Used Knikmops Km 80 for sale (59,114)

Condition: reconditioned (used), machine/vehicle number: 26082, Year of construction: 2017, operating hours: 5,147 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric trucks (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift Truck Data Manufacturer: Jungheinrich Type: Jungheinrich ERE 225 - Electric Pallet Truck Drive type: Electric Capacity: 2,500 kg Deb Hbltswdpy Iszscg Year of manufacture: 2017 Operating hours: 5,147 Lift height: 122 mm Overall height: 1,400 mm Fork length: 2,150 mm Weight: 930 kg Battery capacity C5: 80% (report included with delivery) Front tires: Polyurethane Rear tires: Polyurethane Charger: upon request

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Dceb Hbewc Nvgeltzsg Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, BETA 80-ZRS-32AT5-E-220-550-970-AK-4BL-1, HSB linear actuator - New Model: BETA 80-ZRS-32AT5-E-220-550-970-AK-4BL-1 Condition: New Dceb Hbeq S Stpoltzog

Condition: used, mileage: 187,385 km, power: 184 kW (250.17 HP), first registration: 06/2013, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, sleeping cabin, trailer coupling, = Additional options and accessories = - Air suspension - Disc brakes - Electrically adjustable exterior mirrors - Electric windows - Fog lights - Gullet - High Beams - Power steering - PTO - Radio - Sleeping cabin Dcsb Hsvq Nqhjbltzog - Speed limiter - Toolbox = Remarks = DAF CF 65-250, 2013, Euro 5 EEV, 187350 km!, Manual transmission, 20 meter aerial platform (1995) all documents and tests available! = More information = Front axle: Steering Rear axle: Double wheels GVW: 18.000 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), 1 x aluminium silo with long standing frame + filter house, ø 3,000 mm designed for a specific weight of 1.2 kg/ dm³ Manufacturer: Zeppelin capacity: approx. 80.000 ltr. diameter: approx. 3.000 mm total height: approx. 15.590 mm Dcjb Hbltjgig D Dezsg Weight: approx. 2.000 kg Specific weight: 1.2 Connections and joints: On the top floor: 1 x roof edge railing (ø 3,000 x 1,200 mm) 1 x folding dome with protective grating DN 600 1 x access ladder to the filter house 2 x crane eyes In the filter house: 1 x flange DN 100 for filling line 6 x air vent DN 600 with filter bag 3 x connection for control/measurement technology in the jacket: 1 x aeration grid (filter house) 1 x filling pipe DN 98 1 x access door Silo ends in a 60° cone NW 1500 with inspection opening. The standing frame is insulated on the inside. Silo has a single ladder with back protection (starting at a height of approx. 4 m).

Condition: new, Year of construction: 2025, Functionality: fully functional, warranty duration: 24 months, DGUV certified until: 06/2027, Planetary Mixer Model: Planeto 80 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Safety guard/safety grid with protective circuit Mixer with tools: Dcsb Hblju Amdastzeg 1 whisk, 1 dough hook, 1 flat beater 1 80-liter stainless steel bowl Electric bowl lift DGUV V3 tested Connection: 400V, 4.5 kW, 16A-CEE plug Dimensions: 720 x 1050 x 1660 mm, W x D x H New machine 24-month warranty + spare parts service Optional: 1 bowl trolley Maintenance contract Instruction & commissioning with a master baker Service package Leasing & rental service TOP quality and price in one machine! Your partner with added service!

Condition: reconditioned (used), machine/vehicle number: 27871, Year of construction: 2018, operating hours: 1,443 h, FRIEDMANN FORKLFITS - REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION AND KNOW-HOW. Used industrial trucks from selected premium manufacturers from us fully serviced, tested and and reconditioned according to FEM-4.004 (UVV) Specifications. Over 350 vehicles in stock Individual conversions of any kind possible on customer request. International transportation with suitable vehicles and customs clearance possible on request. See for yourself and visit us at our factory. Friedmann Forklifts - Our quality promise Dcsb Hju T Su Njbltzjg Full functionality according to FEM-4.004 Maintained & tested (C5 test) battery for electrical appliances (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lifting frame, fork carriage, attachments and hydraulic system, hoses tested Steering axle checked for safety Forks and lifting chains tested Driver's seat and seat belt as good as new New paintwork in original colors and original stickers Industrial truck data Manufacturer: Jungheinrich Type: Jungheinrich EJE C20 - Electric low lift pallet truck Drive type: Electric Load capacity: 2,000 kg Year of construction: 2018 Operating hours: 1.443 Lifting height: 750 mm Mast type: - Overall height: 1,300 mm Fork length: 1,150 mm Dead weight: 583 kg Load center of gravity: 600 mm Battery capacity C5: 80% (protocol is enclosed with the delivery) Attachments: - Special equipment: - Front tires: Polyurethane Rear tires: Polyurethane Charger: on request

Condition: new, Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 15Bending capacity: (Runde Rohre) 114 x 8pressure: 80working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA Dcob Hber I H Dcjltzog horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Dob Hbowcmb Holtzocg Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), first registration: 04/2008, color: grey, Year of construction: 2008, Equipment: ABS, = Further options and accessories = - Air suspension = Remarks = Iveco Eurocargo tractor own weight 3955kg Totall weight 7490 kg with Heinemann 2 axle Lowloader own weight 3500 kg Totallweight 14500 kg Euro5 engine Only 107907km German registration Valid Inspection till 6-2025 Dcebewg A Epo Hbltzjg = Further information = General information Odometer reading: 107,907 km Cab: Day Technical information Power: 162 kW (220 HP) Fuel type: Diesel Gearbox: 6 gears, manual Dimensions Dimensions (L x W): 1080 x 255 cm Weights Empty weight: 3,500 kg Payload: 11,000 kg GVW: 14,500 kg Environment Emission class: Euro 5 Maintenance, history and condition APK (technical main inspection): checked until 06.2025 Technical condition: very good Visual condition: very good Further information Contact Gerrit Haverhoek for more information.

Year of construction: 2008, Condition: ready for operation (used), Control Unit Debewd Uyye Hbltzocg Brand HEIDENHAIN Model TNC426 Main Drive Spindle speed range 3500 Tool taper 50 ISO Movement X-Axis Movement 1600 mm Y-Axis Movement 920 mm Z-Axis Movement 950 mm Table Outer length 850 mm (extends to 1600 mm with supports) Outer width 850 mm Table load 3000 kg (5000 kg with supports) Media Chip conveyor Yes This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Application Types Other Machine Tools

Condition: used, mileage: 597,000 km, power: 320 kW (435.08 HP), first registration: 03/2016, overall weight: 27,000 kg, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, navigation system, soot filter, Information in German Further options and accessories * 27 MC / CB * Aluminum fuel tank * Roof spoiler * Electric windows * Electrically adjustable exterior mirrors * Homepage * Air conditioning * Refrigerator * Air suspension * Air horns * Fog lights * Parabolic suspension * Particulate filter * Radio/CD player * SemCollection * SemStars * Side skirts * Spoiler * Central locking Further information General information Cabin: Sleeper cab License number: 91-BGX-3 Transmission Transmission: Automatic Axle configuration Axle brand: Bridgestone Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5, Max. axle load: 8000 kg, Steered, Left tire profile: 30%, Right tire profile: 30% Rear axle 1: Tire size: 385/55 R22.5, lift axle, max. axle load: 7500 kg, steered, left tire profile: 50%, right tire profile: 50% Rear axle 2: Tire size: 315/70 R22.5, dual tires, differential lock, max. axle load: 11500 kg, left tire profile inside: 80%, left tire profile outside: 80%, right tire profile inside: 80%, right tire profile outside: 80%, reduction: single reduction Dimensions and weights Payload: 18,235 kg Dimensions (L x W x H): 631 x 255 x 400 cm Wheelbase: 395 cm Maintenance General technical inspection (MOT): New MOT upon delivery Condition General condition: very good Technical condition: very good Visual condition: very good----Information in the Netherlands Awesome options and accessories * Air conditioning * Aluminum fuel tank * Centrale deurvergrendeling * Dakspoiler * Electrically operated ramen * Electrically adjustable side mirrors * Gestuurde voorloopas * Home page * Koelkast * Luchthoorns * Air reduction * Crap lamps * Paraboolvering * Radio/CD player * Red filter * SemCollection * SemStars * Sideskirts * Spoilers * Standing tile with block warming * Zendapparatuur / 27MC Sea information General information Cabin: sleep Kenteken: 91-BGX-3 Transmission Transmission: automat Asconfiguration Note: Bridgestone Remmen: schijfremmen Vooras: Gang mate: 385/65 R22.5, Max. aslast: 8000 kg, Measuring end, Gang profile left: 30%, Gang profile right: 30% Achteras 1: Gang mate: 385/55 R22.5, Liftas, Max. aslast: 7500 kg, Meesturend, Gang profile left: 50%, Gang profile right: 50% Achteras 2: Gang mate: 315/70 R22.5, Double light, Differential slot, Max. aslast: 11500 kg, Gang profile left inside: 80%, Gang profile left side: 80%, Gang profile right inside: 80%, Gang profile Rechtsbuiten: 80%, Reductie: enkelvoudige reductie Maten and weight Load capacity: 18,235 kg Afmetingen (LxWxH): 631 x 255 x 400 cm Wheel base: 395 cm Onderhoud APK: Nieuwe APK bij aflevering Djb Hbewgupyeltzocg State General state: zeer goed Technical state: zeer goed Optical state: zeer goed Requirements information SEMTRADE TRUCKS & TRAILERS Transport route 21a 2676LM Maasdijk / Follow us on Facebook:

Condition: good (used), machine/vehicle number: 26642, Year of construction: 2017, operating hours: 9,804 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Dcjb Hbltsug Iy Ijzeg Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric devices (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Type: Jungheinrich ERC 214 - Fixed-platform pallet stacker Drive type: Electric Capacity: 1,400 kg Year of manufacture: 2017 Operating hours: 9,804 Lift height: 2,900 mm Mast type: Duplex Height: 1,900 mm Fork length: 1,150 mm Terrain weight: 1,120 kg Load center: 500 mm Battery capacity C5: 80% (report included with delivery) Front tires: Polyurethane Rear tires: Polyurethane Charger: upon request

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S / Hybrid machine / Operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping platens: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touch screen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Control unit with hot runners Hardened injection unit - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine was purchased from the first owner in October 2016 There is an option to purchase an additional Krauss Maffei hot runner controller, 24 hot zones, for an additional charge Robot Sepro Industrial Robot SDR 22S Year of construction: 2019 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 8200 kg Dcsbjwcmzyj Hbltzjg Length/width/height: 5.00x1.60x2.10 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), mileage: 107,907 km, power: 162 kW (220.26 HP), first registration: 04/2008, fuel type: diesel, color: red, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, spoiler, = More options and accessories = - Roof spoiler - Speed limiter - Fog lights = Remarks = Iveco Eurocargo tractor own weight 3955kg Totall weight 7490 kg with Heinemann 2 axle Lowloader own weight 3500 kg Totallweight 14500 kg Euro5 engine Only 107907km German registration Valid Inspection till 6-2025 = More information = Gearbox: 6 gears, manual gearbox Empty weight: 3,955 kg Payload: 3,535 kg GVW: 7,490 kg APK (main technical inspection): inspected until 06.2025 Technical condition: very good Visual condition: very good Deb Hbltowg A Eiszscg Contact Gerrit Haverhoek for more information.

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Dcob Hbltewcmbtezsg Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), mileage: 95,869 km, power: 324 kW (440.52 HP), fuel type: diesel, color: white, axle configuration: 6x4, fuel: diesel, wheelbase: 5,100 mm, driver cabin: day cab, emission class: euro4, suspension: steel, loading space width: 2,470 mm, loading space length: 7,240 mm, Year of construction: 2009, Equipment: ABS, crane, cruise control, differential lock, trailer coupling, = Further options and accessories = - Aluminium fuel tank - Leaf spring suspension - Fog lights - Power take-off (PTO) - Tow bar = Remarks = Deb Hbltjwg A Anszecg Mercedes 2644 6x4 Only 95869 KM Steelsuspension, EPS gearbox, Wheelbase 5.10m, Platform 7.24 long, Crane Fassi F190 -3, Remote Controll Top Condition !!! = Further information = General information Year of manufacture: 2009 Technical information Number of cylinders: 6 GVW: 26,000 kg Gearbox Gearbox: 16 gears Axle configuration Suspension: Leaf spring suspension Front axle: Steered; Tire profile left: 70%; Tire profile right: 70% Rear axle 1: Dual tires; Differential lock; Tire profile left inside: 70%; Tire profile left outside: 70%; Tire profile right inside: 70%; Tire profile right outside: 70%; Reduction: planetary axles Rear axle 2: Double tires; Differential lock; Tire profile left inside: 60%; Tire profile left outside: 60%; Tire profile right inside: 60%; Tire profile right outside: 60%; Reduction: planetary axles Functional Lifting capacity: 8,325 kg Lifting height: 1,010 cm Crane: Fassi F190 - 3 remote controll, year of manufacture 2008, rear of the chassis Brand of bodywork: Dorgler Condition Technical condition: very good Visual condition: very good More information Contact Gerrit Haverhoek for more information.

Condition: excellent (used), Year of construction: 1997, Boy 80 M Year of manufacture: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Injection pressure: 2085 bar Dcjb Hblewcmbgetzsg Metering volume: 147.6 ccm Clamping unit : clamping force: 80 t tie bar distance: 410x358 mm size of clamping platens: 680x555 mm ejector: hydraulic clamping unit: toggle lever Control system: Procan CT Additional equipment: * Dimensions: Weight: 3200 kg Length/width/height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating power: 10,4 kW Total power: 25,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 30,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Control system with hot runners Hardened injection unit - bimetal Main machine motor - Servomotor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Debswcm Dhj Hbltzscg Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-80 / Electric machine Year of manufacture: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Injection pressure: 1580 bar Metering volume: 44 ccm Clamping unit: Clamping force: 50 t tie bar distance: 370x370 mm size of clamping platens: 520x570 mm ejector: electric clamping unit: toggle lever control: NC5 - touch screen Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface Air valve x 4 Control with hot runners Dcjbowcmbyo Hbltzjg Injection unit hardened - bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/width/height: 4.20x1.26x1.84 m Drive: Heating power: 5.7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm Dcsbowcmcqe Hbltzog injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dcsb Hjwcm Awjbltzsg Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 200-750 CX with the Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit: Clamping force: 200 t Distance between tie bars: 560x560 mm Size of the clamping platens: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touch screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Dceb Hbltjwcmztozjg Euromap 67 Robot interface Min. tool installation height - 350 mm Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners x 24 Hardened injection unit - bimetal Parallel movements Proportional valve on the injection unit - Precise injection Kistler sensor - mold pressure control Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 High-speed robot 5-axis robot: 3 axes are driven by servomotors (electric); axes B and C - pneumatic Touch control panel Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 11500 kg Length/width/height: 5.32x1.98x2.06 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Dsb Hjwcm Dujbltzecg The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 110-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Dcjb Hswcm Elebltzjg Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request