Used Hyundai Robex 290Lc-7 for sale (169)

Condition: new, Year of construction: 2022, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 145A - New vehicle - Crawler excavator - Track drive - Rubber tracks - Without attachments - Radio - Operating hours: 16.9 Guodpfx Aoxhbiaebreh - Engine 100 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W63 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: new, feed pressure 8 bar Effective free air delivery 125/85 L/min Receiver capacity 24 / 8 l / bar weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. motor 230V / 0,75KW V / KW Gsdpfxeu Imhie Abreuh range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: used, Year of construction: 2019, operating hours: 5,960 h, Year of manufacture: 2019 Drive: Wheel Guedpfx Aexb Aukjbreh Empty weight: 19.000 kg Dimensions (LxBxH): 876 x 250 x 342 cm Digging depth: 5.9 m

Condition: used, Hyundai Wia LV-1100RM C Axis Vertical Lathe – 2020 Model Operating Hours: 995 hours CNC Controller: Fanuc 32i-B Chuck: 32 inch Maximum Turning Diameter: 1160 mm Maximum Turning Length: 1000 mm Spindle Bore Diameter: 110 mm Spindle Speed: 800 rpm (Gearbox) Spindle Power: 65 kW Torque: 7,671 Nm Number of Tools: 12 C Axis Milling (Live Tool) Speed: 3,000 rpm X/Z Axis Travel: 620 / 1000 mm Gujdpfxoxgczbs Abreh X/Z Axis Rapid Traverse: 24 / 24 m/min Machine Weight: 22,000 kg *All machine accessories and standard tooling, including 2 live tools (vertical and horizontal), will be supplied.

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Gedpsxadmrjfx Abrjuh Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 30 positions

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor. Gedpfx Abou Ehi Asrsuh

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HX 220AL - New vehicle - Crawler excavator - Track drive - Without attachments - Radio - Operating hours: 15.7 Gusdpfsxhbhvsx Abrjh - Engine: 129 kW - Camera - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W64 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: new, rated capacity 2,6/2,8 KW frequency 50 Hz output voltage 2 x 230AC / 1 x 12DC V tank capacity 15 l weight of the machine ca. 48 Kg dimensions of the machine ca. 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet; only 59 dB (A) at a distance of 7 m. Guodeu Imnvopfx Abreh - Fuel: Euro unleaded

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6-030, turning diameter over cross slide: 254 mm, turning length: 500 mm, spindle bore: 70 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 510 mm, overall weight: 4,300 kg, - Year of manufacture: 1996 - First commissioning: 1998 - Single owner, used in our own operation - Fully functional, powered and ready for demonstration Gsdpfx Asxgtvcjbrouh - X-axis travel: 180 mm - Z-axis travel: 510 mm - Turning diameter: 254 mm - Turning length: 500 mm - Spindle speed: 3,600 rpm - Spindle bore: 70 mm - Spindle motor power: 15 kW - Control: Siemens 840 C - Chip conveyor - 8-position turret - 3-jaw chuck with hollow clamping cylinder - Fully automatic tool presetter - Dimensions: 2,600 x 1,650 x 1,830 mm – 4,300 kg Net price ex-works Luckenwalde (Germany), excluding transport

Condition: good (used), power: 221 kW (300.48 HP), fuel type: diesel, color: yellow, Year of construction: 2013, operating hours: 9,182 h, Equipment: air conditioning, Technical information Chassis type: articulated Empty weight: 23.200 kg Make of engine: QSL9 Top speed: 46 km/h Functional Lifting capacity: 15.350 kg CE mark: yes Condition Technical condition: good Gujdpfew Uk Uaox Abrjh Visual appearance: good Identification Serial number: HHKHLK04LD0000050 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 8,6x3,1x3,59 Production country: KR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, functionality: fully functional, machine/vehicle number: HKHHN05KC0000861, Year of construction: 2012, operating hours: 4,030 h, load capacity: 3,150 kg, lifting height: 4,300 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, power: 48 kW (65.26 HP), fork length: 1,800 mm, drive type: Diesel, Diesel Forklift Chassis number: HKHHN05KC0000861 Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 28x9-15 Front tires condition: 20 - 40% Rear tires type: Superelastic Gusdpsxafa Tsfx Abroh Rear tires size: 6.50-10 Rear tires condition: 60 - 80% Description: In addition to this MAKE-MODEL, we have around 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in stock at our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase & financing on fair terms are always possible for us. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Call me, Marco Levermann, I will be happy to advise you in detail on this MAKE-MODEL. By the way: Our forklift workshop specializes in repair and maintenance of large machines from 8 tons upwards. We can also offer your vehicle for commission sale through us. Side shifter, 3rd valve, 4th valve, half cabin, heater,

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 320 mm, spindle bore: 80 mm, bar diameter (max.): 70 mm, Complete with accessories as shown in the photo Guodpfx Abjxhdvpersh

Condition: like new (used), Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, Hyundai WIA KF 5600C Machining Center (LIKE NEW) Gsdpsxf Ey Djfx Abrsuh Hyundai WIA KF5600 C Commissioned: 2019 Table: 1250 x 560 mm 12,000 rpm X/Y/Z travels: 1100 x 560 x 635 mm 10.4” display Random magazine for 30 tools Internal coolant at 30 bar Chip conveyor Renishaw TS 27R probe PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: new, rated capacity 3,0 KW rated current 16/8,3 Ampere output voltage 2 x 230AC / 1 x 12DC V Gedpfx Aju Imf Uobrouh tank capacity 12 l engine output 7,0 PS weight of the machine ca. 45 Kg dimensions of the machine ca. 0,68 x 0,58 x 0,54 m Exhibition machine!! The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine)

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 70TY5064, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,600 mm, total length: 1,640 mm, total width: 2,349 mm, table width: 380 mm, table length: 380 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 14, The Hyundai SPT-V30TD is a compact 3-axis vertical machining center designed for high-speed drilling, tapping, and light milling applications, typically found in precision component manufacturing environments. The machine features a robust structure and is equipped with a Yasnac CNC control—known for reliability and effective motion control. Main Specifications: Travel: X: 500 mm, Y: 300 mm, Z: 300 mm Spindle Speed: Up to 8000 RPM, with BT30 (ISO 30) spindle taper Table Size: 600 mm x 380 mm Max Table Load: 200 kg ATC: 14 tool capacity, carousel type Control: Yasnac J50M Machine Dimensions (L x W x H): 1640 x 2349 x 2600 mm Weight: Approx. 3500 kg Notable Features: Rapid traverse rates (X, Y, Z): up to 30 m/min Godpfx Abexgdlujrouh Dual table/pallet changer is sometimes featured, increasing productivity Compact footprint designed for efficient shop floor space use Suitable for drilling up to 20 mm, tapping up to M16, and various milling operations Machine need to be fixed. It shows fault 310: Servo Off.

Condition: used, Year of construction: 2021, operating hours: 4,220 h, Year of manufacture: 2021 Drive: Wheel Empty weight: 19.000 kg Dimensions (LxBxH): 876 x 250 x 342 cm Guedpfx Aev Sc N Tebroh Digging depth: 9.3 m

Condition: new, Year of construction: 2024, fuel type: diesel, power: 875 kW (1,189.67 HP), motor manufacturer: Hyundai DP222CC, General information Field of application: Construction Serial number: DX22-OOG00401490 Weights Empty weight: 9.561 kg Functional Generator capacity: 1.000 kVA CE mark: yes Other information Fuel consumption: 162 Liter / Hour at 75% Load PRP Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Gsdeugfa Eepfx Abrouh Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1410 l Transport dimensions (LxWxH): 5x2,25x2,6 Production country: TR Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP222CC / Doosan DP222CC

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Built in 2005, it is equipped with a Siemens 810D CNC control and features ideal for multi-axis machining, including automatic tool change and dual-pallet machining capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of Manufacture: 2005 CNC Control: Siemens 810D Machine Weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle Taper: ISO 40 Spindle Speed: 10,000 rpm Spindle Motor Power (cont. / 30 min): 12 / 16 kW Machining Capacity X-Axis Travel: 570 mm Y-Axis Travel: 410 mm Z-Axis Travel: 580 mm Distance from Spindle Nose to Table Surface: 197 – 777 mm Distance from Column to Spindle Center: 495 mm Table Table Dimensions: 2 x (650 x 410 mm) Number of Tables: 2 Maximum Table Load: 2 x 200 kg No. 2 Rotary Tables Ø160 mm with counter support Feed Rates Rapid Traverse X/Y Axes: 36,000 mm/min Rapid Traverse Z Axis: 30,000 mm/min Cutting Feed Rate X/Y/Z Axes: 1 ÷ 10,000 mm/min Gedpfx Ajxfarhsbreuh Automatic Tool Changer Tool Taper: BT-40 Tool Magazine Capacity: 24 stations Max. Tool Diameter: Adjacent Tools: Ø90 mm Non-adjacent Tools: Ø150 mm Max. Tool Length: 300 mm Max. Tool Weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line chiller Transformer Manuals, electrical diagrams, and CE Declaration

Condition: used, mileage: 63,791 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,160 kg, first registration: 05/2016, loading space length: 2,375 mm, emission class: euro5, color: white, number of seats: 3, total length: 5,150 mm, total width: 1,920 mm, total height: 1,925 mm, Equipment: ABS, air conditioning, central locking, soot filter, Errors and prior sale excepted! Internal number: 1051. U780351 ----EQUIPMENT * Manual air conditioning – incl. pollen filter and recirculation switch * PIONEER radio with CD player * Transmission: 6-speed manual gearbox * Fog lights * ABS with EBD * Passenger side airbag * Driver side airbag * Exterior mirrors (2), electrically adjustable and heated * Brake assist * Rear double-wing doors * Tachometer * ESP (Electronic Stability Program) * Power windows, front * Tinted windows * Heated rear window with timer * Height-adjustable headrests (2) * Paintwork: Solid paint * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Sliding side doors, closed Godpjhznt Rjfx Abreuh * Mud flaps front and rear * Side impact protection * Power steering * Passenger double bench seat * Driver’s seat longitudinally adjustable * Partition with viewing window * Lashing eyes (10), lateral * Immobilizer * Central locking ... and much more. ----The vehicle is unprepared! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to consider your vehicle as part of a trade-in. Financing / leasing possible without down payment! Do you have any questions? We are happy to assist you!

Condition: used, mileage: 98,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2016, emission class: euro6, color: silver, number of seats: 3, total length: 5,515 mm, total width: 2,038 mm, total height: 2,685 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly & easily Internal ID Number: [ 2848 ] ----Optional extras available: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available with or without down payment ----Vehicle highlights: Gusdpfoxchu Ejx Abrjh * 19% VAT deductible * Accident-free * Regularly serviced * Euro 6 emission standard * High roof + medium wheelbase * Special features: Metallic paint, tow bar 3000 kg, auxiliary heater, air conditioning, cruise control, rear view camera, navigation system, on-board computer, parking assistance, multimedia screen, Bluetooth function, leather trim, etc. Further equipment: Driver’s airbag, exterior mirrors with integrated turn signal, 100 Ah battery, 105 Ah battery, on-board computer, driver assistance system: emergency brake assist, front windscreen with upper tint, 130 A alternator, rear wing doors (180-degree opening), body type: high-roof panel van (standard), black radiator grille, load compartment partition without window, engine 2.5 L - 110 kW CRDi CAT, radio pre-equipment, 2 speakers, wheelbase 3435 mm, tire repair kit, particulate filter, low emissions according to Euro 5 standard, sliding door right side (load/passenger area), height-adjustable driver’s seat, seat upholstery: synthetic leather, front cabin: single passenger seat, start/stop system, 3 x 12V sockets in cab, electronic immobilizer, remote central locking, permissible total weight 3.50 t ----Interested in leasing or financing? We offer attractive deals – even without a down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information online is non-binding and provided solely for general vehicle description purposes. Errors, typos, and prior sale excepted. The binding condition of the vehicle is defined exclusively in the on-site purchase contract or through written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers.

Condition: not inspected (used), Year of construction: 2004, turning length: 250 mm, turning diameter: 300 mm, Siemens control Capacity 254x300mm Guodpfx Abewmbwworeh 8-station turret Chip evacuator

Condition: excellent (used), Year of construction: 2023, operating hours: 1,000 h, Hyundai HX130ALR WITH CENTRAL LUBRICATION Year of manufacture: 2023 Operating hours: approx. 1000 Engine model: Cummins F3.8 Power: Net output of 55 kW (72 hp) at 2,200 rpm Emission standard: Certified according to EU Stage V Weight: approx. 13,500 kg Turbo II pre-cleaner Stick: 2260 mm Stick safety valves With work lights Adjustable boom: 4560 mm Front dozer blade Boom safety valve With bucket linkage Counterweight: 2450 kg Standard keys Front work lights LED beacon Rearview camera Hi-mate (mobile version) Fuel pump Crawler undercarriage Standard safety railings Laminated 7-mm windows 2-way piping for hydraulics Central lubrication Beka (V) Piping for quick coupler Proportional hydraulic lines 19-inch Kawasaki joystick Bucket/grab changeover Godpfxsxb U R Re Abreuh Without slew lock Air-cushioned, heated seat Hydraulic oil - VG46 Rain protection Proportional joystick Road-liner 500 mm 43-link Central lubrication

Condition: good (used), Year of construction: 2000, Vertical machining center, Hyundai brand, model SPT-T30, year 2.000. Maximum spindle speed: 8,000 RPM, travel X: 500 mm, Y: 300 mm, Z: 300 mm, ISO 30 taper, work table: 900 x 600 mm, tool magazine of 14 units. Godpfx Asu Apw Ajbrjuh

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Gujdpfx Aexfaqwjbrsh Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: not inspected (used), Year of construction: 1999, turning length: 500 mm, turning diameter: 440 mm, Siemens control Capacity 500x440mm Gusdpfx Abjwmbw Rsreh 8-station turret Chip evacuator