255 cm - Wheelbase: 560 cm - Net weight: 10,150 kg - 4x2 - 337 hp - Tool box - Extra lights - Damage to mirror, see pictures - Rust, shown in pictures - Bed - Radio/cd - Climate/ac Description: 2010 Volvo FM 330 cabinet truck with full side opening and lift. The truck comes with two sets of tires. Bsljvgx U Usq Akiqowl It has recently had a 2-year check on the printer. Can be delivered within a short time. Km: 780000 HK: 337 Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 10150 Total Weight: 10225 Payload: 9275 Width: 255 Length: 1030 Euro: 5

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Bwsljrtrxioq Akiqsl Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Year of construction: 2002, Field of application: Internal logistics Serial number: 3FD35-1xxxx Please contact ATS Norway AS for more information Bwslq Aksvyftqoiqel Please provide reference number upon request: 19534 Specifications: - 2002 model - Services taken by owner - Lifting height of 5200 mm - Weight 5740 kg - Lifting capacity of 2600 kg - Diesel - 120 cm forks - Ready for delivery Description: Toyota truck with lifting capacity of 2600 kg Lifting height is 5200 mm. A little engine oil is dripping from the engine. Otherwise, it functions as it should, according to the owner. Video included. Delivery by appointment Total Weight: 5740

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater - Light - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane Bolq Akisvg At Ueqswl - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: used, mileage: 332,670 km, Year of construction: 2015, Serial number: VF6MFF5VR5352xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17322 Specifications: - 2015 model - 332,670 km - Eu approved to 08.11.2025 - Euro 5 - 150 Hp - 2 seats - Automatic transmission - Cruise control - Rear view camera - Internal width: 1,741 m - Internal length: 3,602 m - Internal height: 1,867 m - 1970 kg Net weight - Service history - Climate/ac - Light - Radio - Video - Delivery by agreement Description: All services taken at brand dealer. Everything works says the owner. Delivery by agreement Km: 332670 HK: 149 Bwolq Akevg R Dnsiqel Technical approved: Yes EU-approved until: 08.11.2025 Own weight: 1970 Total Weight: 3500 Payload: 1455 Width: 207 Length: 619,8 Inside width: 1741 Inside lenght: 3602 Inside hight: 1867 Kw: 110 Euro: 5 Gearbox: Automatic

Condition: used, Year of construction: 2013, Serial number: WSJTKS324DTJ2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19134 Specifications: - 3 axle - Lift on 1 - Suspension: Air - 33 pallets - Inside length: Approx. 13.3 m Bwslqevgz Ane Akiqsl - Internal width: Approx. 2.5 m - Internal height: Approx. 2.85 m - Carrier cooling/freezer unit - Good tires Description: Krone Cool Liner with cooling/freezer unit. Good tires and 33 pallets. Ready for delivery. Technical approved: no EU-approved until: 20.06.2024 Own weight: 9550 Total Weight: 45000 Payload: 35450 Width: 260 Length: 1379

Condition: used, mileage: 180,000 km, Year of construction: 2021, Serial number: W1T9630201051xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17610 Specifications: - 2021 model - Km: approx. 180,000 (will ke) - Suspension: Air - Automatic - Tires (see pictures) - Retarder - Carrier cooling/freezer unit - Zepro lift - Side door - Inside length: approx. 825 cm - Internal height: approx. 250 cm Bwolovgy Ensq Akiqsl - Net weight: 13,320 kg - Euro 6 - Reversing camera - Extra lights - Compressor horn - Tool box - Radio/cd - Climate/ac - Service history Description: 2021 Mercedes Actros 4x2 box truck. Tarfurgo cabinet with Carrier fridge/freezer unit. The truxk has a service agreement and is ready to be put into operation. Delivery by agreement. Km: 180000 HK: 428 Technical approved: Yes EU-approved until: 06.08.2025 Own weight: 13320 Total Weight: 27000 Payload: 13605 Width: 260 Length: 1086,5 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2022, Serial number: WKVDAF3030011xxxx Please contact ATS Norway AS for more information Bwjlevyfhnsq Akiqol Please provide reference number upon request: 19622 Specifications: - 2022 model - Air suspension - Tires (see pictures) - Lift on row 1. - Turn on 3. - Liftable roof - Internal length: approx. 1,367 cm - Internal height: approx. 278 cm - Wheelbase: 131/181 cm - Weight: 7,880 kg - Tool cabinet Description: 2022 Kaessbohrer Curtainsider with liftable roof. It is lift on 1st and turn on 3rd. It is ready to be put into operation. Can be delivered within a short time. Technical approved: Yes EU-approved until: 20.04.2026 Own weight: 7880 Total Weight: 45000 Payload: 37120 Width: 255 Length: 1385