Used International 824 for sale (9,583)

Condition: ready for operation (used), Auto controlled powdercoat station: - movable on rails - with own recuperation- filter installation - with 2 robots - each robot has 3 pistols Cjb Howhrz Non Humsrb Entry dimensions of tunnel: 1000 width x 1800 height PulverKabine: 10/17/70 15 000 m3/h capacity Serie Number: 41-295-003 700 g/min spraying

Condition: used, Year of construction: 2016, Field of application: Freight transport Serial number: SCKD00000G0699381 Please contact ATS Norway AS for more information Please provide reference number upon request: 15198 Specifications: - 2016 model - 2 axle - Good tires - Hint - Remote control - New battery Crjb Hnsvg Av As Humsb - Drivingbridges - Inside length: Approx. 360 cm - Internal width: Approx. 186 cm - Spare tire - Brake - Ready for delivery Description: IFOR Williams tipper trailer. It comes with bridges and remote control for tipping. Ready for delivery. Own weight: 990 Total Weight: 3500 Payload: 2510 Width: 205,3 Length: 496,5

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 Tools Number of index 38 Type of tool holder HSK-A 63 Additional Equipment Cooling: Internal cooling 40-80 bar Crob Hn Hewhgrpjumeb This 5-axis Hermle C 40 U was manufactured in 2009. A universal machining centre designed for precision and versatility in complex machining tasks. Ideal for those seeking advanced milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: used, Heraeus Vötsch Type: VT 7010 Air-Cooled Temperature Test Chamber 100 Liter Test Chamber Volume Housing Dimensions: Width 820 mm, Depth 840 mm, Height 1670 mm Internal Dimensions: Width 550 mm, Depth 350 mm, Height 550 mm Temperature Range -70°C to +180°C Temperature Deviation Temporarily ± 1 K Temperature Deviation Spatially ± 2 K Side Feedthrough 80 mm ∅ 80 mm ∅ Refrigerant: R-404A / R-23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power 3.2 kW Rated Current 14.5 A Weight: 260 kg For your safety, please note the following information as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Crob Hewhmdrsn Humeb Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2016, operating hours: 19,765 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, tool mount: 60 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, rotational speed (max.): 10,000 rpm, workpiece weight (max.): 4,000 kg, total height: 3,162 mm, total length: 8,575 mm, total width: 5,730 mm, bar diameter: 160 mm, overall weight: 26,800 kg, tool length: 500 mm, CNC controller: Siemens 840D solutionline CELOS, ERGOline Axes X-axis travel mm: 2.600 Y-axis travel mm: 1.100 Z-axis travel mm: 900 C-axis degrees: C-axis direct drive B-axis degrees: swivel head (B-axis) Feed rates m/min: 80 / 60 / 60 Rapid traverse m/min: 80 / 60 / 60 Acceleration in the axes m/s2: 5 / 6 / 6 Worktable Number of pallets: 1 integrated with rotary pallet Table dimensions mm: 2.600 x 1.100 Max. workpiece weight kg: 4.000 Spindle Spindle speed rpm: 10.000 Milling/turning table nc Number of pallets: 1 left side Table dimensions mm: Ø1.050 Maximum workpiece size (D x H) mm: 1.100 x 930 x 3.200 Max. workpiece weight kg: 2.000 Table rotation speed rpm: 725 Drive power kW: 44 / 32 kW (40/100% ED) Tool system Creb Hnowhk E Ts Humob Tool holder: HSK-A100 Tool magazine slots: 60 Tool changer: Chain - Double gripper Max. Tool Diameter: 160 With occupied neighboring places mm: 115 Max. Tool Length mm: 500 Max tool weight kg: 12 Chip-to-chip time s: 7,5 Equipment Chip conveyor Swivel head Blowing air through spindle center selectable via M-function Signal lamp Mist collector 3D quickSET Coolant gun Oil skimmer Dynamic package (linear drive X/Y/Z axis) Ready for internal cooling (40/80 bar) OPTICAL TYPE PROBE SENSOR (RENISHAW) PROVIDED Blum laser NT Hybrid Internal cooling supply 40 BAR Rotating viewing window with laminated glass Package Mill / Turn Separation wall for 2 working spaces Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 L Machine running times Under power: 61.760 Operating Time: 19.765 Basic machine dimensions / weight Length mm: 8.575 Width mm: 5.730 Height mm: 3.162 Weight kg: 26.800

Condition: new, The special construction of the Multi Grind makes it possible to combine the functions of cylindrical, flat and tool grinding in one machine. With external cylindrical grinding, the workpiece is either clamped on one side or supported between centers in the stable tailstock. An internal grinding device can also be attached to the headstock and light surface grinding work is also possible with this model. With the additional tool grinding function area, you can use the Multi Grind to machine the cutting edges of a large number of tools. Cjb Hn Houyid Reumorb

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom Crob Hnswhr Ago Humjb

Condition: used, Year of construction: 2019, operating hours: 1,000 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 18245 Spesifikasjoner - 2019 modell - Ca 1000 timer - 90 kW - Mate kasse - Åpning 1000 mm x650 mm - Spalteåpning: 130 mm – 50 mm - 2019 Strømaggregat 250 kva og 30 m kabel - Kjeft knuser - Båndbredde: 900 mm - Mobilt verk - Levering etter avtale Beskrivelse: Cjb Hsvgyxnsn Humjrb 2019 omega 1065M mobilt knuseverk. Det følger med 2019 strømaggregat og 30 meter kabel. Verket kan leveres etter avtale. Hours: 1000 Kw: 90

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 Tools Csb Hjwhgrvjn Humjrb Number of index 38 Type of tool holder HSK-A 63 Additional Equipment Cooling: Internal cooling 40-80 bar This 5-axis Hermle C 40 U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 40 U machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2008, Condition: excellent (used), Drying Oven Cefla Typ:Aquadry LA/6 TT 10000 Serie no:10063/04 Serie no:10063/05 Year:2010 Aquadry LA is the best in-line system for drying water-based paints Description This combined in-line system associates the effectiveness of high speed hot air and high radiation capacity IR lamps. It is the most efficient system for drying water-based paints, because it cuts the times needed to evaporate any water contained in the finishes. The hot air ventilation creates a high flow-rate area. The optional infrared lamps can have differential wavelengths and penetration depths. Features flexible choice of hold times thanks to oven's modularity; short flash-off or total drying times; user-friendly operation and low maintenance; low initial investment costs; no emissions and/or radiation in the working environment. Application Fields -Panels -Flat panerls - Raised or curved panels -Internal matchboard -Flat doors - Raised doors - Indoor furniture -Corrugated roof panels and sheets -Furniture components - Packaging -Interior components Materials - Fiber cement and composite -Metal - Plastic - Wood and wood-based materials Inlet fans capacity 12000m3/h Inlet fans power 11kw Exhaust fans capacity 5000m3/h Exhaust fans power 1,5kw Heating units output 135,000 Cal/tim NIR lamps power 4,2/8,5 kw IRM lamps power 1,2/2,5/3,5 kw IRCK lamps power 3/6kw TL lamps power 40/140 w Maximum sound level 74,5db Compressed air 4-5 bar Length 10500 + 10500mm Width Cobjiwuq Ho Hn Humorb Hight Weight 1700+1700 Kg Stock no:2001395BXAHED NOTE: The above specifications may vary depending on the machine version

Condition: ready for operation (used), passage width: 4,200 mm, net weight: 40,000 kg, This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Has been fully reconditionned Cap: 600 Ton Max opening: 1600 mm stroke: 600 mm Crsb Howhr Dqsn Humsb Table: 2000 x 1000 mm Between coloms: 4200 mm Closing speed: 55 mm/sec working speed: 10 mm/sec return speed: 130 mm/sec plate roll press - plate roller press - Plattenroll Presse - strechting - bending - joggling - flanging - Kesselboden - Fond elliptique / Fonds elliptiques / Dish-end forming press / Tankbödenherstellung / Kümpelpressen / Bördelmaschinen / Bodenrand-Sickenmaschinen Capacity: 600 Ton Max ram adjustment: 600 mm Drawningspeed: 55 mm/sec Workingspeed: 5 à 10 mm/sec Returningspeed: 130 mm/sec Max distance between table - ram: 1600 mm Dimensions of the table: 2000 x 1000 mm Electric motor (power): 45 pk

Condition: used, mileage: 900,000 km, Year of construction: 2009, Field of application: Freight transport Serial number: YS2R6X2000204xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19652 Truck specifications: - 2009 model - Km: Approx. 900.000 - Euro 4 engine - 500 HP - Automatic transmission - Retarder - 6x2 - Tires (see pictures) - Climate - Light - Radio - Delivery by agreement Specifications hinge: - 1990 model - 4 axles - Lift on 1 and 2 axles - Swing on 3rd and 4th axle - Internal length of stage 1: 4,464 m - Internal length of stage 2: 8,709 m - Total internal length: 13,230 m - Manual widening - Tires (see pictures) - Hydraulic driving bridges - Delivery by agreement Creb Hn Hjvyd T Neumjb Description: Scania R500 truck with 4 axles damm machine semi-trailer Both the truck and trailer are EU approved. Should be seen. Delivery by agreement. Km: 900000 HK: 500 Technical approved: Yes EU-approved until: 16.04.2025 Own weight: 9860 Total Weight: 27000 Payload: 17065 Width: 255 Length: 720 Euro: 4 Gearbox: Automatic

Condition: ready for operation (used), total height: 4,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), load capacity: 400,000 kg, net weight: 85,000 kg, total depth: 5,900 mm, Gantry straightening press400 ton For straightening shafts, steels castings, rolled products, open-die forgings, flat steel but also pressing in/out bearings, bushes, shrink rings,... 14 individual counter pressure cylinders in the table - 3 ton cap per cilinder - 100 mm stroke per cilinder - 300 kg/cm² Ceb Hn Hjwhrwkoumjrb Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: used, mileage: 780,000 km, Year of construction: 2010, Serial number: YV2J1D1A8AA69xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18367 Specifications: - 2010 model - Km: approx. 780,000 - Gear: ishift - Tires (see pictures) - Inside length: approx. 760 cm - Internal width: approx. 245 cm - Internal height: approx. 270 cm - Two sets of tires - Full side opening - 2000 kg Zepro lift - Euro 5 - Length: 1,030 cm - Width: 255 cm - Wheelbase: 560 cm - Net weight: 10,150 kg - 4x2 - 337 hp - Tool box - Extra lights - Damage to mirror, see pictures - Rust, shown in pictures - Bed - Radio/cd - Climate/ac Description: 2010 Volvo FM 330 cabinet truck with full side opening and lift. The truck comes with two sets of tires. It has recently had a 2-year check on the printer. Crsbjvgx U Ue Hn Humsb Can be delivered within a short time. Km: 780000 HK: 337 Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 10150 Total Weight: 10225 Payload: 9275 Width: 255 Length: 1030 Euro: 5

Condition: ready for operation (used), total length: 7,600 mm, total height: 3,000 mm, nominal power: 40.231 kW (54.70 HP), total depth: 2,900 mm, Hydraulic machine - extra upperroll of dia 300 mm included (weight: 8 ton) - hardened rolls - 2 syncrhonized driven rolls (upper and lower roll) with upperroll of 420 mm the smallest rollable diameter is 460 mm cap: 4180 x 20 mm / 3100 x 30 mm with upperroll of 300 mm the smallest rollable diameter is 330 mm cap: 4180 x 10 mm / 3100 x 20 mm conical bending Number of rolls: 4x Roll capacity cold: 4180 x 20 mm Roll dia upside: 420 mm Dia under roll - side rolls: 330 mm Crsb Hn Howhrxueumob Weight: 36+7 ton

Condition: used, Year of construction: 2002, Field of application: Internal logistics Serial number: 3FD35-1xxxx Crjbjvyftqe Hn Humeb Please contact ATS Norway AS for more information Please provide reference number upon request: 19534 Specifications: - 2002 model - Services taken by owner - Lifting height of 5200 mm - Weight 5740 kg - Lifting capacity of 2600 kg - Diesel - 120 cm forks - Ready for delivery Description: Toyota truck with lifting capacity of 2600 kg Lifting height is 5200 mm. A little engine oil is dripping from the engine. Otherwise, it functions as it should, according to the owner. Video included. Delivery by appointment Total Weight: 5740

Condition: ready for operation (used), Two station rotary positioner - Type Rot. II Komp 1) Romat 410 robot - working range: 4020 mm Crebowhrzij Hn Humsb - height: 2897 mm - load cap: 10kg 2) Double 360° turnable pallet table 3) welding source GLC 553 MC3 R mig welding - output duty cycle 100%: 500A

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater - Light Cobjvg At Uo Hn Humsrb - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: ready for operation (used), total height: 3,300 mm, total length: 5,200 mm, throat depth: 430 mm, operating speed: 10 mm/s, table width: 154 mm, retraction speed: 100 mm/s, travel distance Z-axis: 365 mm, controller manufacturer: Delem DA66W, power: 37 kW (50.31 HP), net weight: 21,000 kg, opening height: 630 mm, passage width: 3,600 mm, total depth: 2,750 mm, Y1/Y2/X/R/V CNC bombation servocontrolled laser security tools included tooling: Csb Hn Huowhrz Ajmorb bending die V130 - 4100 mm length bending die V160 - 5 pieces 415 mm Capacity: 320 ton x 4050 mm Backgauge: CNC Locking speed: 100 mm/sec

Condition: used, mileage: 332,670 km, Year of construction: 2015, Serial number: VF6MFF5VR5352xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17322 Specifications: - 2015 model - 332,670 km - Eu approved to 08.11.2025 - Euro 5 Csbevg R Dnj Hn Humerb - 150 Hp - 2 seats - Automatic transmission - Cruise control - Rear view camera - Internal width: 1,741 m - Internal length: 3,602 m - Internal height: 1,867 m - 1970 kg Net weight - Service history - Climate/ac - Light - Radio - Video - Delivery by agreement Description: All services taken at brand dealer. Everything works says the owner. Delivery by agreement Km: 332670 HK: 149 Technical approved: Yes EU-approved until: 08.11.2025 Own weight: 1970 Total Weight: 3500 Payload: 1455 Width: 207 Length: 619,8 Inside width: 1741 Inside lenght: 3602 Inside hight: 1867 Kw: 110 Euro: 5 Gearbox: Automatic

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, total length: 11,055 mm, total height: 4,140 mm, net weight: 45,000 kg, total depth: 6,320 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Cob Hn Husv Sfmusmorb Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Crsb Hn Huov Sfn Ejmeb Max speedrange: 6 > 2000 rpm

Condition: ready for operation (used), Drukbuigmachine voor het buigen van buizen met en zonder doorn Buigen onder druk maakt het mogelijk om zeer kleine buigradiussen te produceren (minimale radius 1 x D). Hierdoor kunnen bijvoorbeeld ketelinstallaties met een hoger vermogen in kleinere afmetingen worden geproduceerd. Drukbuigen maakt ook het gebruik van zeer lange buizen mogelijk, omdat er geen doorn nodig is. De buislengtes kunnen achter de machine aan elkaar worden gelast en tot afgewerkte systemen worden gebogen, waardoor er geen paswerk nodig is. Bovendien garandeert drukbuigen de naleving van de voorgeschreven wanddiktetoleranties in de buisbochten volgens VGB. Vergeleken met conventioneel buigen met een doorn is de afname van de wanddikte aan de buitenzijde van de buis bij drukbuigen zonder doorn zeer gering. Bij gebruik van een buigdoorn maakt drukbuigen het mogelijk om bochten te maken uit dunwandige holle legeringsbuizen met zeer kleine buigradiussen (1 x D), omdat door drukbuigen de buitenwand van de bocht wordt ontlast Er zijn veel hulpmiddelen inbegrepen Drukbuigen of drukbuigen doornvrij koudbuigen Max dia tube x thickness: Ø 89 x 5 mm Csb Hsv Sfiven Humsrb Max bendingradius: 180° Back stop max tubelength: 6000 mm Bending die: yes

Condition: ready for operation (used), travel distance X-axis: 9,000 mm, Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruisende Y-beweging van de kolom: 650 mm Verticale Z-beweging van de freeskop: 3000 mm Horizontale W-beweging van de freeskop: 1200 mm Machine kan met 6 assen tegelijk werken 2 hydrostatische tafels CNC gestuurd - Gewicht op de tafel: 30 ton - Continue 360° - Dwarsverplaatsing van de tafel: 2500 mm Gereedschapswisselaar met 60 posities Freeskopsteun / support de renforcement de la broche Boorspindelsteun / ondersteuningsportfolio#39;s Cross traverse Y-axis (table/column): 650 mm (column) Cob Hn Hjv Sfm Ujumorb Vertical traverse Z-axis: 3000 mm Spindle traverse W-axis: 1200 mm Milling spindle taper (ISO): ISO 50 Dia spindle -- Spindle bore: 160 mm Digital read-out (1) CNC(2): Heidenhain TNC 530 Rotary table dimensions: 2 tables 2380 x 2380 mm Max weight on table: 2 tables x 30 ton

Condition: ready for operation (used), total height: 2,950 mm, total length: 11,400 mm, net weight: 4,900 kg, total depth: 3,350 mm, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Crsbjv Tamro Hn Humjb Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 650 mm Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm