Used Knegt Tillage Equipment Machines for sale (84,655)

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear Dsb Etowhzuloq Auekl

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal TC Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Dkobswhxh Aj Etq Auol Year of manufacture: 2016 Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, and the existing coarse and fine fittings

Condition: used, Year of construction: 1986, Bending length 3600 mm Max. pressure 175 ton Length of stroke 400 mm Working radius in frames 300 mm Controlled on 4 axis (Y1-Y2-X-R) Controlled crowning Control: Cybelec ModEva 10 S Equipped with: Dkjb Etov Hy U Noq Aujl Pneumatic clamping of upper & lower tools Various tools (7-12-16-24-32 mm) lower tools & 4 pcs. upper tools

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Injection Unit Screw diameter 60 mm Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Max open daylight 1130 mm Mould height min 250 mm Mould height max 550 mm Additional Equipment Dob Etq Aewg H Uzouskl Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Dkeb Etokwhapsq Auol Storage location: Solingen

Condition: refurbished (used), Functionality: fully functional, type of cooling: air, welding current (max.): 280 A, For sale: VLH TR 280 C 280 AMP 400 Volts 21 steps adjustable 2/4 Step Spot welding Steel and Stainless Steel weldable Refurbished, tested, and Serviced Test welding possible Including: 3 Meter Mig welding torch, earth work lead with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Dkjb Etq Ajv R Ei Tjuel OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2010, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) - Automatic material feed/machine loading: DMG Automation - MiniMax, - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel The machine is in a well-maintained condition and can be inspected at any time under power. Dkob Etqjwhzufs Aujl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: excellent (used), Year of construction: 1996, operating pressure: 10 bar, 2 used steam boilers ----- - mounted on a skid - Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 14 sq m Capacity: 800 kg/h Permissible operating pressure: 10.0 bar Increased test pressure: 18.0 bar Water capacity at low water level approx.: 748 l Dkjb Etowhxhvsq Ausl Water capacity when full approx.: 1,108 l Year of construction: 1996 Equipped with a Weishaupt GL3/1-E oil burner, ZMD, 90-630 kW, gas control line, feedwater pump, control cabinet and the existing coarse and fine fittings.

Condition: excellent (used), power: 178 kW (242.01 HP), overall weight: 30,390 kg, Year of construction: 2017, operating hours: 9,474 h, CAT 330F/SW/Additional Hydraulics/ZSA • Manufacturer: Cat • Type: 330 F • Year of Manufacture: 2017 • Operating Hours: 9,474 hours • Weight: 30,390 kg • Power: 178 kW/242 hp • Central lubrication system • Hydraulic hammer/shear/grab • Quick coupler • Type: ABS Dower Latech 10 ton • 1x 1.53 m bucket • Demolition grid • Interior filter • German machine • Ready for immediate use • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. Dobjwif Ncj Etq Aujkl - Sale subject to our terms and conditions.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,666 h, General Data Measurements width 1180 Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mmm Shot weight 451 g Stroke volume 475 cm³ Clamping Unit Clamping force 180 T This Victor VS180 was manufactured in 2003. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information about this machine. Application Types Injection Moulding Dkjb Eswg Iarstq Aujl

Condition: used, Year of construction: 2006, operating hours: 737 h, 2006 | JLG | JLG Toucan-DUO (6 meters) | Used Vertical Mast Lift | 737 hours 📍Location: Netherlands, Loon op Zand 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 3100 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 29 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ Dsb Etq Ajwhddpouokl 📌 Inspector's Comment: Lift operates ok, but the small platform doesn't fully lift. The batteries are end of life. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "35978 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: refurbished (used), Functionality: fully functional, type of cooling: air, welding current (max.): 280 A, For sale: VLH TR 280 C 280 AMP 400 Volts 21 steps adjustable 2/4 Step Spot welding Steel and Stainless Steel weldable Refurbished, tested, and Serviced Test welding possible Including: 3 Meter Mig welding torch, earth work lead with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Dksb Ejv R Eh Nstq Auol You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2008, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2007) Dob Etqowhzt Uo Aujkl - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, ALZMETALL Type AB 3 ESV Pillar Drill Machine No. 20714, Year of Manufacture: 1990 Drilling Capacity: 32 mm Spindle Mount: MT 3 - Short Spindle Throat: 285 mm Spindle Stroke: 160 mm Table Size: 615 x 370 mm Column Diameter: 130 mm Spindle Speed: 65 - 1750 rpm Continuously variable Automatic feed 0.1 - 0.2 - 0.3 mm/rev Motor power 1 and 1.8 kW, pole-changing Power supply 380 volts, 50 Hz - Spindle speed via 2 motor speeds, 2 gear stages, and variator gearbox - Countershaft speed for high torque at low speeds - Automatic feed with electromagnetic clutch and button on the cross-handle - Thread cutting device with forward/reverse rotation Debowihgqo Etq Auskl - Foot switch for reverse rotation - Table height adjustment via hand crank - Tachometer for spindle speed - Emergency stop - Lighting device - Albrecht keyless chuck 1-13 mm Space required L x W x H 950 x 7000 x 1900 mm Weight 430 kg Good condition

Condition: ready for operation (used), Year of construction: 1999, operating hours: 4,937 h, General Data Measurements width 1180 Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mm Shot weight 451 g Stroke volume 475 cm³ Clamping Unit Clamping force 180 T Max open daylight 970 mm Distance between bars 510 x 510 mm Mould height min 200 mm Mould height max 500 mm This Victor VS180 was manufactured in 1999. A hydraulic injection moulding machine, it offers robust performance for various plastic processing applications. Consider the opportunity to buy this Victor VS180 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Dob Etowg Ia Eoq Aujkl

Condition: used, Year of construction: 2008, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2008) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2008) - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel Dkjb Eswhzt Ietq Ausl The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: ready for operation (used), Year of construction: 2003, operating hours: 7,507 h, General Data Measurements width 1135 Measurements depth 3354 Measurements height 2080 Machine weight 4100 Dkeb Etq Aewg H U Ueuol Injection Unit Screw diameter 40 mm Shot weight 155 g Stroke volume 163 cm³ Clamping Unit Clamping force 80 T Max open daylight 670 mm Distance between bars 360 x 360 mm Mould height min 150 mm Mould height max 350 mm This Victor VS80 hydraulic injection moulding machine was manufactured in 2003. It is a robust and reliable choice for your production needs. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2008) - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel The machine is in a well-maintained condition and can be inspected at any time under power. Dsbswhztzs Etq Auskl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2007) - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel Djbowhztuj Etq Aujkl The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, Year of construction: 2008, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V Djb Etqswhztnj Auokl - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2008) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2008) - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Dsb Etqswhztho Auekl Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: DMG - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - TRF110-OF (Year: 2007) - Automatic machine loading: DMG - Minimax (Year: 2007) - Consisting of: Handling articulated robot: Fanuc - LR Mate 200iC (Control system: R-30iA Mate) - Cable remote control - Control tablet - Workpiece loading/unloading drawer - Discharge conveyor for workpiece removal The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Dkjb Etq Aswhztbeujl The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - .3 (Year: 2007) - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2007) - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel The machine is in a well-maintained condition and can be inspected at any time under power. Dkjbswhzr Re Etq Ausl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) Dksb Etqjwhzr De Ausl - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2007) - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear

Condition: used, Year of construction: 2007, max. turning diameter 42 mm max. turning speeds 6.500 U/min control Fanuc 160i Turning Automatic Lathe - swiss lathe | DMG Gildemeister - Sprint 42 Linear Dkjb Etowhzrwjq Aujl Additional equipment: - Connected load: 40 kVA / 400 V - Chip conveyor: BMF Bührener - SPE63/30-500 (Year: 2007) - Coolant treatment/filtration system: DMG - .3 (Year: 2008) - Automatic material feed/machine loading: DMG Automation - MiniMax (Year: 2007) - Handling articulated robot: Fanuc Robot - LR Mate 200iC (Control: Fanuc - R-30iA Mate) - Cable remote control/control panel The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear