Used Knikmops Km130 Te for sale (136,050)

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 2308-4210, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,020 mm, rapid traverse X-axis: 4,166 m/min, rapid traverse Y-axis: 4,166 m/min, rapid traverse Z-axis: 1,666 m/min, nominal power (apparent): 10 kVA, controller manufacturer: Volter, workpiece height (max.): 160 mm, total height: 2,140 mm, total length: 1,770 mm, total width: 1,940 mm, table width: 1,200 mm, table length: 1,020 mm, overall weight: 600 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 7, type of input current: three-phase, Brand new Volter SX. It has not been used. It can machine both aluminum and wood and other soft materials. It does not have liquid cooling in the tools. Csbu Ssvx N S Usaa Djrb

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. Crjboth Taaou Saa Djb 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm Crsbu Saaoghgqao Deb 5 x 5 blade rotor (offset) 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: used, Year of construction: 2007, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Crebu Sewdgq Rsaa Deb Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Plymovent / Euromate Model: SCS Year of production - 2007 Cartridge filter inserts - 2 pcs Filtration surface 150 m2 Fan in a sound-absorbing enclosure with a noise silencer with a power of 7.5 kW. Fan model: CHB16LG03 Built-in frequency converter Efficiency up to 9000 m3/h Inlet diameter - 400 mm Filtration efficiency - 99.8 % Contamination container - 100 liters Includes noise silencer and electrical documentation. Stock no.: 0842

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, The EFI VUTEk GS3lx Pro LED printer, featuring UltraFX Technology, will help perfect your POP business. It’s designed for high production throughput, higher volumes, and shorter lead times while maintaining image quality. And you get the versatility to support the widest range of media and applications. 8 colors + white In production Installation in Europe available upon request. Productivity • Express Mode – 3,400 ft2 (318 m2) per hour - Production up to 94 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour Crebu Saasv H Dyve Deb • Production Mode – 2,300 ft2 (215 m2) per hour - Production up to 64 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour For further technical information please refer to attached brochure

Condition: used, Bohreraufnahme : Zweibackenfutter Drehzahlen : 2840 U/min Crebu Sasucamxea Deb Bedienung : Zweihand Betätigung der Höhenverstellung : manuell Ablesen der Höhenverstellung : Skala Spannzylinder : 1 Stk Spannzylinderbetätigung : Handexzenter Motorleistung : 2 PS

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 0378209, Teca-Print TPX250-1 incl. system plate - fully functional Crobu Saeuhna Rsa Dob - can be inspected in operation

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, roll diameter: 50 mm, roll width: 410 mm, total width: 490 mm, total length: 3,480 mm, Interroll RM 8110_R_Straight Motorized Roller Conveyor Total length: 3480 mm Roller width: 410 mm Total length: 490 mm Roller diameter: 50 mm Crebu Sajv T Dtioa Dob We offer more than 100 meters of roller conveyors from Interroll – in various lengths, with or without motors, curves, adjustable legs, access flaps, inclined infeed, transfer...

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Cjbu Sjghgnxeaa Djrb Rotor width: 140 mm 10 rotor blades 2 rows of stator blades Inlet cross-section approx. 250 x 300 mm Drive motor: 5.5 kW

Condition: excellent (used), - Automatic divider 10 rectangular divisions - Automatic discharge belt - Slide kit below - Divider dimensions: 605x655x1095mm - Model: SRA: 10 - Tank dimensions: 408x326x75mm - Weight: 300g-1.6kg - Tank capacity 16kg - Hourly capacity: 900 p/h - Voltage: 400V - Power: 1.5kw - Weight: 205kg - The automatic divider is a machine that allows you to cut a piece of raw dough into different parts, including large ones, of identical shape and weight depending on the model Leyovvk Tzj Tdwh Ssrk - Insert the product into the tank Cjbu Saasvvk Tzo Djrb - Set the working times (pressing and cutting) - Close the lid - The machine presses and cuts automatically - Automatic opening of the lid - Remove the cut dough pieces

Condition: used, Year of construction: 2008, Double-head elumatec DG 142 for cutting PVC profiles. Control electronics E555. Options: Vacuum cleaners, short-length stop, profile lifters, rollers on the moving head 1.5 meters. The machine has been completely renovated! In operation and ready for production! Cobevxbcxou Saa Dorb

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 22-2941, total width: 700 mm, total length: 800 mm, total height: 1,700 mm, empty load weight: 40 kg, Equipment: documentation/manual, Hello, for sale is a dispensing system for 2K liquid silicone rubber (LSR) for 20 l containers. This is a demonstration unit. Crebu Saajv T Ii Ue Deb A material feeder and a color dispensing unit are included. Truck loading is guaranteed.

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 11 kW (14.96 HP), Equipment: documentation/manual, 3 Teka Pusch Pull fume extraction units for sale. The three units are sold together. Price 14400Eur, net. The units are equipped with Easy-Cleain-Plus filter cartridges. They were used in a welding plant with an area of 800 sq m from 2017 to 2020. Due to a change of activity, the 3 units are for sale together with the installed network. The units can be viewed after consultation in operational condition. The Push Pull system is excellent for cleaning the air in halls where local extraction is not sufficient for some reason or has a negative impact on productivity. The suction openings are placed at a height of approx. 5-6 meters, and the cleaned air is returned to the opposite side of the hall. The system collects and filters harmful substances on the suction branch, and the cleaned air is returned to the space on the pressure branch. It is possible to inhale fresh air on the suction line. Csbu Set A Uiijaa Dorb Filter equipment: TEKA FILTERCUBE 4H – 11 kW (3DB) Fixed installation extractor and cartridge separator with automatic filter cleaning. The used “Easy Clean+ ” cartridges are provided with a protective layer (“precoat”) during production, which ensures surface filtration, thus high (>99%) filtration efficiency (BIA M filter class) and a long service life. Automatic pulse cleaning is ensured by built-in membrane valves and the microprocessor “Pulse Control” control, which is easy to operate and programmable according to the current requirements. Dirt accumulated on the surface of the filters leads to an increase in the pressure difference (constantly monitored before and after the filters). The control starts the pulse cleaning when the preset value is reached. The dirt thrown off by each pulse falls into the dust container, which must be emptied periodically. The cleaning pulses can be activated either by timing or manually. The text display shows the current operating status (pressure drop, operating hours, date, etc.). Technical data FC 4H 11kW: Pre-filter: perforated baffle Filter area [m²]: 100 (4 cartridges 25m²) Filter cartridge: BIA M Control: Pulse-Control Current consumption [A]: 0.3 Fan capacity [m³/h]: 8,000 (at operating point) Pressure [Pa]: 2,500 (at operating point) Motor power [kW]: 11 Power supply [V/Hz]: 400/50 Current consumption [A]: 22.5 Motor control: Star-Delta connection Noise level [dB(A)]: approx. 78 Intake port: Ø400mm on the left Exhaust port: Ø450mm on the right Dimensions (WxDxH) [mm]: Approx. 800 x 800 x 2920 Floor area of the Filtercube 4H extraction units: 800x800mm)  Each device is IFA (BGIA) certified in accordance with DIN EN ISO 15012-1. The biggest advantage of the Push Pull system is that it works unnoticed, without the need for workers, thus having a positive effect on productivity. The filter cartridges are cleaned using the microprocessor CONTROL UNIT2 control and the special POWER-SPRÜH system. CONTROL UNIT2 filter control The microprocessor CONTROL UNIT2 filter control can be monitored via a plain text display. This control monitors all operations of the extraction and filtration unit. It determines the amount of compressed air required for cleaning, based on this the air volume can be adjusted and the control can be changed manually or even depending on the pressure difference and time. There is also a possibility to remotely indicate the filter status. The control is connected to the operating hour counter and a clock.

Year of construction: 2018, Condition: good (used), Max temperature: 40° Celcius Min. temperature: 5° Celcius Volume Tank: 260 Liter Pump flow: 192 Ltr/min. Pump pressure: 405 kPa Refrigerant: R407C Motor power: 21 kW Country of origin: Belgium Machine weight: 435 kg Crobu Saewavt Hoa Deb

Condition: used, machine/vehicle number: 10460, 5-blade rotor 2 rows of stator blades Rotor diameter 400 mm Working width 600 mm Crsbu Saeghgg Usa Dob Inlet cross-section approx. 500 x 600 mm

Condition: excellent (used), -Dimensions:960x1740x2700mm Cebuouwdmhj Saa Dorb -N°série:930000010611 -Year:12/2013 -Voltage:400V -Power:2.2kw -Weight:1730kg Revised material:The material will be prepared when it is ordered. Pick up and return deadlines will be arranged at that time ( please ask for price after refurbishment ).

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Crobu Saswf Hdgja Djb Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: used, Year of construction: 2001, power: 75 kW (101.97 HP), 6-strand log feeder WD GDZ 76/71 600 stroke frame saw Year: 1989 Cebu Sjwc Ni Teaa Dsrb with riving knife; with cross-cut saw; fully mechanized with remote-controlled H 38 carriage; Year: 2001, complete overhaul and new electronics 75 kW

Condition: used, Year of construction: 1993, Functionality: fully functional, conveyor belt length: 2,730 mm, conveyor belt width: 360 mm, conveyor belt speed: 50 mm/s, total length: 2,730 mm, total width: 490 mm, total height: 1,620 mm, power: 0.762 kW (1.04 HP), motor manufacturer: BONFIGLIOLI, Equipment: type plate available, TAF item number: 1000004806 Manufacturer: trio-technik Year of manufacture: 1993 Overall dimensions: 2,730 x 490 x 1,620 mm (LxWxH) Width including side panel: 490 mm Width including drive: 490 mm Side panel height: 80 mm Total conveyor length: approx. 2,820 mm Conveyor length, horizontal: approx. 820 mm Conveyor length, vertical: approx. 2,000 mm Csbu Sowgmrmjaa Derb Conveyor width: 360 mm Belt type: PVC, cleated belt Belt width: 400 mm Cleats: H = 20 mm, cleat spacing = 400 mm Substructure: mobile, height-adjustable, max: 1,620 mm | min: 1,250 mm Drive: chain drive Motor: gear motor Motor data: 0.762 kW Conveyor speed: 0.05 m/s, constant Net weight: 82 kg Special features: incl. ON/OFF switch Condition: Used / fully functional Function test: OK

Condition: used, operating hours: 611 h, fuel type: electric, fuel: electricity, General information Field of application: Grounds care Technical information Steering: articulated Empty weight: 1.130 kg Functional Working width: 100 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Transport dimensions (LxWxH): 1,7x1x1,6 Production country: NL Additional information Please contact Vink Machinery for more information Tennant 7100 * 2005 * 611 working hours * Battery drive * External charger * 1130 kg own weight Crobu Saaowa Dc Aj Dob

Condition: used, machine/vehicle number: 10461, 3-blade rotor (offset blades) 2 rows of stator blades Rotor diameter 300 mm Working width 600 mm Cjbu Soghgg Rsaa Djrb Inlet cross-section approx. 440 x 600 mm

Condition: excellent (used), Year of construction: 2006, -Lifter for the bowl of a spiral mixer or a VMI inclined axis mixer - Bowl blocking by lever - 4 possible pouring directions - Drive by chain -Loy Tdwhsuwdhfo Sjrk - Motorization "upwards downwards". - Safety rack - Voltage: 400 V - 50 Hz - Power: 1.1 kW - Amperage: 2.81 A - Weight of dough: 160 kg - Weight of dough + container: 340 kg Crjbu Sasuwdhfea Deb - IP 54 PROTECTION - Compatible with : Brl0Iankuge 1- Spiral mixer: VMI SPI 220, SPI 340 and SPI 400 ACCESS. -Inclined axis mixer VMI 2330 MAL, MAEHW and MB 1024 AH. - Bowl height in pouring position between 1.70 m and 2.70 m. - Serial number: 143174 - Year of manufacture: 2006 Overhauled material: The material is prepared when it is ordered. The takeover and return deadlines will be agreed at that time (please ask for the price after reconditioning).

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 150E/140207, Disc finishing machine for high-gloss polishing, deburring and fine grinding of non-ferrous metals, jewelry, titanium, steel alloys and reduction of orange peel formation. Polishing and grinding granulates are used for dry processing. Cebu Saaerwl Ngs Dorb PLEASE NOTE: The machine is not suitable for wet processing! It only works in dry processing. Prepayment Transportation not included

Condition: used, machine/vehicle number: 11058, 3-blade rotor 8 rotor blades (staggered) 2 rows of stator blades Rotor diameter: 200 mm Cjbu Sasghgg Hja Djrb Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Stator blades: 2 Crjbu Ssghgbzeaa Dsb Drive: 5.5 kW