Used Ras for sale (73)

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm Djdpjdy Rhdjfx Aduowf -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: ready for operation (used), functionality: fully functional, working width: 3,200 mm, bending angle (max.): 180 °, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, opening width: 400 mm, TECHNICAL DETAILS Dwjdpfxsw Dcx Ds Aduof Working area Sheet width: 3,200 mm Sheet thickness: 4 mm Upper beam opening width: 400 mm Bending angle: 0 – 180° MACHINE DETAILS Total power requirement: 7.5 kW Dimensions & Weight Space requirement approx.: 5,000 x 2,200 x 2,560 mm Machine weight approx.: 5,500 kg EQUIPMENT RAS MonoBend control Foot switch

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 3 mm steel Manually adjustable rear stop up to 550 mm Side stops and table extensions Dwsdot T Hgbepfx Aduof Sheet metal holding knife sharpened Weight: approx. 2500 kg

Condition: used, Year of construction: 1989, Hydraulic Guillotine Shear Manufacturer: RAS Type 85.44 4000 x 4 mm Year of Manufacture: 1989 Technical Specifications Manufacturer: RAS Type: 85.44 Year of Manufacture: 1989 Usable Length: 4000 mm Sheet Thickness: 4 mm Power Consumption: 7.5 kW Dimensions: L 4.70 x W 2.0 (plus support arms 600 mm) x 1.70 m Weight: 5.7 t Equipment - Controlled backgauge 1000 mm - Motorized cutting gap adjustment - Multicut Eco 2000 control system - Pneumatic sheet support Dwjdpfxswbpwbj Aduef - Angle stop - 3 support arms - Scrap cart - Technical documentation All information is subject to change. Demonstrations are available at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Dodpfsv Tk Exsx Adujwf Frame overhang: 100 mm Tank capacity: 150 l

Condition: used, Year of construction: 1979, sheet width 2500 mm plate thickness 3 mm distance between columns 2540 mm back stop - adjustable 550 mm total power requirement 5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,2 x 2,5x 1,9 m Dwjdpfxovxwuds Adujf

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool Dwedpfx Adogxgm Hsusf -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, actuation type: hydraulic, stroke rate (min.): 35 1/min, stroke rate (max.): 80 1/min, sheet thickness (max.): 4 mm, section length (max.): 3,150 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Cutting length: 3,150 mm Sheet thickness: 4 mm Cutting angle: 1.45° Strokes per minute: 35 – 80 spm Throat depth: 200 mm Number of hold-downs: 16 pcs Backgauge: 5 – 1,000 mm Table height: 750 mm Dwedpfxjw Dcl De Aduof MACHINE DETAILS Total power requirement: 7.5 kW Weight: 4,200 kg EQUIPMENT Foot switch Electric backgauge Elgo 1,000 mm Angle stop 2 x sheet support arms Pneumatic sheet lifting device

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Dsdpfx Aewq Rumoduewf Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, RAS 74.30 upper beam tool (see picture) The upper beam tool was on a RAS 74.30 built in 1997 and was apparently only used rarely, the pictures speak for themselves. The upper beam tool is available for the entire length of the upper beam including the corner tool (see picture). Dwjdpfxjvx Hxro Adujf Viewing is welcome. Purchase without return or guarantee.

Condition: used, functionality: fully functional, Year of construction: 1999, machine/vehicle number: 86.33, working width: 3,190 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, overall weight: 6,800 kg, Equipment: documentation/manual, For Sale: RAS POWERcut We offer you the opportunity to acquire a high-quality guillotine shear from the renowned brand RAS POWERcut. This powerful machine is ideal for anyone involved in sheet metal processing who values maximum precision and efficiency. Product Details: - Model: Powercut 86.33 - Year of manufacture: 1999 - Condition: Used - Technical specifications: Weight 6,800 kg Width: 3,830 mm Cutting length: 3,190 mm Max. sheet thickness: steel 6 mm Back gauge depth: 5 – 1,000 mm Djdpew R Trmsfx Aduowf Benefits: - High precision and reliability - User-friendly interface - Low maintenance and durable Price: ON REQUEST If you are interested or require further information, please do not hesitate to contact us. Take this opportunity to optimize your production with this first-class machine!

Condition: used, Year of construction: 2019, Fold former RAS 22.09 - Very good used condition - Specifications: Number of roller stations: 9 pieces Profiling speed approx. (based on 72mm driving roller diameter): 16 m/min Largest sheet thickness to be folded: 1.5mm Profile height max.: 20mm Working shaft diameter: 28mm Center distance of the working shafts - Vertical: 72mm - Horizontal: 100 Minimum roller clamping dimension (both sides): 60mm Connection power: 3.0 kW Rated current - At 230V: 12A - At 400V: 7A Fuse: 16A Net weight approx.: 430 kg Noise level: 70 db(A) - Please note: Djdpfx Adsv Hc E Rsuswf Without roller set (optionally available on request)

Condition: as good as new (ex-display), Year of construction: 2025, motorized beading machine RAS 11.35 Operation via foot pedal right/left rotation via foot pedal Speed infinitely variable via potentiometer feed via hand crank complete with 9 pairs of standard rollers Divided stop Dsdpfjf Dqldox Adujwf sheet thickness 1,25 mm roller centre distance 50 mm Throat 200 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: MULTICUT-ECO 2000, working width: 3,190 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Dedpfoww E N Sox Adujwf Sheet width: 3,190 mm Sheet thickness: 6 mm Frame gap: 3,250 mm Cutting angle: 1.2° Strokes per minute: 32 - 75 spm Throat depth: 100 mm Adjustable backgauge: 5-1,000 mm Table height: 800 mm Travel speed: 180 mm/s MACHINE DETAILS Total power requirement: 15 kW Machine weight: approx. 6,200 kg Oil capacity: 150 l EQUIPMENT - Electro-hydraulic guillotine shear, "swing-beam" type - RAS "MULTICUT-ECO 2000" CNC control unit Movable, front-operated 3-axis control unit with up to 900 program lines Sheet support device for thin sheet cutting, selectable Including piece and cycle counter Selectable operating modes - Front support tables with ball casters - Central, motorized quick blade gap adjustment - 1x RAS extra-long side gauge - 2x RAS extra-long support arms - 1x Free-moving foot switch - 1x RAS pneumatic sheet support device for thin sheets - 1x RAS movable scrap flap - 1x RAS extra blade set for guillotine shear

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 4,060 mm, overall weight: 5,300 kg, type of input current: three-phase, FEATURES Working length: 4060 mm Dsdpfowb Ar Sjx Aduewf Working thickness: 2.5 mm Rear table with spheres 155 additional tools to those present on the machine

Condition: used, machine/vehicle number: ubk., sheet width:6060 mm plate thickness:2 mm total power requirement:7,5 kW weight of the machine ca.:6,75 t Dodpfx Adocxxuqeuowf dimensions of the machine ca.:7,0x2,0x2,5(LxBxH) m

Condition: good (used), RAS screw press - Width: 80 cm - Depth: 60 cm - Height: 150 cm - Weight: approx. 250 kg Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Dodpfx Adetku Ekeuowf Shipping with forwarding agent.

Condition: good (used), Year of construction: 1980, Hydraulic sheet metal bending machine, working length 3000 mm Dwodjw El R Espfx Aduof

Condition: excellent (used), Maximum cutting length: 2040 mm Maximum sheet thickness: 2 mm steel Dwsdjduw Ekepfx Aduof Weight: approx. 1100 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1970, working width: 6,040 mm, sheet thickness (max.): 2 mm, TECHNICAL DETAILS Sheet width: 6,040 mm Sheet thickness: 2 mm Electrical system Total power requirement: 10 kW Dimensions and weight Dwodpfxjwmmbze Aduof Machine weight approx.: 7,000 kg

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar Dwjdpoqzibtsfx Adujf INCLUDED drag loading system

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Dwedpferwxkhex Adujf Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bending on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 23000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 20000 kg Dwedpsv A Tfgjfx Aduef Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal