Used International 433 for sale (9,106)

Condition: used, machine/vehicle number: WDB9061551N51xxxx, mileage: 99,500 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 18275 Specifications: Model year: 2012 163 hp – 4 cylinders Approx. 103,000 km (may increase slightly) Euro 5 Manual transmission 4x2 drive Wheelbase: 433 cm Curb weight: 2460 kg Length: 676 cm Width: 210 cm Tires (see photos) HIAB crane Radio AC/climate control 3 seats Ramps included (see photos) Brand new winch included (see photos) Pedpfoxq Dg Hjx Af Serf HIAB crane included Delivery by agreement Description:2012 Mercedes Sprinter flatbed truck with only approx. 103,000 km.Includes loading ramps and a brand new, installed winch.Delivery by arrangement. Km: 99500 HK: 190 Technical approved: Yes EU-approved until: 01.09.2026 Own weight: 2460 Total Weight: 5000 Payload: 2465 Width: 210 Length: 676 Euro: 5 Gearbox: Manual

Condition: used, Used FIB Industriele Bedrijuen BV approximately 11,600 litre stainless steel vertical storage tank. Unit welded dished top and bottom heads. Unit measures approximately 2,100mm diameter x 2,640mm straight side. Internal rated atmospheric design pressure at 135 deg.c. Unit is mounted on legs. Specifications: Capacity: 3,062 gal Diameter: 6.89' Prodpfxox Nix Io Af Sjf Height: 8.66' Type Of Heads: welded dished Vertical/Horizontal: Vertical Type of stainless: stainless steel Legs/Lugs: Legs Dimensions: Diameter 6.88976 feet and height 8.661415 feet

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 05/2021, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2021, Equipment: full service history, power assisted steering, Technical specifications Mega VARIOS ROTOS SCB running gear (disc brakes) SCHMITZ sliding roof VARIOS 180mm depth 2480mm internal width, lifting rear header 7 x Row(s) alu support laths with connection profile Prodsxw Rklspfx Af Sef Superstructure 3x divided Without international custom seal (TIR) 7 tyres - 385/55R22.5 Length - 13.620 mm Width - 2.480 mm Height - 3.976 mm Plastic toolbox with cover holder, sleeves and drawer behind the unit

Condition: excellent (used), Year of construction: 2019, operating hours: 41 h, fuel type: electric, battery capacity: 120 Ah, Empty weight: 350 kg Lifting capacity: 1.000 kg Supply voltage: 230 V CE mark: yes Technical condition: very good Visual appearance: very good Transport dimensions (LxWxH): 1,1x0,7x0,42 Production country: UK Please contact Vink Machinery for more information Tracked Carriers Beaver 10.07 * 2019 * 41 working hours * Remote control * Battery-powered * Internal charger * Includes dolly 1.0 * Equipped with a turntable Psdpfexpu E Rsx Af Sjrf * 1000 kg lifting capacity * 350 kg net weight

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock Predpfjwy Ri Njx Af Sef with coolant tank *

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband Pjdpfx Afev Sfp Ae Sorf uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center Prodowphixepfx Af Ssf - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: used, Used Becomix model Beco Mini Lab homogenizing mixer.  Manufacturer: Becomix. Capacity: Working capacity maximum of 5 Litres approximately Dimensions: 820mm x 820mm x 1250mm high approximately Pressure: -1/+1 Bar maximum working pressure  internally; 4 Bar maximum working pressure of the external jacket Conical welded bottom with a clamped dish top. Pressure and vacuum sealed by a double acting axial seal rings and cooled by barrier water flow. Bottom entry homogenizer: Power 1.55kW Torque 2.5Nm Weight: Estimated: Kg250.0 Dimensions: 820mm X 820mm Prsdpfx Ajx Nixuof Sof

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Podpex N E H Uefx Af Ssrf Ultimotion software Tool change optimization software Please not vices are not with sale of machine

Condition: excellent (used), Year of construction: 2017, Universal Machining Center Machine type: DMG DMF 260 / 11 linear Control: CELOS Siemens 840D sl Year of manufacture: 2017 TECHNICAL SPECIFICATIONS: Travel distances: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic package for DMF 260 linear (Y1100) Rapid traverse (X/Y/Z) [m/min]: 80 / 60 / 60 Spindle speed range [rpm]: 20 - 15,000 Drive power [kW]: 46 / 30 Tool holder: SK 40 Automatic tool changer Tool stations: 60 NC rotary table Table size [mm]: 3,200 x 1,100 Max. table load [kg]: 1,200 Equipment features: Internal coolant supply (IKZ): [bar] 40 Coolant tank: [l] 600 Predjx Rbliepfx Af Sjf Chip conveyor Chip flushing gun Oil mist extraction Through-spindle air supply Spindle probe Prepared for use with 3D quickSet Automatic doors Electronic handwheel This offer is non-binding and subject to prior sale. Changes, errors, and intermediate sale expressly reserved.

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 600 mm grinding length: 3000 mm centre height: 315 mm workpiece weight max.: 3000 kg work piece spindle speed: 8 - 120 U/min grinding wheel motor: 25 kW grinding wheel speed: 45 m/sec grinding wheel width x diameter: 750 x 80 mm table speeds: 30 - 4500 mm/min feeds of grinding head: 0 - 5 mm/min table swivelabel +/-: 7,5 ° total power requirement: 55 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle Pedpfx Asvb Dl Usf Sjrf - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests *

Condition: excellent (used), Year of construction: 2003, DECKEL MAHO DMC 104 V SIEMENS 810 D Technical specifications: X-travel: 1040 mm Pedpjwm Aq Eefx Af Sorf Y-travel: 600 mm Z-travel: 500 mm Spindle speed: 12,000 rpm Spindle mount: SK 40 Tool magazine: 30 positions Clamping area: 1250 x 600 mm Max. table load: 800 kg Internal coolant supply 40 bar Accessories: Chip conveyor, spindle cooler, internal coolant supply, tool measurement, documentation

Condition: used, machine/vehicle number: YS2S6X2000215xxxx, mileage: 695,038 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 22092 Car specifications: 2018 model Mileage: 695,038 (will check a little) EU approved until: 30.11.26 Euro 6 Prsdox Ncb Aepfx Af Ssf 6x2 650 hp Tires (see pictures) Automatic transmission L ft on 3 axles Full side opening opening on car: 2.94 cm Internal length in cabinet: 6.886 m Internal width in cabinet: 2.496 m Internal height in cabinet: 2,900 m Heating in cabinets 3 rows of lashing rails Brake pads: see picture Clutch plate: 100% Retarder Spring: full air Refrigerator Webasto new Particle filter changed Brake pads on drive shaft changed Clutch replaced 70,000 km ago Air conditioning/ac Radio Light Videos Delivery by appointment   Specifications cabinet beds: 2018 model EU approved until: 10.11.26 4 axles Tires (see pictures) hanger opening: 2.94 cm 3 rows of lashing rails Heating in cupboard (unknown condition) Full side opening Delivery by appointment   Description: We have a 2018 Scania S650 6x2 box truck w/ 2018 spoke 4 axle box trailer w/ full side opening for sale. The car is being sold as a set and everything works as it should according to the owner. What needs to be done is the heating in the cupboard. This has not been used by the owner and is in an unknown condition. So errors and omissions may occur and some cost must be taken into account. The car is in weekly operation so the mileage will increase slightly. Delivery by appointment Km: 695038 HK: 649 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 13500 Euro: 6 Model: S650 6x2 skapbil m/ 2018 ekeri 4 akslet skaphenger m/ full sideåpning se video Gearbox: Automatic

Condition: used, Used FIB Industriele Bedrijuen BV approximately 3,900 litre stainless steel vertical storage tank. Unit has welded dished top and bottom heads. Internal rated atmospheric design pressure at 135 deg.c. Unit mounted on side supports. Specifications: Capacity: 1,030.3 gal Type Of Heads: welded dished Vertical/Horizontal: vertical Legs/Lugs: side supports Predpfx Asx Nixnof Sof

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm !! - hydraulic clamping on table - tool taper for turning: KM63 - 18 000 rpm - HSK 63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm Podpfx Asxtgkasf Serf - tool taper for milling: HSK-E40 - 150-position tool changer with 126 tool positions for milling, grinding, drilling List of options mounted on the machine: 1 - 40,000 rpm high-speed spindle 2 - table dia 700 mm with hydraulic clamping 3-150-position tool changer 4 - chip conveyor belt 5 - cooling system with recovery 6 - coolant temperature control 7 - high pressure cooling (40 to 70 bar) by spindle 8 - smoke extraction system 9 - chip collection box 10 - Presetting system and tool integrity: laser and mechanical probe for measuring tools 11 - Renishaw probe Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: used, machine/vehicle number: W1T9630091068xxxx, mileage: 70,000 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 21546 Specifications: Km: Approx. 70,000 (may increase) Transmission: Automatic Engine brake Euro 6, 326 hp Full air suspension 4x2 Good tires Ekeri box 18 pallets External height: Approx. 3.95 m Full side opening 2-ton Zepro tail lift Remote control Rear view camera Internal length: Approx. 7.6 m Radio/CD Climate control/AC Last service done summer 2025 Service history Delivery by agreement Description:Well-maintained Mercedes Actros 1833 box truck from 2024.The truck has only driven 70,000 km.18-pallet Ekeri box with full side opening.Delivery by agreement. Km: 70000 HK: 326 Technical approved: Yes EU-approved until: 12.03.2026 Own weight: 11140 Payload: 9285 Model: Actros 1833 Predpfx Afoxpdhho Sef

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Pedpfx Afjx Nixho Sjrf

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Podpfx Afsx Nr E Ro Sorf Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Euro 5 Wheelbase: 490/135 cm 6x2 Prodpfxox Ip A Ds Af Sef 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Gearbox: Automatic

Condition: used, Comprehensively tested and refurbished used Winkworth model RT400 316 stainless steel high speed ploughshare (T-Arm) mixer. Material: Stainless steel (316) Prodox Niwwspfx Af Sof Capacity: 400 litre (Product Dependent) Mixing Chamber: 1,300mm Long x 800mm Diameter Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve Type Of Blades: T-Arm Blades Motor: 22kW SEW Geared Motor Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor. Provision for a Second Chopper. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: used, machine/vehicle number: W09SCUH3NDEN1xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 20702 Specifications: - 2013 model - 3 axles - Lift on 1 axle - Repair item - Internal height: 2.693 m - Internal length: 13.610 m - Internal width: 2.491 m - Lashings - Manual sliding roof - Full side opening - Ready for delivery Description: We have a 2013 HRD 3 axles capitol trolley repair item w/ full side opening for sale. The trolley is sold as a repair item as it is not EU approved and some additional costs must be expected. Ready for delivery Technical approved: no EU-approved until: 01.04.2025 Own weight: 8340 Total Weight: 45000 Payload: 36660 Pedowqwnmjpfx Af Serf Width: 255 Length: 1388 Model: 3 akslet kapelltralle ekt m/ full sideåpning

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Podpfx Aox Niv Hef Sjrf

Condition: used, machine/vehicle number: WDB9630201034xxxx, mileage: 269,220 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21642 Specifications: 2019 model 269,220 km (I want to know a little) Euro 6 engine 6x2 530 hp Automatic transmission Spring: full air Tires (see pictures) Refrigeration/freezing unit Zepro lift w/ remote control Longitudinal partition wall Objection length: 8,531 m Internal width: 2.493 m Pjdpexq A T Eofx Af Serf Internal height: 2,740 m P building: bus building Lift and swing on 3 axles Refrigerator Diesel heater Hang on. leather seats Air conditioning/ac Light Radio Ready for delivery Description: We have a 2019 Mercedes-Benz Actrox 6x2 box truck w/ refrigerator/freezer unit for sale. The car is in weekly operation and the mileage will therefore increase slightly. All services and maintenance are carried out at the workshop. There is also a service agreement on the generator. The starter motor and brakes on axle 2 have been replaced. Everything works as it should, according to the owner. Ready for delivery Km: 269220 HK: 530 Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 14700 Euro: 6 Model: Actrox 6x2 skapbil m/ kjøl/frys aggregat Gearbox: Automatic

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Prodpfx Afsx Nivyo Sof

Condition: used, machine/vehicle number: YV2X9J0A0FA78xxxx, mileage: 371,740 km, Year of construction: 2015, Please contact ATS Norway for more information Psdpfx Aewv I Ihof Ssrf Please provide reference number upon request: 20870 Specifications: - 2015 Model - 371,740 km - I-Shift - Euro 6 engine - 340 hp - Tires (see pictures) - 4x2 - Suspension: full air - Zepro Lift - Remote control - Internal width: 2,368 m - Internal height: 2,620 m - Internal length: 7,659 m - Arka body - Full side opening - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2015 Volvo Fm 330 4x2 Box truck w/ full side opening for sale. The car works as it should according to the owner. All services have been done by the owner himself. The car is EU approved and can be put straight into production. Ready for delivery Km: 371740 HK: 340 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 10650 Total Weight: 21000 Payload: 10275 Width: 255 Length: 1011 Euro: 6 Model: FM 330 Gearbox: Automatic