Used Manitou Mt 625 Turbo for sale (569)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 7,097 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,900 mm, power: 55 kW (74.78 HP), empty load weight: 4,500 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Air Front tires condition: New Hfsdpfx Abozuh Nmsiek Rear tires type: Air Rear tires condition: 40 - 60% Description: MANITOU MT 625 telescopic loader (ST3B series) - - 2.5 tons lifting capacity - - - 6m reach - - - Year of manufacture 2015 - - - 7097 operating hours according to the meter - - - 2-speed hydrostatic transmission - - - mechanical quick coupler - - - 4-cylinder KUBOTA diesel engine TURBO 75 hp - - - 4-wheel steering - - - 4-wheel drive - - - 3 steering modes - - - 4500 kg operating weight - - - Overall height 1.9m - - Width 1.80m - - Length 4m - - - - Front tires NEW, rear tires approx. 50% - - - including used pallet forks - - - very maneuverable loader - - Telescopic forklift in good condition - - - NEW BUCKET available at an extra cost!! - - - Inspection and test drive possible - - including CE Declaration of Conformity + operating manual - - - Delivery possible. Quick coupler, 3rd valve, 4th valve, front work lights, heater, full cab, CE certificate.

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s Hfedpfxjztgl De Abijk ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: excellent (used), fuel type: diesel, color: other, first registration: 06/1999, Year of construction: 1999, operating hours: 5,001 h, Dutch Manitou MT 1337 SLT Turbo, with only 5,000 hours and pallet forks = More information = CE mark: yes Technical condition: very good Visual appearance: very good Registration number: TNR-76-N = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email: Hedpfxozuc Spj Abisfk

Condition: new, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 6,000 mm, total length: 5,090 mm, Kapazität Ausbrechkraft mit Schaufel 3770 daN Gewicht und Reifengröße Aufwärtsneigewinkel 12 ° Abwärtsneigewinkel 117 ° Wenderadius (über Räder) 3.31 m Hsdpjy Abf Tefx Abijfk Bereifung Aufblasbar Reifenmodelle CAMSO SKS532 12-16.5 Leistung Heben 11.10 s Senken 8 s Teleskop ausfahren 7.70 s Teleskop Einfahren 7.40 s Ankippen 4.45 s Auskippen 4.30 s Motor Max. Drehmoment 200 Nm Zugkraft 2090 daN Motor/Batterie Nennleistung des Elektromotors 40 kW Hydraulische-Motorleistung 30 kW Batterietechnologie Lithium-ion Batteriekapazität 348 Ah Batterieenergie 35 kWh Ladegerät Leistung / Phase / Stromtyp 3 kW / Single-phase / AC Elektrischer Schaltkreis Batterie / Batteriekapazität 100 V / 348 Ah 12V Batteriekapazität 74 Ah Getriebe Getriebetyp elektrisch Anzahl der Gänge (vorwärts / rückwärts) 1 / 1 Max. Fahrgeschwindigkeit 20 km/h Parkbremse Hydraulische Federentriegelung SAHR Festellbremse Hydraulisch Hydraulisch Typ Hydraulikpumpe Zahnradpumpe Hydraulikfördermenge / Hydraulikfördermenge – Hydraulikdruck 84 l/min-235 bar Tankkapazität Hydrauliköl 80 l Lärm und Vibrationen Geräuschpegel im Fahrerstand (LpA) 72 dB Umgebungsgeräusch (LwA) 92 dB Schwingungsbelastung Hand/Arm < 2.50 m/s² Sonstiges Lenkräder (vorne / hinten) 2 / 2 Antriebsräder (vorne / hinten) 2 / 2

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 95 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,960 mm, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift, rigid ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Condition: Like new Technical condition: Very good Hedpfx Ajzrcu Esbisfk Front tire type: Pneumatic Rear tire type: Pneumatic Rear tire condition: 80 - 100 % Rear work lights, front work lights, heater, full cabin, CE certificate, safety light, exterior mirrors, joystick, windshield wiper,

Condition: excellent (used), functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, lifting power: 2,500 kg/m, lifting height: 5,800 mm, Year of construction: 2015, operating hours: 5,060 h, Equipment: additional headlights, all wheel drive, cabin, pallet forks, trailer coupling, Telescopic handler MANITOU MT625H Year of manufacture: 2015 According to the meter, 5,060 hours 2.5 ton lifting capacity 5.8 meter lifting height 55.4 kW Kubota engine 2-stage hydrostatic transmission Only 1.81 meters wide Hedpfozl T Szjx Abiofk Only 1.92 meters high - Includes forks - Mechanical quick coupler - Additional circuit up to the fork carriage - Enclosed cab with heating - Lighting system with turn signals - All-wheel drive - 3 steering modes - Joystick control - Optically and technically in top condition! - Well-maintained machine! - Includes road approval for the Netherlands! - Includes all documents! Selling price: €32,900.00 net (including forks) New bucket or new work platform available for an additional charge! Affordable delivery also possible!

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 143 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 1,181 mm, Rigid telehandler Hfsdpsvgh Rfefx Abisk Technical condition: New Front tyres condition: 80 - 100% 3rd valve, rear work light, front work light, heater, solenoid valve, soot filter, full cab, CE certificate, engine heater, roof window wiper

Condition: excellent (used), functionality: fully functional, maximum load weight: 3,500 kg, lifting height: 14,000 mm, Year of construction: 2007, operating hours: 5,700 h, TELEHANDLER Manitou MT 1435 HSL Turbo Year 2007 Lifting height 14 meters Capacity 3.500 kg Working hours 5700 Diesel engine Hfjdpfx Aeyy R Npebiok Forks Regular documentation

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 470 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift rigid Load center of gravity: 500 Technical condition: very good Front tires type: pneumatic Hfedpfx Ajv Ntfyobiok Front tires size: 12-16.5 Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires size: 12-16.5 Rear tires condition: 80 - 100% Battery voltage: 12V Image serves as a symbol - Fork carrier - Interior rear view mirror - Radio antenna - Radio preparation - Info additional hydraulic function - JSM tilt function switch-off - Sun visor front roof window - Rear view mirror at the rear of the machine - Roof window wiper - Power cable 95mm - Engine heating - Diesel preheater - EU version - Easy Link STD module 3rd valve, rear work light, front work light, soot filter, full cabin, CE certificate,

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Hedpezgpbbsfx Abisfk Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovation work on low-rise buildings. The compact machine, 1.80 m wide and less than 2 m high, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy maneuverability. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and the telescope, thus increasing productivity. 3rd valve, full cab, CE certificate.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 15 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: electric, mast type: telescopic, construction height: 1,920 mm, power: 40 kW (54.38 HP), fork length: 1,200 mm, empty load weight: 4,755 kg, total length: 3,894 mm, drive type: Elektro, construction width: 1,813 mm, Telescopic forklift, rigid frame – Electric Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Non-marking Front tire condition: 80 – 100% Rear tire type: Non-marking Rear tire condition: 80 – 100% Battery voltage: 100V Battery capacity: 348Ah Hsdpfxjzif N Hj Abiefk Battery manufacturer: Manitou Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: 80 – 100% Description: Manitou telescopic handler 625, 100% electric. The first 100% electric Manitou telescopic forklift, specifically designed for use in the construction industry! A compact, versatile machine for all your material handling applications, which is quiet and emission-free without compromising on performance. With a lifting height of 5.85 m, a load capacity of 2.5 t, a ground clearance of 33 cm, combined hydraulic movements, and compact dimensions, the MT 625 e is a true off-road machine, also suitable for work on compact, low-emission construction sites, such as in city centers or indoors. Equipped with lithium-ion batteries and an integrated charger, you can add an additional battery and charger to increase on-site autonomy and charge your equipment faster. 3rd valve, work lights rear, work lights front, heater, full cab, air conditioning

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Hfjdpfx Abjzif N Tjiek Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovations on low-rise buildings. The compact machine, with a width of 1.80 m and a height of less than 2 m, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy handling. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine compartment. The 90 l gear pump enables simultaneous movements of the boom and the telescope, thus providing an increase in productivity. 3rd valve, full cab, air conditioning, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,212 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 2,054 mm, fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic forklift, rigid frame Load center: 500 ISO class: Pin-type Mast type: Telescopic Transmission: Hydrostatic drive Condition: Ready for use and fully functional Hjdpjzqhr Tsfx Abiefk Technical condition: very good Front tire size: 12-16.5 Rear tire size: 12-16.5 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and meets FEM 4.004 standards. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available on request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. 3rd valve, 4th valve, rear work light, front work light, heater, load guard, soot filter, full cab, full free lift, interior mirror, exterior mirror, joystick, windshield wiper, single-pedal control, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 660 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic forklift, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% 3rd valve, full cabin Hfjdpozkwvcjfx Abiok

Condition: new, functionality: fully functional, machine/vehicle number: HR15272, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 56 kW (76.14 HP), fork length: 1,200 mm, empty load weight: 4,800 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic handler, rigid frame Chassis number: HR15272 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: CAMSO SKS532 1216.5 145A2 Front tire condition: New Rear tire type: Pneumatic Rear tire size: CAMSO SKS532 1216.5 145A2 Rear tire condition: New Battery voltage: 12V Battery capacity: 110Ah Battery type: Starter Battery year of manufacture: 2026 Battery condition: New Description: Machine completely workshop-tested, UVV and inspection newly approved! Rear work light, front work light, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, CE certificate, interior mirror, exterior mirror, joystick, windshield wiper, LED, seat, Fork carriage with load guard (PFB), forks 125 x 45 x 1,200 mm (FEM 2), Camso SKS532 tires 12-16.5, interior rearview mirror, rear-mounted mirror, radio antenna, radio preparation, auxiliary hydraulics, deactivation of tilt function, LED work lights front and rear, sun visors on the roof and windshield, roof windshield wiper, high-performance starter battery 12V / 110 Ah / 900 A, power cable 95 mm², protection for lubrication points, Easy Link System, CE machine approval and ABE (German operating permit) for Germany, TÜV version (German technical inspection) 20 km/h. Hfjdezf Tfhjpfx Abiek

Condition: new, Year of construction: 2025, Equipment: all wheel drive, soot filter, Manitou MT625 H Comfort 75K ST5 S1 Telehandler 2.5t 6m The MT 625 H telehandler is designed for construction site applications in new building projects as well as renovation work on low-rise structures. This compact machine, just 1.80 m wide and under 2 m in height, easily fits through doorways and can navigate congested job sites with ease. Its turning radius of 3.30 m and three steering modes ensure outstanding maneuverability. The telehandler is user-friendly, equipped with an ergonomic dashboard and the JSM joystick for precise and simple operation. The MT 625 H offers a lifting capacity of 2.5 t and a maximum lift height of 5.85 m. Its 75 hp engine provides a top speed of 25 km/h. Maintenance tasks are simplified by the wide engine bonnet opening. The high-capacity 90-l gear pump enables simultaneous movement of the boom and telescope, enhancing productivity. Max. load capacity: 2,500 kg Max. lift height: 5.85 m Max. reach: 3.40 m Breakout force with bucket: 3,427 daN Overall length with fork carriage: 3.83 m Length to front of forks: 3.90 m Overall width: 1.81 m Overall height: 1.92 m Wheelbase: 2.30 m Ground clearance: 0.33 m Cabin width: 0.79 m Upward tilt angle: 12° Downward tilt angle: 117° Turning radius (over tyres): 3.31 m Weight: 4,800 kg Tyres: SKS532 12-16.5 Engine: Kubota Stage V, Tier 4 final Engine model: V3307-CR-TE5B Number of cylinders/displacement: 4 - 3,331 cm³ Engine power (hp/kW): 75 hp / 55.40 kW Max. torque / engine speed: 265 Nm @ 1,400 rpm Tractive force: 3,550 daN Transmission type: Hydrostatic Number of gears (forward/reverse): 2 / 2 Max. travel speed: 20 km/h Automatic negative parking brake Parking brake: oil-immersed disc brakes on front axle Hydraulic pump type: gear pump Hydraulic flow/pressure: 90 l/min - 235 bar Hydraulic oil capacity: 115 l Fuel tank capacity: 63 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Hfodsxmqt Ejpfx Abisk Errors and prior sale excepted. Internal vehicle number: R122 WhatsApp support available! If you have any questions about the vehicle or would like more information, feel free to message us on WhatsApp. WhatsApp WhatsApp

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 935 h, load capacity: 2,526 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,830 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift, rigid frame Speed class: 25 Hedpfx Aswlxh Robiefk Technical condition: good Description: The Manitou MT 625 is a versatile telescopic handler for construction sites, agriculture, and lifting and material handling tasks. With a lifting height of up to 5.85 m, a lifting capacity of 2,500 kg, and all-wheel drive, this machine is ideally suited for working on uneven terrain and in confined spaces. Narrow design for tight access and indoor use. High maneuverability and off-road capability. Robust, powerful, and easy to operate. For more information and a non-binding inquiry, please visit our website – Safe operation at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-to-own, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with expert and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 987 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,900 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic handler, rigid frame Hsdpfjwlxh Dsx Abiofk Speed class: 25 Technical condition: good Description: The Manitou MT 625 is a versatile telescopic handler for construction sites, agriculture, as well as lifting and material handling tasks. With a lifting height of up to 5.85 m, a lifting capacity of 2,500 kg, and all-wheel drive, this machine is ideal for work on uneven terrain and in confined spaces. Narrow design for tight access and indoor use. High maneuverability and off-road capability. Robust, powerful, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. You can get everything you need from a single source. We also offer lease-purchase options, financing, and the purchase of used machines. Our team will be happy to provide you with expert and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, power: 75 kW (101.97 HP), empty load weight: 4,800 kg, total length: 3,900 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift, rigid frame Speed class: 25 Technical condition: very good Description: The Manitou MT 625 is a versatile telescopic handler for construction sites, agriculture, as well as lifting and material handling tasks. With a lifting height of up to 5.85 m, a lifting capacity of 2,500 kg, and all-wheel drive, this machine is ideal for working on uneven terrain and in confined spaces. Narrow design for tight access and indoor use. High maneuverability and off-road capability. Robust, powerful, and easy to operate. Further information and a non-binding inquiry can be found on our website – safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice. Hedpfeyrvwuox Abiefk

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 50 h, load capacity: 3,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,997 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 6,550 kg, total length: 4,679 mm, drive type: Diesel, construction width: 1,990 mm, Telescopic forklift, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Hfedozttmhepfx Abisk Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 380/75 R20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 380/75 R20 Rear tire condition: 80 - 100% 3. Valve, front work light, heater, full cab.

Condition: used, Year of construction: 2021, load capacity: 3,300 kg, lifting height: 6,900 mm, fork length: 1,200 mm, total length: 6,000 mm, - Max. Tragkraft 3300 kg - Max. Hubhöhe 6,90 m - Max. Auslage 3,90 m - Ausbrechkraft mit Schaufel 5770 daN - Kippwinkel 12° - Schüttwinkel 114° - Wenderadius (über Räder) 3,80 m - Heben 8,3s - Senken 6s - Teleskop ausfahren 7,30s Hfodpoxd Hqbofx Abiek - Teleskop einfahren 4,50s - Ankippen 3,40s - Auskippen 2,80s - Motor Hersteller: Deutz - Motornorm: Stage 5/Tier iV Final - Motor Modell TD 3,6l - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4-3621 cm³ - Nennleistung Verbrennungsmotor - Leistung kW 75Hp / 55,4 kW - Max. Drehmoment / Motordrehzahl 340 Nm @ 1600 rpm - Zugkraft 8360 daN - Typ: Drehmomentwandler - Anzahl der Gänge (vorwärts/rückwärts) 4/4 - Max. travel speed 24,90 km/h - Parkbremse Handbuch - Feststellbremse - Hersteller der Achsen: Dana - Pumpenart: Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 92,70 l/min / 260 Bar - Motoröl: 10 l - Hydrauliköl: 128 l - Fassungsvermögen des Kraftstofftanks: 120 l - Geräuschpegel im Fahrerstand (LpA): 79 dB(A) - Umgebungsgeräusch (LwA) 104 dB(A) - Schwingungsbelastung Hand/Arm:

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 7,350 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,755 mm, power: 38 kW (51.67 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 5,500 kg, total length: 4,080 mm, drive type: Diesel, construction width: 1,323 mm, All-terrain forklift Load center: 500 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic Speed class: 20 km/h Condition: Refurbished, without warranty Technical condition: Good Front tires type: Pneumatic Front tires condition: 60 - 80% Rear tires type: Pneumatic Hedpfxjy A T H Ae Abiofk Rear tires size: 700x12 14PR Continental Rear tires condition: 80 - 100% Description: The MSI 30 is a versatile mast forklift, unique in its class. It can be used in the wood and paper industries, recycling sector, logistics applications, and more. Whether indoors, in the yard, or on light terrain, the hydrostatic transmission combined with a powerful engine and two large-diameter drive wheels enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 features a steering axle with an integrated cylinder for a very tight turning radius. With a wide range of available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It offers a lifting capacity of 3.0 t. Side shifter 3rd valve Rear work light Front work light Semi-cab Street legal (StVZO) Beacon Windscreen wiper

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,390 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Mast type: telescopic Speed class: 20 Hfsdpfoyfivksx Abisk Technical condition: good Front tyres type: pneumatic Front tyres size: 500/80-24 Front tyres condition: 80–100% Rear tyres type: pneumatic Rear tyres size: 500/80-24 Rear tyres condition: 80–100% 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 55 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,980 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Rigid telescopic forklift Load center of gravity: 500 Mast type: Telescopic Transmission: Hydrostat Speed class: 20 Technical condition: very good Hedpfxjvf R D Ej Abijfk Front tires Type: Pneumatic Front tires Size: 400-55 R17.5 149A8 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400-55 R17.5 149A8 Rear tires Condition: 80 - 100% Description: The MLT 625-75 H telehandler is a very compact machine. It was specially designed for agricultural applications and helps you with all daily tasks on your farm. Its very compact dimensions guarantee unsurpassed maneuverability and make it possible to get into buildings and tight areas. The comfort of the cab, the soundproofing (max. 76 dB), the 360° all-round visibility and the JSM (Joystick Switch & Move) guarantee long working days in complete safety with a minimum of fatigue. The Easy Connect System (ECS) makes it easy to change attachments on the boom head, and the large number of compatible attachments provides the versatility you need for your operation. The hydraulic movements are precise and smooth, and the 4 drive and steering wheels, which can be used in 3 different steering modes, allow you to react to any situation. 3rd valve, rear working lights, front working lights, heating, STVZO, full cab, CE certificate, interior mirror, exterior mirror, rotating beacon, windshield wiper, Brief description and equipment:-Pack Classic-Quick drain device for engine oil-Diesel preheater-Full cab with heating-Mechanical Grammer textile seat -Sun visor for front and roof window-Inside rear-view mirror-Car radio-Phone holder-Working lights for front left and right-Working lights for rear left and right-Mirrors at the rear of the machine-Roof window wiper-Auxiliary hydraulics double-acting on the telescopic boom-Fork carriage-Fork tines 1200mm- CE declaration

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 660 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,500 mm, power: 74 kW (100.61 HP), fork length: 1,200 mm, empty load weight: 11,300 kg, total length: 6,270 mm, drive type: Diesel, construction width: 2,420 mm, Telescopic handler rigid Load centre: 500 Mast type: telescopic Transmission: torque converter Speed category: 20 Condition: as new Technical condition: very good Front tyres type: pneumatic Front tyres size: 24 Front tyres condition: 80 - 100% Rear tyres type: pneumatic Rear tyres size: 24 Rear tyres condition: 80 - 100% Description: Incl. basket control – radio control Hfedsxlvfkjpfx Abiok 3rd valve, rear work lights, front work lights, heater, full cab, air conditioning.