Used Barford Sx 3000 for sale (7,199)

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, controller manufacturer: Heidenhain, controller model: TNC 640, WORKSPACE CLADDING The work area is completely enclosed. - Opening width of the doors for UniSpeed 3000: 2900 mm DESIGN VIEWING WINDOW SAFETY GLASS ELECTRIC DOOR DRIVE Platform MAIN DRIVE Driven by a frequency-controlled liquid-cooled AC motor. The power is transmitted directly to the milling head without an intermediate gearbox. gearbox. - 32 kW drive power at 100% ED - 44 kW drive power at 40 % ED Torque depending on the selected speed variant. - Speed from 10 to a maximum of 6,000 rpm - Torque 637 Nm at 100% ED - Torque 875 Nm at 40 % ED TOOL HOLDER SK 50 BIG-PLUS AUTOMATIC UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN (C-AXIS 1 ° ) - Liquid-cooled milling head - Cast construction made of GGG 60 - Axes swivel automatically - Swivel range of the milling head holder (C-axis) ± 180° in degrees - Swivel range of the milling head (A-axis) in degrees± 180° - Indexing of the axes via face gearing with Partial accuracy ±3 sec - 64,800 full degree positions can be programmed via the CNC control can be programmed - Milling head with maintenance-friendly half-shell technology - Low interfering contour due to compact design and completely internal media channels - Tool holder according to selected variant - The milling spindle is equipped with a hydromechanical tool tool clamping system HEIDENHAIN KINEMATICS OPT - Internal coolant supply - External coolant supply via nozzle ring - Drive via frequency-controlled, liquid-cooled main drive motor - Speed range depending on the selected speed option of the main drive Clamping surfaces for the work area: CNC ROTARY TABLE with generously dimensioned bearings - Clamping surface: 1,600 mm - Table load (centric): 8,000 - Maximum swing diameter of the workpiece: 2,400 mm Tool changer Fpjbsvbf Dls Ey Rmljg ToolTower AUTOMATIC TOOL CHANGER - Number of tools in the ToolTower: 102 places - Maximum tool diameter with full magazine: 125 mm - Maximum tool diameter with free neighboring slots: 250 mm - Maximum tool length: 500 mm - Maximum tool weight: 30 kg - Maximum tool load torque: 440 Nm - Pure tool change time: Approx. 7 sec. - Spindle position for tool change: vertical - Fixed position coding Coolant system 950 l Frequency-controlled high-pressure pump with infinitely variable pressure control via the control unit. Pump capacity: 32 I/min at max. 40 bar Coolant tank: 950 l Filter accuracy:

Condition: used, mileage: 189,911 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,180 kg, first registration: 03/2007, emission class: euro4, color: white, Equipment: ABS, central locking, * New clutch * Maxi long * Timing belt changed at 140,000 km in 2020 * Electric windowsSpecial equipment: Fjb Ey Rjv A Nizomlopg Electrically adjustable and heated exterior mirrors, both, rear wing doors with glazing, loading area partition with window, radio preparation Other equipment: Airbag driver's side, battery 60 Ah, on-board computer, tachometer, laminated glass windscreen, belt tensioner at the front, body: 4-door, loading area lining, height-adjustable steering column (steering wheel), headlight range control, engine 1.9 liter - 74 kW JTD KAT, wheelbase 2963 mm, spare wheel in driving tires, sliding door on the right, side protection strips, seat front left adjustable in height, seat front right adjustable lengthwise / tilt, lockable fuel cap, glazing tinted green

Year of construction: 1995, Condition: good (used), machine/vehicle number: 200034, 3000 x 3, 0 mm, 4.0 mm steel, 1.5 mm aluminium, with an automatic hold-down device. ITEM 100 E control for motorised back gauge, squaring fence, 2 front support arms on linear rail 0.5-3 mm under the stop manual adjustment of the cutting gap is adjustable, a sheet transport and stacking device attached to the removal and drop the clippings, compressed air connection required, security available, machine repaired by a qualified technician, tested, cleaned fencing and light barrier and is fully functional. Test run is performed. Fobody N Rwj Ey Rmlspg Rear stop adjustable: 8-1000 mm Color: grey/blue Total power consumption: 32 A Machine weight approx.: 4000 kg Dimensions: 4000 x 1600 mm with cutting gap adjustment without cutting angle adjustment

Condition: new, Year of construction: 2024, Machine designation: Portal nailing machine for pallet production Manufacturer: Stoiber GmbH Model: StoNail 3000 Year of construction: 2024 Condition: New Fjboralk Rj Ey Rmljpg Price & Location: Price on request 4122 Arnreit Description: - Semi-automatic portal nailing machine for the production of various types of pallets & crate parts. - A flexibly adjustable clamping system or a wooden wall for templates are available for inserting loose blocks and boards to minimize changeover times. - Divided into two work areas, the machine operator always works alternately on the left or right side of the machine. - The nailing bridge is equipped with up to 8 nailing devices with jumbo coil nails (approx. 8000 nails). By controlling the nailing devices together, this machine offers very short production times and therefore high throughputs. - Machine operation and programming of new pallet types are carried out via a touch display. Existing programs can be recalled from the memory at any time. No manual movement required to teach in the nailing points! - NEW - Robot for pallet stacking Technical data: - Pallet size max. standard: 2500 x 1700 mm per side - Pallet size max. optional: 3500 x 1700 mm per side - Nail length max.: 90 mm - Jumbo coil: approx. 1000 nails/coil - Production capacity: 400 - 600 pallets/8 h - Machine operator: 1 - 2 persons - Low operating and maintenance costs

Condition: good (used), Year of construction: 2000, 1 4-Bahnen-Flachbett (die 2 äusseren für Z-Schlitten; 2 innere für Reitstock) mit verfahrbarem Z-Schlitten auf äus seren 2 Führungen; Abstand 1160 mm auf inneren Führungen für Reitstock 700 mm Bettlänge mm 5300 Spitzenweite (Drehlänge zw. Futter-Höhe und Spitzen ) mm 3000 Spitzenhöhe mm 800 Drehdurchmesser über Bett mm 1600 Drehdurchmesser über Kreuzschlitten (zwischen Spitz en) mm 1400 Umlaufdurchmesser über Schlitten mm 1200 Bettbreite Führung Aussen mm 1160 Führungsbreite Reitstock MItte mm 700 Bett geschweisst; entspannt durch WIAP-Ersatzglüh- verfahren und vibrationsgedämpft nach dem pat. Verf ahren WIAP® VDSF® (Pat.Nr. 68433; Anm.4230130.30;PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Führungsauflagen geschliffen; Führungen austauschba r ohne Bettdemontage 1.2 Spindelstock / Hauptantrieb - festangeordnet Anzahl Spindelstöcke Stk. 1 Spindelmesskreis digital / linear Achsenlagenüberwachung keine; da Rundachse Spindelbohrung mm 112 Spindelnase A15 DIN 55021 Hauptspindelmotor: 100% ED kW 46 Nm 305 Motor 1PH7184 2NE Leistungsteil 6SN112-1AA00-0FA Hinter dem Spindelstock aufgebautes 3 Stufen Getrie be Automatisches über M Funktion programmierbares Getriebe Getriebstufe 1 RPM 5,6-120 Getriebstufe 2 RPM 16-360 Getriebstufe 3 RPM 45-800 Drehmoment Stufe 1: (100%) Nm 15236 Drehmoment Stufe 2: (100%) Nm 5290 Drehmoment Stufe 3: (100%) Nm 1904 Max Drehzahl RPM 800 1.3 Längs- und Querschlitten Stk. 1 Anzahl Querschlitten Stk. Fpsb Eyjd D Nxkj Rmlsg 1 Anzahl Längsschlitten digital / linear Achsmessystem am Motor Balluf Achsendlagenüberwachung (3er-Schaltpaket) RpM 2000 Achsantrieb Z-Vorschubmotor 27 Nm mm 1005 2 X Schlitten unabhängig verfahrbar Max Abstand in nen Ueber M Funktion ankoppelbar X Schlitten 1 4 Fach Rev. und X Schlitten 2 mit Angetr. Revolver kN 27 Vorschubkraft mm 6000 Max Vorschub / Eilgang Z mm 63 x 10 Vorschubart: spielfreie Kugelrollspindel mm 3020 Verfahrweg Z-Achse m / min 6* Eilgang Z-Achse (Auslegung 10 m / min) RpM 2000 Achsantrieb X-Vorschubmotor 1FT5076 18/22 Nm kN 15 Vorschubkraft mm 6000 Max Vorschub / Eilgang X mm 50 x 10 Vorschubart: spielfreie Kugelrollspindel mm 850 Verfahrweg X-Achse m / min 10 Eilgang X-Achse 1.3a Reitstock manuell verstellbar; luftunterstützt für leichtes V erschieben vibrationsgedämpft mit Konus für Reitstockspitze Pinolen-Durchmesser mm 200 Pinolen-Hub mm 200 Hilfsschleppeinrichtung mit dem Z-Schlitten vorhand en Klemmung mit Mutter & Hebel / Ringmutter mit div. Gewinden im Umkreis; versetzbar 1.4 Führungen Alle Führungen sind auf geschliffenen Flächen und reibgeklebt Abmessungen mm 90 x 50 Härte der Stahlführungen ca. HRc 55 - 60 Gegenführungen kunststoffbeschichtet Automatische Zentralschmierung mit elektr. Kontroll e Die schweren Einheiten werden für den Leichtlauf un d gegen Verschmutzung luftunterstützt mit dem WIAP® Press-Air-Verfahren 1.5 Werkzeugrevolver mit angetriebenen Werkzeugen Werkzeugrevolver Baruffaldi TOER 320 Typ K18.0320.12041.B Anzahl Pos Pos 8 Zylinderschaft-Durchmesser VDI 60 Revolver Scheibe Durchmesser aussen mm 570 Revolver Scheibe Durchmesser VDI 60 mm 476 Scheiben Dicke mm 95 Angetriebene Werkzeuge Stk. 4

Condition: good (used), Lead and feed spindle lathe Matra SM-3000 Country of origin: Spain Turning diameter over bed 600 mm Turning diameter over support 370 mm Turning length 3000 mm Turning diameter in the crank 900 mm Length of the crank 280 mm Spindle bore 72 mm Speed range 17-1,652 rpm Spindle speed levels 36 Main motor, power 9/11 kW Rapid traverse longitudinal-transverse Tailstock MK5 Machine weight approx. 4 t Dimensions (LxW) approx. 4800x1300mm Equipment/accessories: - Fixed steady rest with rollers/max. Workpiece diameter 220 mm - Coolant system - Bed stop - Röhm lathe chuck D500mm - Digital display 2-axis SINO - Multifix C base holder The machine is in very good, fully operational condition. Price net, free loading from warehouse Feb Ey Revq I Npomlepg

Condition: as good as new (ex-display), Year of construction: 2024, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, mot. backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Fob Ey Rjg Dvpysmljpg -images similar-

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle Feb Ey Ropvlf Ssmlspg - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 49 167, bending angle: 165 °, sheet thickness steel (max.): 2 mm, back gauge: 1,150 mm, upper beam stroke: 280 mm, overall weight: 3,900 kg, upper beam opening width: 110 mm, usable length: 3,030 mm, type of input current: three-phase, space requirement width: 2,400 mm, space requirement length: 4,300 mm, space requirement height: 1,700 mm, outer dimension width: 4,300 mm, construction height: 1,700 mm, total depth: 2,400 mm, We are selling our Kramer AMaut III 3000/2 folding machine due to a new acquisition. The machine has a motorized backgauge from 10 mm to 1150 mm. The upper beam can be equipped with various bending rails. These include a 135° goat's foot rail with 150 mm freeboard, a flat 135° rail and a 165° rail. Further details can be requested. The folding bench is available immediately. The folding bench can be tested on site. Fpob Eoufcgyey Rmleg The machine is sold excluding any warranty or guarantee. A return is not possible. It is "bought as seen". Transport must be organized by the customer.

Condition: new, Year of construction: 2024, Functionality: fully functional, Milling head debarker with root reducer: Manufacturer: Stoiber GmbH Model: StoMill 3000 Year of manufacture: 2024 Condition: New Price & Location: Price on request AT - 4122 Arnreit Description: For fully automatic debarking and root reduction of hardwood and softwood. Advantages of the system: - Cutterhead debarker and root reducer in one machine - Patented safety cutterhead - Fully automatic process - Operation via radio remote control - Low energy consumption Fpob Ey Rjrk Nk Esmlsg Technical data: - Debarking shaft with 22kW or 30 kW drive power - Reducer shaft with 15kW - 45kW drive power - For all logs from a length of 2 meters - Log diameter: 20 - 120 cm Options: - Chip box - Scraper chain conveyor for chip removal - Log ejector / log collection tray

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 Fob Esr D Nmyey Rmlopg - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, next inspection (TÜV): 02/2028, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, traction control, Seat covers in fabric design Double Grid, automatic transmission, air conditioning with manual control in the driver's cab, daytime running lights (always on when driving), touchscreen, driver's airbag, sun visors with ticket pocket on the driver's side and airbag label on the passenger sun visor, radio Composition Colour, MP3 interface, emergency call system eCall, electronic stabilization program ABS ASR EDS hill start assist brake assist, central locking with radio remote control and interior operation, power steering electromechanically controlled depending on speed, steering column height and length adjustable, ParkPilot in the rear area, cruise control system including speed limiter, immobilizer (electronic), start-stop system with brake energy recovery, headrests height adjustable front and rear, exterior mirrors electrically adjustable and heated, 4 steel wheels 6.5 J x 16 in 20 hole design, lumbar supports for left and right individual seats in the 1st row of seats (both manually adjustable), laminated glass windscreen with heat-insulating glazing, Tire Mobility Set: 12-volt compressor and tire sealant, non-smoking vehicle, headlight range adjustment, service history, sliding door on the right in the loading/passenger compartment, paintwork: candy white, prepared for We Connect and We Connect Plus, heated tailgate with window, Transporter lettering on the fender without lettering on the rear, height adjustment for left single seat in the driver's cab, swivel seat on the right in the 1st row of seats (not height-adjustable), armrests for both seats in the driver's cab, 1 12-volt socket in the dashboard, approval with up to 3 seats, crosswind assistant, battery/generator, heat-insulating glass (green), tires 205/65 R 16 C 1 T optimized for rolling resistance, hill start assist, fuel tank with 70 l tank volume, standard suspension and damping, type plate for commercial vehicle with EC type approval with Weight specification with COC papers, steering wheel, full wheel covers for 16-wheels, 16-chassis with 16-brake system, bumpers in grey, standard sound deadening measures, loading sill protection (inside) in plastic, unpainted door trim, normal roof (with attachment points for roof rack systems: 8 for the short wheelbase, 10 for the long wheelbase), seat on the left in the 1st row of seats, emissions standard Euro 6d ISC-FCM, tailgate closure without unlocking function from the inside, airbags for driver and front passenger with passenger airbag deactivation, glove compartment without lighting, rubber floor covering in the driver's cab, comfort headliner in the driver's cab, interior roof paneling made of hardboard in the passenger/loading area, side paneling (half-height) made of hardboard in the loading area, registration as a truck, transport protection measures without surface protection film, folding grab handles on the roof frame, hinges for rear doors/tailgate in standard design, lashing eyes for securing the load, outside mirror housings and door handles in black, H7 halogen double headlights, 4-stage adjustable windscreen wiper interval control, standard rear lights, interior lighting in the loading/passenger compartment, non-smoking version, mobile phone interface, prior sale and errors for this offer are expressly reserved. The vehicle description is only for general identification of the vehicle and does not constitute a guarantee in the sense of sales law. The only decisive factors are the agreements in the order confi Fpsb Ey Rjvib Enjmljg

Condition: used, machine/vehicle number: n/a, Manufacturer: Fanuc Model: a22/3000 Fpjb Ey Rmeu Egv Iolsg Motor Spec.A06B-0148-B675 Technical Data Output 4 kw Volt 132V Amp ~ 20A Frequency 200 Hz Speed 3000 rpm

Condition: good (used), Functionality: fully functional, Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Fpeb Ey Rmov Auf Islsg Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: used, mileage: 117,893 km, power: 92 kW (125.09 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,098 mm, overall weight: 2,820 kg, empty load weight: 2,007 kg, maximum load weight: 813 kg, first registration: 07/2017, next inspection (TÜV): 01/2026, loading space length: 2,537 mm, loading space width: 1,662 mm, loading space height: 1,387 mm, loading space volume: 5 m³, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, traction control, trailer coupling, Empty weight: 2007 kg, permissible total weight: 2820 kg, loading space (L W H): 2537 mm x 1662 mm x 1387 mm, loading space volume: 5 m³, fabric seats, 1 x airbag, trailer hitch ball, electric stability program ESP, driver's comfort seat, driver's armrest, passenger bench seat for 2 people, radio with MP3, multifunction steering wheel, power steering, driver's lumbar support, 2 electric windows, electric and heated outside mirrors, immobilizer, central locking with remote control, optics package: optics package 3, wooden loading space floor, high wooden loading space wall paneling, rear doors 180° opening angle, daytime running lights, roof rack, service shelf equipment, CARGO flap in loading space partition, errors, changes and prior sales only to commercial customers. Fpsb Ey Rjvpvb Remleg

Condition: used, Year of construction: 2007, Functionality: fully functional, MANUFACTURER: SACMI MODEL: RMFV/AD 960 16 T S2/E2 + S3/E3 SX HEADS: 16 TYPE OF LABEL: PAPER, PLASTIC GLUE: COLD GLUE + SELF-ADISIVE Fjb Eyev Exn Ee Rmlepg YEAR: 2007 S.N.: M0040906 PRODUCT: WAS WORKING ON WINE IN GALSS BOTTLE EFFECTIVE SPEED 12,000 BPH NOMINAL SPEED: 15,000 BPH FORMATS: 375 ML CLASSIC BORDOLESE 75 CL CLASSIC BORDOLESE 75 CL EUROPEAN BORDOLESE 75 CL BORDOLESE MED. 75 CL BURGUNDY TRADITION 75 CL REGGIANA 150 CL BORDOLESE CONFIGURATION: LINEAR ANTI-CLOCKWISE ELECTRICAL DATA: STD: 400V - 50/60Hz + T + N PLC: OMRON PANEL VIEW PRO-FACE

Condition: new, turning length 3000 mm turning diameter 800 mm turning dia. in gap 1000 mm turning diameter over slide 540 mm turning speeds 25 - 1600 U/min quill: 5 MK quill travel 235 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 3820 kg. dimensions 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 100 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Rapid traverse lengthwise and facewise - Slip clutch - Coolant system - Quick-change tool holder with 4 inserts Fpeb Eovlltujy Rmlsg - Protective device for quick-change tool holder - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, Year of construction: 2025, Functionality: fully functional, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Fsb Eeiink Ssy Rmlspg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, turning length 3000 mm turning diameter 660 mm turning dia. in gap 900 mm turning diameter over slide 460 mm turning speeds 25 - 1600 U/min quill: 5 MK quill travel 235 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 3.300 kg. dimensions 4.630 x 1.200 x 1.529 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE Fob Ey Rovllthemlopg - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Change gears - Reduction sleeve - Chip back wall - Cable routing via energy chain - Operating tool

Condition: new, Year of construction: 2025, Functionality: fully functional, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Fob Ey Rmjiivgyeljpg Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, Year of construction: 2025, Functionality: fully functional, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Fpjb Eyoiivfqj Rmlsg Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, Year of construction: 2025, Functionality: fully functional, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm Fpob Eyjiivc Ds Rmleg from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, Year of construction: 2025, Functionality: fully functional, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism Fpsb Ey Rmof T Rzfelog - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, Year of construction: 2025, Functionality: fully functional, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Fpob Ey Rmjiivgrjleg Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, Year of construction: 2025, Functionality: fully functional, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm Fpeb Ey Rec S N Nqomleg variable three-roller bending machine