Used Manitou Mlt 730 Turbo for sale (842)

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 3,342 h, load capacity: 2,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 43 kW (58.46 HP), empty load weight: 5,000 kg, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 0 - 20% Rear tire type: Solid rubber Rear tire condition: 0 - 20% Description: Manitou MT620 – 6m reach – 2-ton lifting capacity – year of manufacture 2009 – 3342 operating hours – mechanical quick coupler – 3-cylinder Perkins diesel engine, 43kW – 4-wheel steering – 4-wheel drive – 3 steering modes – cab – heater – lighting system – auxiliary hydraulics to the fork carriage, 3rd valve – with used pallet forks – front tires 20% – rear tires 20% – new bucket available at an extra cost – overall height: 1.92m – width: 1.80m – weight: approx. 5 tons – good condition – all mechanical – very maneuverable Djdpfszkc I Aox Aiteuw 3rd valve, heater, Cab – heater – lighting system

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,678 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,140 mm, power: 35 kW (47.59 HP), drive type: Diesel, Diesel forklift Mast type: Duplex Dujdpezkc Ivjfx Aitow Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: Front forklift - Diesel forklift MANITOU MI25D - - - Series S2E3 - - 2.5 ton lifting capacity - - Side shifter - - Duplex free-lift mast - - - Overall height 2.14m - - Lifting height 3.30m - - - Year of manufacture 2017 - - - 1678 operating hours according to display - - - 4-cylinder YANMAR diesel engine 47 hp - - Solid rubber tires approx. 90% - - 4th control circuit to fork carriage - - - Mechanical hydraulic levers - - Very maneuverable forklift - - Good tires - - Lighting system Side shifter, 3rd valve, 4th valve, heater, full cabin.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,100 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,210 mm, fuel type: diesel, mast type: triplex, construction height: 1,988 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,045 mm, drive type: Diesel, construction width: 1,450 mm, All-terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Very good Front tires Type: Pneumatic Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: With the MC25, available as a two-wheel or all-wheel drive, you can load loads safely and precisely on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimum safety at work. Discover the MC25, your new partner for more productivity! This Manitou rough-terrain forklift is also available in two-wheel or four-wheel drive technology in the MC 25-2 or MC25-4 or MC 30-2 or MC 30-4 version. Sideshift, Duedpfszhp Ahsx Aitew 3rd valve, rear working lights, front working lights, semi-cab, full free lift,

Condition: new, Year of construction: 2026, total length: 6,100 mm, Articulated telescopic work platform Manitou 150 AETJC Drive Electric Djdpozh Ra Isfx Aitouw Year built 2026 Work height (mm) 15,000

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Lifting height (mm) 29,900 Duedpfx Aijzhpkxotsw Lifting weight (kg) 6,000

Condition: good (used), Year of construction: 2015, operating hours: 565 h, fuel type: electric, Year of manufacture: 2015 Drive: Wheel GVW: 6.550 kg Mast: articulated arm Lifting capacity: 200 kg Working height: 1.200 cm CE mark: yes Technical condition: good Visual appearance: good Manitou 120 AETJ-C 3D – Year 2015 | Only 565 Operating Hours | Electric Articulating Boom Lift For sale: a very well-maintained Manitou 120 AETJ-C 3D from 2015 with only 565 operating hours. This compact, fully electric articulating boom lift is ideal for warehouses, industrial facilities, maintenance work and indoor applications where quiet, zero-emission operation is required. Dedpfx Aiszkttpjtjuw With a working height of approximately 11.95 metres and a horizontal outreach of 7.0 metres, the 120 AETJ-C 3D delivers excellent performance in confined spaces. The 3D rotating jib provides additional flexibility, making it easy to access difficult working areas. Thanks to its exceptionally low operating hours, the machine is in excellent condition and ready for immediate use. Key Features: Year: 2015 Only 565 operating hours Working height: approx. 11.95 m Horizontal outreach: approx. 7.0 m Fully electric drive system 3D rotating jib Compact and highly manoeuvrable Quiet, zero-emission operation Excellent condition Ready for immediate use An excellent choice for professionals looking for a compact, reliable and versatile electric boom lift.

Condition: used, color: other, operating hours: 66 h, Quick coupler system: Yes Serial number: MMCMLA6JA00060430 Number of hours: 6.6 hours Key included: yes Two speeds with speed control + hydraulics 4-point quick-change kit Heated cab with door and windows Mechanically suspended seat 405/70-20 14-ply bias-ply tires Rear counterweight kit (AL600) LED work lights with road lighting Easy Link module Towing hitch kit 7-pin rear power outlet Narrow fender kit Unused Dedpfxszki Iij Aitjuw Online auction of construction, agricultural and industrial machinery (including. mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders and skid steer loaders, aerial platforms, trucks, mobile compressors, power generators, rollers, scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Wednesday 8 July and closes Wednesday 22 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 July Pickup days are on: - Tuesday 28 July - Thursday 30 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 7,097 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,900 mm, power: 55 kW (74.78 HP), empty load weight: 4,500 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid Mast type: Telescopic Condition: Ready for operation and fully functional Dusdpfx Aiozirmfjtjw Technical condition: Good Front tire type: Air Front tire condition: 40 - 60% Rear tire type: Air Rear tire condition: 40 - 60% Description: Manitou MT 625 telescopic handler (ST3B series) - - 2.5-ton lifting capacity - - - 6m reach - - - Year of manufacture 2015 - - - 7097 operating hours according to the meter - - - 2-speed hydrostatic drive - - - mechanical quick coupler - - - 4-cylinder KUBOTA diesel engine, turbo, 75 hp - - - 4-wheel steering - - - 4-wheel drive - - - 3 steering modes - - - 4500 kg operating weight - - - Overall height 1.9m - - Width 1.80m - - Length 4m - - - - Tire condition approximately 50% - - - Including used pallet fork - - - Very maneuverable handler - - Telescopic forklift in good condition - - - NEW bucket available for an extra charge!! - - - Inspection and test drive possible - - Including CE declaration of conformity + operating manual - - - Delivery possible. Quick coupler, 3rd valve, 4th valve, work lights front, heater, full cabin, CE certificate.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 1,200 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 26 kW (35.35 HP), empty load weight: 4,710 kg, total length: 3,470 mm, drive type: Diesel, construction width: 1,490 mm, Rigid telehandler Load centre: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New unit Technical condition: New Front tyres type: Pneumatic Front tyres size: 12 R Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 12 R Rear tyres condition: 80 - 100% Dsdpfjzgybxjx Aitjuw Third hydraulic valve, rear work light, front work light, heating, full cab, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 3,280 h, load capacity: 200 kg, empty load weight: 8,100 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated Boom Lift Duodpfx Aiszgybrotsw Transmission: Hydrostatic Technical Condition: Good Front Tire Type: Solid Rubber Front Tire Condition: 80 - 100% Rear Tire Type: Solid Rubber Rear Tire Condition: 80 - 100% Description: The articulated platform Manitou 160 ATJ+180 ATJ is ideal for outdoor work on uneven or inclined surfaces. With a lifting capacity of 230 kg, an articulation height of 7.38 m, and a working height of 16 - 18 m, it ensures a wide working range. Featuring a diesel engine and four-wheel drive combined with three control modes, the 160 ATJ+180 ATJ stands out for its high performance and autonomy. The ergonomic control panel design provides a clear and user-friendly workspace. Thanks to hydraulic speed control, noise levels and fuel consumption are reduced.

Condition: good (used), Year of construction: 2016, fuel type: diesel, Weights Empty weight: 4.150 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.191 cm Dimensions of cargo space: 440 x 180 x 245 cm Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 683 m Max swing of platform in degrees: 350 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Manitou Model: MAN GO 12 Year of build: 2016 Djdpjzf E Rpsfx Aitjuw Condition: Used Data: Max. working height: 11,91 m Movable up to working height: 11,91 m Platform height: 9,91 m Max. reach: 6,83 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,49 x 0,77 m Gradeability: 40 % Overhang: 0,18 m Swivel range: 350° Ground clearance: 0,20 m Total dimensions LxWxH: 5,51 x 1,81 x 2,02 m Transport dimensions LxWxH: 4,40 x 1,80 x 2,45 m Drive type: Diesel Empty weight: 4.150 kg Special features: Rotating work basket, basket arm, all-wheel drive, PPE attachment points available, compact and lightweight machine. Due to the narrow design of the upper carriage, you have a clear view of the wheels, making it very easy to maneuver.

Condition: good (used), Year of construction: 2012, operating hours: 7,701 h, fuel type: diesel, Manitou 160ATJ articulated boom lift / work platform, 16m working height, 4x4x4, 2012, Diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Duedpfezi Svgox Aitow Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Duedpfxjzgpbbe Aitjw Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovation work on low-rise buildings. The compact machine, 1.80 m wide and less than 2 m high, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy maneuverability. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and the telescope, thus increasing productivity. 3rd valve, full cab, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 230 kg, empty load weight: 8,100 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated telescopic boom lift Transmission: Hydrostatic Technical condition: New Front tire type: Solid rubber Front tire size: 18 Djdpfx Aijzgpa Rstouw Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire size: 18 Rear tire condition: 80 - 100% Description: The 180 ATJ articulated boom lift has a lifting capacity of 230 kg and a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloping, and congested surfaces. Thanks to its off-road capabilities, it is the ideal work partner on construction sites with uneven ground. The new, stepless hydraulic speed control reduces noise levels and fuel consumption. As with the other combustion engine-powered boom lifts, the 4 drive wheels and 3 steering modes facilitate movement and positioning of the machine on congested or narrow construction sites. The design of the control panel ensures a clear working environment for quick operation and immediate productivity.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-12 Dsdpfx Aiszgpawetjuw Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its kind. It can be used in the wood and paper industry, in the recycling sector, in logistics applications, etc. Whether in an industrial building, in the yard, or on light terrain, the hydrostatic transmission, in combination with the powerful engine and two drive wheels with a large diameter, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 has a steering axle with an integrated cylinder, which gives it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Side shifter, 3rd valve, half cabin, full free lift, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 350 h, load capacity: 200 kg, empty load weight: 6,700 kg, construction height: 1,970 mm, fuel type: electric, total length: 6,050 mm, drive type: Elektro, arm reach: 7,600 mm, construction width: 1,500 mm, working height: 15,000 mm, Articulating boom lift Technical condition: normal Front tires type: solid rubber Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires condition: 80 - 100% Description: The Manitou 150 AETJ-C electric articulating boom lift is the lightest in its class, which means it exerts relatively low ground pressure with its wheels. With a lifting capacity of 200 kg and a working height of up to 15 m, this self-propelled work platform is the ideal solution for your transport and maintenance tasks. The drive battery can be recharged frequently and stands out for its long service life. In transport mode, the 150 AETJ-C remains under 2 m in height. Thanks to its compact design, it is easy to find storage space for this lift. Efficient work at height is made possible by the performance of the AETJ 150-C’s articulated platform. This electric model for two operators offers a maximum working height of 15 meters and features a basket with a perforated floor, perfectly suited for industrial requirements. With its articulated boom and robust construction, this machine can also operate in confined spaces. Avoid obstacles and improve responsiveness with the 150 AETJ-C. Thanks to the pod’s high autonomy, you can work all day without needing to recharge the machine. Djdpfjxuw Nvox Aitouw

Condition: new, Year of construction: 2024, fuel type: diesel, power: 74 kW (100.61 HP), fork length: 1,200 mm, color: red, Lifting capacity: 4,000 kg. Maximum lifting height: 17.55 m. Maximum forward reach: 13.08 m. Unladen weight: 12,560 kg Forks: 1,200 mm. Controls: JSM Joystick Only for export outside the EU. Duedpfsvz Uckox Aitsw = More information = Transmission: Torque converter Year of manufacture: 2024 Lifting capacity: 4,000 kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,500 h, load capacity: 7,000 kg, lifting height: 24,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telescopic Handler Load center: 600 Mast type: Telescopic Dodpfxezfbvuj Aiteuw Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 445 / 65 R22.5 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 445 / 65 R22.5 Rear tire condition: 80 - 100% Description: The MRT 2470 Privilege Plus is an all-terrain rotating telehandler, ideally suited for applications in construction and industry. This machine is a significant asset for your material handling needs. It combines three machines in one: telehandler, crane, and work platform. Its 360° rotation capability allows you to perform various tasks without having to reposition the machine. The boom features a pentagonal cross-section, providing very high precision during operation and maintaining lateral rigidity regardless of wear. This offers added safety for you and your team. Soon, you won’t want to be without this powerful, precise, and versatile machine. 3rd hydraulic valve, air conditioning, Remote control available on request with bucket or light material bucket (1000 or 1500 liters), large swivel man basket.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,500 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,870 mm, power: 36 kW (48.95 HP), empty load weight: 4,500 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,800 mm, Rigid telehandler Mast type: telescopic Condition: ready for operation and fully functional Technical condition: good Front tyres type: pneumatic Dusdszhdmzspfx Aitjw Front tyres condition: 80 - 100% Rear tyres type: pneumatic Rear tyres condition: 80 - 100% Description: MANITOU MT 625H Telescopic Loader (Model 625-49 Series 1E3) - 2.5 ton lifting capacity - 6m reach - Year of manufacture: 2015 - Approx. 3,500 operating hours (no reading on hour meter) - 2-speed hydrostatic drive - mechanical quick coupler - 4-cylinder KUBOTA diesel engine, 49 HP - 4-wheel steering - 4-wheel drive - 3 steering modes - 4,500 kg tare weight - Height: 1.9m - Width: 1.80m - Length: 4m - Without particulate filter - Good tyres approx. 80-90% - Includes used pallet forks - Very manoeuvrable loader - Telehandler in good condition - NEW BUCKET available at extra cost! - Inspection and test drive welcome - Incl. CE certificate and operator’s manual - Delivery possible. Quick coupler, 3rd valve, heating, full cab, CE certificate,

Condition: excellent (used), Year of construction: 2024, operating hours: 795 h, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, power: 54 kW (73.42 HP), motor manufacturer: Deutz, total height: 3,050 mm, total length: 3,500 mm, total width: 2,100 mm, color: other, Equipment: all wheel drive, General information Year of manufacture: May 2024 Registration number: T-67-GGD Technical information Number of cylinders: 4 Engine capacity: 2.925 cc Engine type: Deutz TCD 2.9 Empty weight: 6.230 kg Wheelbase: 200 cm Functional Lifting capacity: 3.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit Dusdpfxey Ityyo Aitsw - 4th Hydr. circuit - Beacon(s) - LED-lighting - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: France Condition Overhauled: × CE type: CE

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 2474368, load capacity: 408 kg, lifting height: 14,210 mm, platform length: 2,300 mm, platform width: 900 mm, overall weight: 7,500 kg, transport length: 7,090 mm, transport width: 2,380 mm, transport height: 2,470 mm, construction height: 2,940 mm, fuel type: diesel, tire size: 914 x 370 mm, color: red, Technical specifications Year of manufacture: 2015 Engine: Diesel Working height: 16.21 m Platform height: 14.21 m Platform dimensions: 2.30 m x 0.90 m Overall dimensions (L x W x H): 7.09 m x 2.38 m x 2.47 m Max. outreach: 8.52 m Dedjyqz Dkepfx Aiteuw Articulation point: 7.39 m Lifting capacity: 408 kg Superstructure rotation: 350° Work basket rotation: 90° Travel speed: 1 - 5 km/h Climbing ability: 45% Weight: 7,500 kg General signs of use, fully functional

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,490 kg, lifting height: 10,000 mm, mast type: telescopic, Year of construction: 2016, operating hours: 4,614 h, total length: 6,140 mm, free lift: 1,100 mm, construction height: 2,990 mm, fork length: 2,400 mm, fork carriage width: 2,480 mm, drive type: Diesel, load capacity: 13,000 kg, construction width: 2,510 mm, Rigid telescopic forklift Load center of gravity: 600 Fork width: 200 mm Fork thickness: 70 mm Dedpot Dd Hasfx Aiteuw ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostat Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Front tires Size: 17.5 R25 Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Size: 17.5 R25 Rear tires Condition: 60 - 80% Description: Full cab with heating and air conditioning, lighting similar to STVO, 3rd + 4th valve to fork carriage, joystick sideshift, fork positioner, Hydraulic sideshift Hydraulic fork tine adjustment (opening dimension inner edge - inner edge = 610 mm - 1,950 mm) 3rd valve, 4th valve, rear working lights, heating, soot filter, full cab, air conditioning, interior mirror, exterior mirror, joystick, windshield wiper, seat,

Condition: used, Year of construction: 2007, operating hours: 6,370 h, load capacity: 230 kg, fuel type: diesel, Equipment: all wheel drive, Empty weight: 8.090 kg GVW: 8.320 kg Dimensions (LxBxH): 577 x 230 x 237 cm Duedozdufmspfx Aitow Engine type: Perkins Perkins Mast: articulated arm Working height: 1.765 cm Boom radius: 10.6 m

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,500 kg, Accessories Dusdpfx Aezd H Nqsitow Condition: New Technical Condition: New Description: Manitou 180° Swivel Fork Carrier – More flexibility on every construction site. Welcome to today's product highlight: the Manitou 180° Swivel Fork Carrier. This intelligent attachment significantly expands the application possibilities of your Manitou telehandler and ensures maximum efficiency in handling pallets and long materials. The swivel fork carrier enables a 90-degree rotation to the left and 90 degrees to the right. This allows loads to be positioned precisely without constantly having to realign the machine. This is especially beneficial on tight construction sites, between buildings, or in hard-to-reach areas, as it saves valuable time and increases safety. Whether it's sandwich panels, drywall, wood, or steel structures – long loads can be easily transported lengthwise and placed exactly where they are needed. Even pallets that are not optimally aligned can be easily corrected. Another advantage: positioning materials through window openings or narrow passages becomes significantly easier. The driver does not have to constantly move the machine but can align the load directly using the rotating function of the fork carrier. This saves travel distances, reduces fuel consumption, and increases productivity on the construction site. With a load capacity of up to 1,500 kilograms, the Manitou Swivel Fork Carrier is suitable for most daily material transport tasks on construction sites and in industrial applications. Typical applications include roofing and facade work with sandwich panels, drywall construction, wood and steel construction, and all applications where long or bulky loads need to be moved safely. The Manitou 180° Swivel Fork Carrier offers a perfect combination of flexibility, precision, and productivity. Less maneuvering, faster workflows, and more efficient material logistics make it an indispensable tool for modern construction sites.

Condition: new, Year of construction: 2026, total length: 6,100 mm, Articulated telescopic work platform Manitou 150 AETJC Duodpfx Aszfq Dbsitew Drive Electric Year built 2026 Work height (mm) 15,000