Used Meba for sale (46)

Condition: good (used), Year of construction: 2006, saw band length: 3,700 mm, saw band width: 27 mm, cutting width (max.): 300 mm, cutting range square at 90°: 260 mm, net weight: 650 kg, Portal sawing machine with linear guide on two columns, capacity is max. 260 mm Ø or 260 x 300 mm rectangular. Machine is equipped with 6 meter roller conveyor + 6 meter push system PEHU on the other side. Machine is delivered with 5 pieces saw bands Celrfsvi H Rceyzbegt

Condition: used, Year of construction: 1990, cutting diameter 320 mm saw band length 3800 x 32 x 1,1 mm capacity 90 degrees: round 320 mm capacity 90 degrees: flat 450 x 220 mm cutting speed 18 - 115 m/min total power requirement 1,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,8 x 1,6 x 1,4 m Semi-automatic mitre bandsaw - Mitre max. 60° - Micro-spraying device Colrevu Hbrsfyzbogt

Condition: used, Year of construction: 2004, cutting diameter 410 mm saw band length 5800 mm table height 750 mm 700 mm 410 mm 700 x 410 mm re. 410 li. 410 mm cutting speed re. 420 x 410 li. 430 x mm down speed 330 mm dimensions of saw-band 330 x 410 mm workpiece weight 15 - 150 m/min Cjlrfsrkr Uloyzbjgt capacity 90 degrees: round 0 - 600 stufenlos mm/min. capacity 90 degrees: flat 5800 x 41 x 1,3 mm capacity 45 degrees: round max. 250 kg/m 3x 400 V / N/ PE 50Hz 8,1 kW work height max. 3300 kg connected load 4700 x 2900 x 2100 mm - chip conveyor - Automatic feeder, 1300 mm - Material bundle tension - Laser light for cutting line display/marking saws

Condition: good (used), Year of construction: 2015, 30° left Ø 520 550 x 520 45° left Ø 560 800 x 520 90° Ø 620 1250 x 520 Cgslrfyzjvbgipjbjt 45° right Ø 560 800 x 520 30° right Ø 520 500 x 520 Motor 14,5 kW Saw blade 10000 x 67 x 1,6 mm Saw blade speed 15/150 m/min. Length of remaining piece without bundle clamp manual: 40 mm

Condition: used, Year of construction: 2002, - Material feed up to 600 mm - Year of construction 2002 specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Miter right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle clamping width/height: 0-500 mm / 15-335 mm - Material insertion single/multiple: 0-600 mm / 0-9999 mm - Remaining piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: infinitely variable hydraulic - Lowering speed: 0 - 300 mm/min (infinitely variable) - Saw blade dimensions: 4400 x 34 x 1.1 mm - Saw blade tension: with torque wrench - Max. Support weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz Cslrfou Uu Hweyzbogt - Compressed air: 6 - 8 bar, min. 50 l/min - Saw blade drive: 3.0 kW - Coolant pump: 0.11 kW - Hydraulic pump: 2.2 kW - Electric swivel drive: 0.09 kW - Spindle insert drive: 0.55 kW - Total power requirement: min. 7.5 kW - Rated current: 16 A - Back-up fuse: 25 A Filling quantities: - Hydraulics: approx. 30 l - Coolant: approx. 80 l - Micro-sprayer: approx. 0.7 l Dimensions: - Weight of the machine: approx. 1710 kg - Machine dimensions WxHxD: approx. 2500 x 1900 x 2300 mm

Condition: new, Year of construction: 2024, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Technical data: Cutting range in mm round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Saw blade drive with limit switch Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm Cgolrfyot D Azcezbst

Condition: good (used), Year of construction: 1998, Functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round at 45°: 300 mm, cutting range round at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Cgjlrfysq Atyzozbet Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Year of construction: 2021, Condition: used, Functionality: fully functional, Used automatic measuring stop Travelling distance: 3000mm Mounting: to the left of the machine including matching roller conveyor. Technical data: Automatic precision measuring stop with NC control. For roller conveyors up to 500 mm wide. Rail length, linear guide approx. 3400 mm, measuring length 3000 mm. Positioning accuracy 0.1 mm via servo motor. Position detection via non-contact measuring system. Cgolrju Edpxefyzbot Pneumatic clamping. Free travelling and pneumatic lifting and lowering after each cut. Manual traverse buttons. Piece counter. Working height: 750 mm

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, MEBA type TBM 12.1 immersion system - 12.10 m long x 1.22 m wide x 1.25 m high, clear dimensions; - Year of construction 1989; - Control TBS 5.2 with program selection, - Wooden support 7 m long, hold-down device 6 m long; partially rusted, - Basin is rusted on the inside, - with drip tray, - Transport dimensions approx. 12.70 x 2.06 x 2.67 m; weight approx. 9.0 tons - Operating instructions in German - System is empty, without impregnating agent, - loaded free on truck! Second-hand dipping plant, product MEBA Type TBM 12.1 Dipping basin: 12.10 m long, 1.22 wide, 1.25 high (inner dimensions), year of manufacture 1989, Wood rest: frame 7.0 m, Holding-down clamp: 5 folks 6.0 m, hydraulically working, partially rusted, Drain pan: 12.70 m long; 2.06 wide; 1.02 high (outer dimensions), Total weight of approx. 9.0 tons, Transport-measure: 12.70 m long, 2.67 m high, 2.06 m wide, The dipping basin and the drain pan form one unit. The basin inside is partially rusted, Cgjlrou E H N Ujfyzbet Basin is empty without impregnation solution. Operating instructions in German language. Loaded free truck, The maximum package size that can be dipped is 0.8 m high x 1.05 m wide.

Condition: new, Year of construction: 2024, 2-column guided band saw in semi-automatic design with stepless mitre adjustment on both sides 30° - 45° - 90° - 135° With patented mitre system (ERP no. 0491120) Particularly suitable for universal use with different cross-sections cross-sections, materials and frequently changing miter cuts. Center of rotation remains unchanged at every angle setting, thus exact length measurement at 90° and in the miter area. MEBA Eco-Saw-Innovation 2000 The universally applicable MEBA 335 DG mitre band sawing machine is ergonomically perfected and has an optimum price-performance ratio. Simple central operation. The machine control system complies with CE standard 89/289 Technical data: Cutting range: round/flat 90° 335/500x335 45° right 330/305x335 30° right 180/170x335 45° left 305/305x335 Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit - Saw band 3 kW ; 400 V, 50 Hz - Hydraulics 0.55kW - Coolant pump 0.11kW Saw frame feed: infinitely variable up to 300 mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without set-up elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Subject to technical changes. Cgjlrfyet Dpw Rozbjt Basic equipment of the MEBA 335 DG-500 Semi-automatic sawing sequence with workpiece clamping-sawing-up to set height after cutting is complete MEBA high-performance package: Infinitely variable hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Manual mitre adjustment, digital reading with 0.1° accuracy Rapid traverse lowering of the saw frame via pushbutton up to the material edge Patented double mitre system (ERP no. 0491120) Unique double mitre bandsaw with which mitres on both sides can be set simply and economically by swivelling the saw frame and the material support. Automatic movement of the clamping vices and digital miter adjustment The material clamping vise moves automatically in the direction of flow according to the desired miter, so the material is always clamped at right angles, close to the saw band. The mitre pivot point is the intersection point between the saw blade and the fixed clamping jaw, which means that the length dimension does not change when the angle position changes. Hydraulic full-stroke workpiece clamping. Quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame. Stable two-column linear saw frame Saw blade set at a 3° angle to the material support surface. Central machine operation Saw frame clearance height adjustment Movable band guide arm, adjustment to material width Saw blade deflection roller carbide guide Rotating chip cleaning brush Saw blade tension with torque wrench Operating instructions and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: V MLA3000000, The all-rounder for series production: Automatically measure and increase productivity. Technical data: Measuring length: 3000mm (other lengths available on request, 3000-6000mm) Traversing speed: 40m/min For roller conveyors up to 500mm wide Freestanding and swivelling control panel - Optional: Integration in machine control system. Link to the saw for free travel at saw start. Manual traverse buttons, piece counter, mitre calculation/cutting channel. Pneumatic clamping for secure material stop. Moves electrically to position at the touch of a button. Please specify the desired mounting side (right or left of the machine) when enquiring/ordering. Your benefits at a glance: Cgjlrfyevncnhszbet Even more time savings thanks to high speed. High productivity for series projects. Saves human resources: No specialised staff required. No time-consuming training. Subject to technical changes. You will receive details of the exact delivery time in the order confirmation. Roller conveyors shown are not included in the scope of delivery.

Condition: good (used), Year of construction: 1994, MEBA type TBM 12.5 immersion system - 12.50 m long x 1.22 m wide x 1.25 m high, clear dimensions; - Year of construction 1994; - Control TBS 6.9 with program selection, - Wooden support 7 m long, hold-down device 6 m long; - with drip tray, - the system is fully functional, but the paint in the pool has peeled off in some places. peeled off in some places. - Weight approx. 9.5 tons - Transport dimensions approx. 13.15 x 2.10 x 2.67 m - Operating instructions and documentation in German - Plant is empty, free truck! - max. package dimensions 0.75 m high x 1.10 m wide, - loaded free on truck!!! Second-hand dipping plant, product MEBA type TBM 12,5 Dipping basin: 12.50 m long, 1.22 wide, 1.25 high (inner dimensions), year of manufacture 1994, Cjlrfou E H Tysyzbogt Automatic microprocessor control unit including 16 programs to select the operating cycle and operating time and integrated overflow protection. Wood rest: 7.00 m long, 70 tons carrying capacity, Holding-down clamp: 6.00 m long, Collecting basin: 13.25 m long; 2.10 wide; 1.05 high (outer dimensions), The dipping basin and the drain pan form one unit. Total weight of approx. 10.00 tons, Transport-measure: 13.25 m long, 2.67 m high, 2.10 m wide, Plant works, however the paint has peeled off in individual areas of the basin, wood rest and the holding-down clamp. The plant is empty, loaded free truck. The maximum package size that can be dipped is 0.75 m high x 1.2 m wide.

Condition: new, Year of construction: 2024, Patented miter system Infinitely variable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Cgslrfsh S Nxpoyzbot Hydraulic clamping of the material Powerful frequency controlled saw blade drive Swivel range 30° right / 45° left Cutting range in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° r. round 360, flat 420 x 360 30° r. round 300, flat 300 x 300 Remaining piece length without bundle tension 60mm incl. the special accessories Microspraying device laser light clamping pressure regulator driven chip brush manual lifting roller Set-up elements

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: V ML0100000, The uncomplicated measuring fence: Simply screw on. Precise sawing. Achieve high quality. Technical data: Measuring range: 1000mm (other lengths available on request, 1000-6000mm) Design: manual For roller conveyors up to 500mm wide With scale and vernier for easy reading Swivelling - therefore flexible working Accuracy: 0.15mm/m Guide rail included Please specify the desired mounting side (right or left of the machine) when enquiring/ordering. Your advantages at a glance: Customised work: Sustainable. Little waste. Cost-saving No skilled labour required. No time-consuming training. Repeated execution of identical cuts without having to remeasure. Cjlrfyzovncmwobegt The right measuring stop for everyone thanks to a large selection. Material savings - reduction in material waste thanks to precise cuts Time saving - an advantage for series projects Subject to technical changes. You will receive details of the exact delivery time in the order confirmation. Roller conveyors shown are not included in the scope of delivery.

Condition: new, Year of construction: 2024, Cutting range 90 round 260mm flat 300x260mm smallest diameter 5mm NC-controlled, automatic material insertion with hydraulic material full stroke clamping Easy operation by NC-control with plain text display Material advance function without reclamping of the material for short sections Stable, linear guided feed gripper with servo positioning for highest accuracy Automatic adjustment of the belt guide to the material width incl. the accessories driven chip brush, synchronous to the belt speed Colrfoh Tnd Asyzbsgt separately installed control panel 7" CE panel, networkable, 1000 data sets storable, history memory for various functions and data, etc.

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: V MLDV100000, The digital measuring stop for even more stability and heavy material. Technical data: Measuring range: 1000mm (other lengths available on request, 1000-6000mm) Design: digital display For roller conveyors up to 500mm wide DOUBLE manual clamping Swivelling material stop Gas spring assisted lifting Screw-on stop extension Manual free-lifting device - pneumatic also possible as an option. Including 2x linear guide carriage Colrfysvncl Tjzbjgt Please specify the desired mounting side (right or left of the machine) when enquiring/ordering. Your benefits at a glance: Easy handling of heavy material. Utilise all the advantages of the digital measuring stop, even with solid material. Save time. Money. Resources. Even with heavy material. Subject to technical changes. You will receive details of the exact delivery time in the order confirmation. Roller conveyors shown are not included in the scope of delivery.

Condition: new, Year of construction: 2024, incl. hydraulic lifting of the saw frame with locking valve Microdosing system with and without laser light for cutting line indication Metal band saw machine for straight and miter cuts, infinitely variable from 30° - 45° - 90° - 45° - 30 ° according to scale center of rotation unchanged at every angle setting, therefore exact length measurement at 90° and in the miter range. Cutting speed: 35 u.75 m/min pole switchable Cutting range 30° left Ø 130 or 120x120 45° left Ø 200 resp. 180x180 90° Ø 260 resp. 300x260 45° right Ø 200 resp. 180x180 Colod Tb N Asrfyzbogt 30° right Ø 130 resp. 120x120 alternatively in "HS" version with semi-automatic saw discharge: - hydraulic lifting of the saw frame - hydraulic material clamping/short stroke - rapid traverse lowering to material top edge as well as micro spraying device with and without laser light

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: V MLD100000, Technical data: Measuring range: 1000mm (other lengths available on request, 1000-6000mm) Version: digital display For roller conveyors up to 500mm wide Screw-on stop extension (300mm) Colrfyevnck Nszbegt Precise stop plate, linear guide with ball bearings and magnetic measuring system Swivelling material stop Manual free-lift device (optional pneumatic) Please specify the desired mounting side (right or left of the machine) when enquiring/ordering. Your benefits at a glance: Saves time thanks to automatic adjustment and short set-up time. No stopping. Smooth workflow --> more output! Save material and costs with precise cuts. Work sustainably. The simplified saw application is an advantage for series projects Quick material handling. Easy handling for everyone. No special teach-in required. Subject to technical changes. You will receive details of the exact delivery time in the order confirmation. Roller conveyors shown are not included in the scope of delivery.

Condition: new, Year of construction: 2024, 2-column guided automatic metal band saw with infinitely variable miter adjustment of 90°- 45°- 30°. Particularly suitable for universal use with different cross-sections, materials and frequently changing miter cuts. Center of rotation unchanged at any angle setting, thus exact length measurement at 90° and in the miter range. Technical data: Cutting range: Cgolroh S Nxzofyzbst 90° round 335mm, flat 500x335mm 45° right 330mm, flat 320x335mm 30° right 200mm, flat 200x335mm Cut-off length: Single stroke up to 600mm, multiple stroke up to 6000mm. Cutting speed: AC frequency controlled drive 15-150 m/min infinitely variable at the control panel with the following additional equipment: Control panel free standing incl. the special accessories micro spraying device laser light Clamping pressure regulator 7" CE panel Set-up elements

Condition: new, Year of construction: 2025, The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The universally applicable MEBAbase 25 G mitre bandsaw is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data: Cutting range 90° - 255 - 265x200 or 200x200mm 45° - 175 - 200x160mm 30° - 110 - 115x100mm Cutting speed 35 / 70m/min Cslrjt Rv Iisfyzbegt Drive - saw blade 2kW; 400V, 50Hz Saw blade tension electrically monitored Saw blade dimensions 2565 x 27 x 0.9mm Weight 265 KG Dimensions 1180 x 1500 x 1750mm Basic equipment of the MEBAbase 25 G - MEBA mitre system: Large, swivelling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade. - Fast mitre adjustment from 90° - 45°, infinitely variable according to scale to 0.5° accuracy - The mitre pivot point is the intersection point between the saw blade and the material system, which is why there is no change in the length dimension when the angle position changes - Manual quick material clamping. - Material stop with scale up to 500 mm - Complete coolant system - Saw blade tension electrically monitored - 1 saw blade on the machine 6/10 ZpZ - Saw blade drive with limit stop - Operating instructions and spare parts list (digital) - Paint finish anthracite (RAL 7016) Subject to technical modifications. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive details of the exact delivery time in the order confirmation.

Condition: new, Year of construction: 2024, Automatic material feed Miter on both sides Compact design Exact positioning of the material by servo positioning technology Trend-setting electric saw feed with ball screw: Colrfyzsh S Nxdebsgt Highest cutting performance and quality, yet gentle on the saw blade Unique and patented double miter system: Material is always clamped at right angles Cutting range in mm 90° round 335, flat 500 x 335 45° right round 330, flat 320 x 335 45° left round 305, flat 305 x 335 30° right round 180, flat 170 x 335 Remaining piece length without bundle tension min. Manual: 80 mm Automatic: 300 mm Automatic cutting pressure and feed monitoring Frequency controlled AC drive 15-150 m/min Hydraulic full stroke material clamping Automatic movement of the vices Minimum speed and saw blade monitoring Electric miter swiveling via servo motor Visualized program input with CNC control Material feed via servo-controlled ball screw drive incl. the special accessories Micro spraying device Clamping pressure regulator Set-up elements