Used Maho Mh500C Cnc for sale (8,615)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x2300x1780 mm Weight 4000 kg Dob Enjvz Hrdjgtysut Total power requirement 27,2 kw

Condition: ready for operation (used), Year of construction: 2007, Control Unit Djb Eowbauwengtyout Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3100 mm Y-Axis Movement 1600 mm This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN. Application Types Punching

Condition: good (used), DUGARD CNC LATHE FANUC CONTROL HYD CHUCK 450 MM MAX TURNING DIA 700 MM TURNING LENGTH 3500 RPM SPINDLE TOOL SETTER TAILSTOCK 77 MM BAR CAPACITY SWARF CONVEYOR Dob Engtowaa D Noysut 18.5 KW MOTOR THIS MACHINE WILL BE IN STOCK SOON

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, cutting width (max.): 1,300 mm, This heavy duty turning lathe is located at a renowned Bulgarian shipbuilding company and is being replaced by a new machine from SAFOP. It is available for immediate inspection. Manufacturer: WOHLENBERG Model: UE 1400 III Center height: 750 mm Center distance: 7000 mm Swing diameter over bed: 1300 mm Swing diameter over faceplate: 550 mm Swing diameter over cross slide: 1000 mm Feed rate: 60 m/min Tailstock quill taper: MK6 Z-axis travel: 7500 mm X-axis travel: 1000 mm Max. workpiece weight: 21,000 kg Tool holder: Capto, various extensions Tool magazine (number of tools): 3 Dob Enswg Sc Djgtyeut Standard tool list: no Max. spindle speed: 300 rpm Power: 75 kW Condition: Very good (immediately operational)

Condition: ready for operation (used), Year of construction: 1995, BAD DUBEN Model PRX 32 E - CNC Used - in excellent condition Bad Duben: 2 The Cylindrical Thread Roller Brand: BAD DUBEN Model: PRX 32 E - CNC Type: Threading Machines, Thread Rollers, Cylindrical Die Condition: Used, good condition Serial no.: 17 Year: 1995 Max rolling pressure: 16 T Workpiece diameter: 6 - 24 mm. Dujb Engtsv Imqyeyjt Thread Length: 200mm. Roller diameter: 195 mm. Max pitch: 3mm. Speed Range of roller splindles: 40-315 Diam: 210 mm. Weight: 4,500 kg. Visible c/o H.B.R. srl - Calolziocorte (LC) - Italy

Condition: good (used), Year of construction: 1993, Functionality: fully functional, turning diameter over cross slide: 530 mm, turning length: 850 mm, turning diameter: 450 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 330 mm, travel distance Z-axis: 850 mm, spindle motor power: 30,000 W, total height: 1,800 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, extraction, coolant pump 8 bar, chip conveyor, in good condition in relation to its age, very few spindle hours and very well maintained. Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Dob Eevta H Eongtyjut We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2160x1080x1650 mm Dsb Ensvz Ha Uogtyeut Weight 1500 kg Total power requirement 12 kw

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Machine weight 17500 kg Control Unit Model WIN NT Dujb Engowbauqstyot Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm General Data Machine weight 17500 kg Control Unit Model WIN NT Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Application Types Punching

Condition: used, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: 650000010BE, With C-axis and driven tools MAPPS4/MSX-853 IV control system Dusb Eowg D Thjngtyjt

Year of construction: 2001, Condition: good (used), CNC lathe Manufacturer: OKUMA Dujb Engtek Hz Iwoyst Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Coolant system and chip conveyor

Year of construction: 2023, Condition: as good as new (ex-display), plate roll 1500 x 6 mm • Hydraulic 4 roll plate bending machine with prebend • Model MG • Plate width up to 1500 mm • Capacity thickness 6 mm • Pre-bend 4 mm • Fully hydraulic operated dual initial pre-pinch • Linear guideways technology best prebend • Top roll 130 mm - lower roll 120 mm Dusb Eneizi Edegtyet • Centralized hydraulic power unit 4 hp • Hardened rolls highest resistance surface • Conical plate bending with rolls tilt and contrast roller. • Drop end open hydraulic - unloading closed shells. • Mobile control console electric operated with digital readout • Programmable digital controller save & repeat automatic NC • 300 programs memory storage – industry 4.0 network connect • Safety installation and emergency stop • Manuals of service and schematics

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Dsb Engtevta Rkeyjut Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x1400x1700 mm Weight 1950 kg Dsb Engtjvz Euwsyjut total power requirement 11,4 kw

Condition: excellent (used), Year of construction: 2020, OKUMA CNC turning Centre with Y-axis, C-axis, sub spindle and live tooling Type:LB3000 EXII Year:2020 Control:OSP-P300LA Suite Dsb Engewc Arhjtysut Y-axis:+70mm / -50mm W-axis:800mm Distance between centres::1020mm Turning diameter over bed:580mm Turning diameter over cross slide:470mm Max. workpiece diameter:410mm Spindle bore:91mm Main spindle speed:4200rpm Sub-spindle speed:6000rpm Toolchanger:12atc Machine weight approx.:6850kg With automatic doors (original from the factory) With parts catcher Option extended tool data management Smoke extraction Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, upon request Djb Engofxgmgjtyjut

Condition: used, Year of construction: 2022, 3 axes DOOSAN DNM 4500 year of production 2022 FANUC and Series PLUS Dujb Eswa Trtsngtyet travel: X-800mm Y-450mm Z-510mm Table dimensions 1000 x 450 mm Spindle speed max 8000rpm SK40 spindle taper Tool magazine 30 pieces on SK40 - cooling through the spindle -2x Renishaw probe -Cromar chip conveyor

Condition: used, machine/vehicle number: 007738, X axis working area: 3280 mm Dusbsvu If Se Engtyet Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 5 axes Total number of drilling spindles: 28 Total number of tool changer positions: 28

Condition: good (used), Year of construction: 2004, Functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle speed (min.): 3,800 rpm, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300MY, with E-100L control, A-turret V12 all driven VDI4-40 M-function for milling, B-turret V-8, tailstock, chip conveyor, coolant system 8 bar, MY function Y-axis, touch setter, approx. 15,500 spindle hours, built in 2004, good condition and fully functional, available immediately. Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Dob Engtjvta Nyoyout

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Dueb Engjvz Etmstyjt Weight 1000 kg Total power requirement 9 kw

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Dsbeirmyqo Engtyjut Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180°

Year of construction: 1995, Condition: excellent (used), Crosshead table with 2 clamping circuits Deb Engogmt Ekjtyout x- 5000 y- 1350 z-450 a-190* Main spindle SK 40 water cooled 8kw up to 17000 rpm chain magazine with 24 places machine has not run much

Condition: good (used), Year of construction: 2009, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders Duobsvta Rds Engtyst - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Dusb Engtevz Epheyjt Weight 1600 kg Total power requirement 14 kw

Condition: good (used), CNC grinder 3 grinding units on each side Dob Engevviametyeut

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x1300x1780 mm Weight 1000 kg Dsb Enovz Egyogtyjut Total power requirement 5,5 kw