Used International 624 for sale (9,099)

Condition: excellent (used), Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars Ksdpsx Ddcujfx Af Sonf with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Kjdpsxdn Nrsfx Af Senf Asking price: €154,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS Kodpexmthrefx Af Ssnf DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and Ksdpjv Ehbbefx Af Senf other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm Ksdpfew Iquyox Af Sonf -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine Knjdpfjwphixox Af Sef - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) Knsdpfx Afexnrtco Ssf 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Specifications: Capacity: 361.9 gal Diameter: 3.94' Knodpex Hwb Eofx Af Sof Height: 2.53' Type Of Heads: welded dished top and welded cone bottom Vertical/Horizontal: vertical Type of stainless: 316L Legs/Lugs: 4

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Kjdexpymaopfx Af Senf

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t Kedpfowwar Iex Af Ssnf dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw Knsdpsrualpjfx Af Ssf A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, machine/vehicle number: YS2S6X2000215xxxx, mileage: 695,038 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 22092 Car specifications: 2018 model Mileage: 695,038 (will check a little) EU approved until: 30.11.26 Euro 6 6x2 650 hp Tires (see pictures) Automatic transmission L ft on 3 axles Full side opening opening on car: 2.94 cm Internal length in cabinet: 6.886 m Internal width in cabinet: 2.496 m Internal height in cabinet: 2,900 m Heating in cabinets 3 rows of lashing rails Brake pads: see picture Clutch plate: 100% Retarder Spring: full air Refrigerator Webasto new Particle filter changed Brake pads on drive shaft changed Clutch replaced 70,000 km ago Air conditioning/ac Radio Light Videos Delivery by appointment   Specifications cabinet beds: 2018 model EU approved until: 10.11.26 4 axles Tires (see pictures) hanger opening: 2.94 cm 3 rows of lashing rails Heating in cupboard (unknown condition) Full side opening Delivery by appointment   Knodpfjx Ncb Aox Af Ssf Description: We have a 2018 Scania S650 6x2 box truck w/ 2018 spoke 4 axle box trailer w/ full side opening for sale. The car is being sold as a set and everything works as it should according to the owner. What needs to be done is the heating in the cupboard. This has not been used by the owner and is in an unknown condition. So errors and omissions may occur and some cost must be taken into account. The car is in weekly operation so the mileage will increase slightly. Delivery by appointment Km: 695038 HK: 649 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 13500 Euro: 6 Model: S650 6x2 skapbil m/ 2018 ekeri 4 akslet skaphenger m/ full sideåpning se video Gearbox: Automatic

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Knodpfx Afjx Hwbxs Sef Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Kedpfertrzdsx Af Sjnf Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Euro 5 Wheelbase: 490/135 cm 6x2 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Knodpfx Afjx Ip A De Sjf Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Gearbox: Automatic

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Power: 11 kW Knjdpox Hv U Rofx Af Sjf

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Kjdpfx Afjrtrvyo Sonf Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, machine/vehicle number: W09SCUH3NDEN1xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 20702 Specifications: - 2013 model - 3 axles - Lift on 1 axle - Repair item - Internal height: 2.693 m - Internal length: 13.610 m - Internal width: 2.491 m - Lashings - Manual sliding roof - Full side opening - Ready for delivery Description: We have a 2013 HRD 3 axles capitol trolley repair item w/ full side opening for sale. The trolley is sold as a repair item as it is not EU approved and some additional costs must be expected. Ready for delivery Technical approved: no EU-approved until: 01.04.2025 Own weight: 8340 Total Weight: 45000 Payload: 36660 Width: 255 Length: 1388 Model: 3 akslet kapelltralle ekt m/ full sideåpning Kedpfx Aewqwnmjf Sjnf

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Knjdjx Hv T Tspfx Af Sef Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Kjdpertryyjfx Af Sonf Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, machine/vehicle number: WDB9630201034xxxx, mileage: 269,220 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21642 Specifications: 2019 model 269,220 km (I want to know a little) Euro 6 engine 6x2 530 hp Automatic transmission Spring: full air Tires (see pictures) Refrigeration/freezing unit Zepro lift w/ remote control Longitudinal partition wall Objection length: 8,531 m Internal width: 2.493 m Internal height: 2,740 m P building: bus building Lift and swing on 3 axles Refrigerator Diesel heater Hang on. leather seats Air conditioning/ac Knsdpexq A T Ejfx Af Sef Light Radio Ready for delivery Description: We have a 2019 Mercedes-Benz Actrox 6x2 box truck w/ refrigerator/freezer unit for sale. The car is in weekly operation and the mileage will therefore increase slightly. All services and maintenance are carried out at the workshop. There is also a service agreement on the generator. The starter motor and brakes on axle 2 have been replaced. Everything works as it should, according to the owner. Ready for delivery Km: 269220 HK: 530 Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 14700 Euro: 6 Model: Actrox 6x2 skapbil m/ kjøl/frys aggregat Gearbox: Automatic

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximately 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Specifications: Knedpfjx Hv R Sox Af Sjf Capacity: 1,585 gal Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Straight Side: 1680

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Kjdpfx Ajrtrxisf Sonf Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, machine/vehicle number: YV2X9J0A0FA78xxxx, mileage: 371,740 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 20870 Specifications: - 2015 Model - 371,740 km - I-Shift - Euro 6 engine Knedpfjwv I Ihex Af Sjf - 340 hp - Tires (see pictures) - 4x2 - Suspension: full air - Zepro Lift - Remote control - Internal width: 2,368 m - Internal height: 2,620 m - Internal length: 7,659 m - Arka body - Full side opening - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2015 Volvo Fm 330 4x2 Box truck w/ full side opening for sale. The car works as it should according to the owner. All services have been done by the owner himself. The car is EU approved and can be put straight into production. Ready for delivery Km: 371740 HK: 340 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 10650 Total Weight: 21000 Payload: 10275 Width: 255 Length: 1011 Euro: 6 Model: FM 330 Gearbox: Automatic

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Specifications: Capacity: 2,641.7 gal Ksdpfx Asx Hv R Esf Sonf Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778