Used Knegt 25 Pk for sale (46,055)

Year of construction: 2015, Condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC Deln Upjd Sg Hrohaeut control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: used, mileage: 114,296 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 05/2018, fuel tank capacity: 80 l, emission class: euro6, color: white, number of seats: 2, number of previous owners: 1, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, traction control, trailer coupling, = Further options and accessories = Dusln Uphswcqd Eoaet - Right-hand sliding side door - Heated exterior mirrors - Passenger airbag - Bluetooth car kit - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver's airbag - Remote central locking - Height-adjustable driver's seat - Lumbar support - Front center armrest - Multimedia capability - Radio - Reversing camera - Starter interrupter - Partition = Further information = General information Number of doors: 5 Model range: March 2016 - July 2019 Cabin: Single Technical information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 2,298 cc Transmission: 6-speed, manual Dimensions Length/Height: L2H2 Dimensions (L x W x H): 555 x 207 x 250 cm Weights Curb weight: 1,918 kg Payload: 1,582 kg GVW: 3,500 kg Interior Interior: Black Environment CO₂ emissions: 183 g/km Consumption Average fuel consumption: 7 l/100 km Urban fuel consumption: 7.6 l/100 km Extra-urban fuel consumption: 6.7 l/100 km Maintenance, history, and condition Booklets: Available General technical inspection (APO): Inspected until May 2026 Number of keys: 2 (2 remote controls)

Condition: used, color: other, first registration: 03/2013, Year of construction: 2013, Palfinger PK 26002, 2013, 5x Hydraulically extendable, 2x Extra function, Jib preparation, Radio controlled = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Dsljwcq Sion Uphaeut - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 2006, Folding machine with rotating upper beam (straight tool on one side, segmented tools on the other) with the newly installed Prolink control system. Specification: Manufacturer: Göteneds Model: FUTURA 25 Year of manufacture: 2006 Djlorx N U Hjn Uphaeut Working length: 2 600 mm Bending thickness: 2.5 mm Rear support: automatic 2 000 mm Control system: newly installed ProLink Other features: steel wheels on the rear support, adjustable folding speed, curvature compensation system, quick tool lock, tool height 150 mm. Weight: 4 290 kg. Delivery: two months after order If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), lifting height: 12,200 mm, load capacity: 32,000 kg, net weight: 38,000 kg, Demag DH-takel met digitale weegschaal breedte: 6008 mm hoogte van de hoofdligger: 1500 mm Dsln Uphjv Sfrwoasut hoogte van de takel bovenop de balk: 1210 mm Kind of: overhead travelling crane Span: 25 meter Tackle speed: 6,3 / 12,6 m/min Rotationspeed: 10 / 34 m/min Displacementspeed: 10 / 100 m/min Numbre of riggers: double girder

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts Djlneu Idhyj Uphajut drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Dujln Uphsvncifeaet Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg

Condition: excellent (used), Year of construction: 2004, operating hours: 100 h, Functionality: fully functional, machine/vehicle number: 84780204, overall weight: 3,100 kg, input current: 7 A, input frequency: 50 Hz, input voltage: 400 V, heating capacity: 3 kW (4.08 HP), power: 3 kW (4.08 HP), space requirement width: 1,200 mm, space requirement length: 2,500 mm, The machine was bought by previous managment, and was not used after initial testing. It has been staying in the warehouse for years , not used. If you need more specifications - please let us know. We are simply looking to get rid of it and preffer selling to scrapping. The machine is operatable and in very good condition. Dujln Ujv Txrasphaot There is no glue applicator included. Only the press itself. Purpoused to press multiple panels of the same size.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: TY221008, number of previous owners: 1, Automatic wooden pallet nailing machine is mainly used in the production of American and European pallets. Our pallet nailing machine is equipped with pallet turning device and palletizing device, high degree of automation. The whole machine adopts automatic program control, the operating system adopts imported PLC. Our company has made many improvements on the wooden pallet nailing machine, and the price of the wooden pallet nailing machine is relatively low. The machine runs stably and can run continuously and efficiently. Doln Upewfdglohasut

Year of construction: 1987, Condition: excellent (used), Functionality: fully functional, 3 pieces Conical mixer 2500 Liter Brand: Hosokawa Micron / Vrieco Made of stainless steel 304 All parts that come into contact with the product are made of stainless steel 304. Machines are used to produce milk powder (food) Machines have a fold-away bottom funnel, which can be opened and closed with quick clamps. The mixer is ground and polished on the inside The screw is driven with 7.5 kW The rotating arm is driven with 0.75 kW Duoln Upswcd Ttehajt Product inlet dimensions: 950 x 250 mm 3 pieces available with exactly the same design and machine number Including inspection by the manufacturer (Hosokawa Micron) Machines can be viewed in Wekerom All 3 machines were built in 1987

Condition: excellent (used), mileage: 454,000 km, power: 478 kW (649.90 HP), fuel type: diesel, color: blue, axle configuration: 8x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 5,800 mm, Year of construction: 2018, operating hours: 2,020 h, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, retarder, sleeping cabin, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Electric windows - Electrically adjustable exterior mirrors - Low noise level - Speed limiter - Intarder - Refrigerator - Alloy wheels - Air suspension - Radio/CD player - Reversing camera - Sunshade - Auxiliary heating - Toolbox - Xenon lights - Power take-off (PTO) - Central lubrication system - Central locking system - Tow bar = Additional information = General information Year of manufacture: September 2018 Axle configuration Suspension: Air suspension Front axle 1: Light alloy wheels; steered Front axle 2: Light alloy wheels; steered Rear axle 1: Light alloy wheels; reduction: planetary axles Rear axle 2: Twin tires; LM rims Weights Unladen weight: 19,925 kg Payload: 17,075 kg GVW: 37,000 kg Functional Crane: Palfinger PK 53002-SH E, built in 2018, behind the cab Body brand: Palfinger CE marking: Yes Dslnjwcfnle Uphasut Condition Technical condition: very good Visual condition: very good

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 640 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 150 mm, mast type: standard, construction height: 2,145 mm, fork length: 1,200 mm, total length: 2,700 mm, drive type: Treibgas, construction width: 1,150 mm, net weight: 4,200 kg, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: very good Front tires type: super elastic Front tires condition: 100% Duolju H Ru Ron Uphaet Rear tires type: super elastic Rear tires condition: 100% Description: Factory-reconditioned used device including new inspection and new acceptance according to FEM (ex UVV). Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, heating, full cabin, full free lift, CE certificate, safety light, Opening range 440-1,240 mm

Condition: good (used), DIGÉP SD25 tilting round press, eccentric press machine 25t Manufacturer: DIGÉP Type: SD-25 Table: 380 x 515 mm Doln Uphotrww Eoasut Stroke length: 10-90mm Weight approx. 1.9t

Year of construction: 1992, Condition: good (used), Travel X-axis: 1500 mm Travel Y-axis: 420 mm travel Z-axis: 400 mm Djlnscph Tmo Uphaout clamping surface: 2 x 700 mm x 420 mm max. table load: 800 kg number of tools: 0 2 x 36 pieces tool holder: SK 40 gr. feed: 25 m/min weight: 9 t area required: 6,50x4,5x3,1 m small speed: 50 rpm big speed: 7500 rpm stepless rapid traverse: 25000 mm/min control: Siemens Sinumerik 820 M GA 3 + 2 x single axis stepper motor control Sama SFI present clamping system: per place 1 NC dividing head with counter bearing, carrier plate, rotary distributor and hydr. clamping and 4-fold dividing head with rotary distributor in special design and sep. NC control Clamping system: 4-fold dividing head consists of 4 -2 jaw chucks, clamping pressure 12bar Make: Hofmann HMR 4/kombi 294/4 Tool breakage control Meutrsuix ATM B310 Renishaw probe system (without probe) Coolant system with sparger, filter system and fine filter

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2018w25-000298, overall weight: 3 kg, total length: 180 mm, volume flow: 2.5 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 6 kW (8.16 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Unused stock item: KSB Calio S 25-40. Highly efficient heating and drinking water pump for energy-saving use in heating and drinking water systems. Its compact design and high efficiency ensure a durable and cost-effective solution. Type: Calio S 25-40 Machine number: 29134756 Product number: 2018w25.000298 Nominal diameter: DN 25 Maximum head: 4.9 m Deln Ujv Tm Hfsphaeut Voltage: 230 V Efficient, variable-speed circulation pump Integrated control system for optimized performance

Condition: like new (used), mileage: 1,000,000 km, Year of construction: 2015, MERCEDES ACTROS 25-42 YEAR 2015 EURO 6 9.60 X 2.55 H2.70 LOW INTERIOR WITH UNDERBODY DHOLLANDIA TAILGATE 20QLI EQUIPMENT 2019 AUTOMATIC GEARBOX RETARDER INTELLIGENT THIRD AXLE KM 100000 Doln Uphowfxizoasut

Condition: new, Year of construction: 2023, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,670 mm, free lift: 1,590 mm, mast type: triplex, power: 17 kW (23.11 HP), fork carriage width: 1,150 mm, fork length: 1,200 mm, ground clearance: 110 mm, front tire type: Trelleborg, front tire size: 23x9-10, rear tire type: Trelleborg, rear tire size: 18x7-8, total length: 3,680 mm, wheelbase: 1,650 mm, drive type: Elektro, construction width: 1,220 mm, net weight: 3,359 kg, - Typzeichen des Herstellers RX 60-25 - Geräteart Elektro - Bedienung Sitz - Lastschwerpunkt 500 mm - Lastabstand 420 mm - Achslast vorne mit Last kg 6335 - Achslast hinten mit Last kg 816 - Achslast vorne ohne Last kg 2393 - Achslast hinten ohne Last kg 2258 - Bereifung Superelastik - Spur vorne mm 992 - Spur hinten mm 900 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1139 - Kupplunghöhe mm 485/365 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3654 Dueljvyk Uyjn Uphaet - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 3852 - Wenderadius mm 2032 - kleinster Drehpunkt mm 539 - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,46 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last N 8000 - Zugkraft ohne Last N 8110 - Max. Zugkraft mit Last N 17440 - Max. Zugkraft ohne Last N 17220 - Steigfähigkeit mit Last % 21,3 - Steigfähigkeit ohne Last % 29,5 - Max. Steigfähigkeit mit Last % 25,5 - Max. Steigfähigkeit ohne Last % 29,7 - Beschleunigungszeit mit Last s 4,5 - Beschleunigungszeit ohne Last s 4,2 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Doljk It Utsn Uphajut

Condition: used, mileage: 390,373 km, power: 353 kW (479.95 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 26,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 08/2025, emission class: euro6, brakes: retarder, loading space volume: 8 m³, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor Dusln Upjvzv Syehaet * ABS * ASR * ESP * Radio * Navigation system * Rear view camera * Auxiliary heating * Cruise control * Electric windows * Electric mirrors adjustable * Heated mirrors * Fog lights * Roof hatch * Driver's comfort seat * Heated seats * Longitudinal and transverse locks * AP axles * Steel bumper * Orange rotating beacon * Air intake at top * Air dryer * Trailer coupling * Duomatic air connection * Hydraulic connection for trailer * Foldable underrun protection * 16-speed * Suspension: leaf-air * Payload: 10530 * Continuous brake: Intarder ----Special structure: Crane: Palfinger PK 24001-KC, load capacity max. 8.05t, foldable, 4-way hydraulic extension (working height approx. 15.8mtr), fully hydraulic support, oil cooler, floor control. Load diagram read: Lifts at 4.1m-5.6t, 6.1m-3.6t, 8.1m-2.65t, 10.2m-2.05t, 12.4m-1.66t.----Construction: Meiller 3-sided steel pallet tipper, Bordmatik left, spring-loaded side wall right (swinging + foldable), raised front wall, jet side walls, lashing eyes, pneumatic rear wall locking. Sale only to traders. FOR EXPORTS ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Year of construction: 1982, Condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli Djln Ued I R Ngjphasut type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1965, Condition: good (used), Functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system Djlnstuuvzo Uphaeut - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 1990, Condition: used, machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg cutting speed: 7,2 / 8,1 / 9,6m/min maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm power supply: 380V 50Hz / 110kW Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Dslnoinim To Uphasut Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production.

Year of construction: 1980, Condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition tractive force: 25000 KG clearing length: 2000mm Delsdffzfsn Uphajut wheel positions: 3 pieces Distance between the wheels: 160mm diameter of the drawing heads: 3 x Ø 100mm Clearance width between the cylinders: Nominal size 500mm passage width between the cylinders measured: max. 590mm Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min Return speed: hydraulically infinitely variable from 5 to max. 25m/min Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 22 KW Accessories / special equipment: The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable). The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Year of construction: 1971, Condition: used, General / technical data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12to tractive force: 25to Dueljlwvm Aen Uphaot maximum stroke: 2000mm clamping surface: 500 x 500 table opening: 550mm power supply: 380 Volt / 50 Hz Accessories/ special equipment: - tilting table Remark: The machine is under power in our warehouse and can be inspected.

Year of construction: 1990, Condition: used, max.: tractive force 25.000 KG max.: tool length 3520 mm max.: cutting speed 9,6 m/min passage width 520 mm Doln Uscm Eiwsphaout The machine has machined connecting rods and con rod caps. The machine is designed for mass production (output 400 pieces/hour).