Used Liebherr for sale (246)

Condition: used, Year of construction: 2010, Liebherr Wheel Loader L 524 Z 2 plus 1? Very nice machine!!! - Original paint - Good equipment - No particulate filter, no AdBlue VIN: VATZ0659VZB024455 Z – Lifting frame Kjdpfey Ritzjx Adyodl Year of manufacture: 2010 – Delivery: 16.11.2010 Indicated operating hours: 10,964 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and intercooling, 118 HP Hydrostatic drive with 3 speed ranges Driving speeds: Range 1: 0 – 6.0 km/h, Range A1-2: 0 – 16.0 km/h, Range A1-3: 0 – 36.0 (40) km/h - Ride vibration damping for lifting frame – boom suspension - Hydraulic auxiliary circuit for high-tip bucket, grapple bucket, silage block cutter, sweeper, etc. - Radio preparation - Air conditioning - Comfort driver's seat with pneumatic suspension - 4 x work lights on the cab roof front - 2 x work lights at the rear - Heated rear window - Battery master switch - Rotating beacon (warning light on the rear top cab roof) - Road approval · Front tires 17.5 x 25 L3 - 40% · Rear tires 17.5 x 25 L3 - 40% Offer includes fixed-mounted bucket 2.0 cubic meters at a price of €42,900 net + VAT ex stock Gemmingen Additional equipment available at extra cost: · Hydraulic quick coupler €3,550 incl. exchange of fixed bucket for quick coupler bucket · High-tip bucket from 2.5 m³ from €4,950 · Bucket with clamp for SW 2.0 cubic meters €3,660 · 4-in-1 bucket 2 m³ on request · Pallet forks 5 or 8 tons from €2,190 Optionally also available with a used scale! Sale only to commercial customers or for export. Sold in as-is condition as seen. No warranty or guarantee. The stated kilometer or operating hours are read off the odometer or hour meter; we do not guarantee or warrant the correctness! Subject to prior sale. The vehicle description does not constitute a binding offer and any information given should not be regarded as guaranteed features. The description and the information provided serve solely for the general identification of the vehicle and do not represent any warranty under sales law. The information is not claimed to be complete. The details, descriptions, and pictures are non-binding and do not serve as guaranteed properties. Only the terms in the order confirmation and invoice are binding. The seller assumes no liability/warranty. The ad may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are happy to consider your trade-in vehicle. If you have further questions, we are at your disposal. For our international customers, we prepare all customs and export documents for smooth transport abroad.

Condition: used, Year of construction: 2006, operating hours: 5,100 h, Liebherr L506 wheel loader with quick coupler and forks. Immediately ready for use. Kdedpfsy Rq U Hsx Adyol

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Kjdpfxjy Ed Nmj Adyedl Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), power: 100 kW (135.96 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 9,296 h, = Additional options and accessories = - PTO = Additional information = Kdsdpfxoy Nllds Adyol Year of manufacture: 2017 Intended use: Construction Drive: Wheel Number of cylinders: 4 Unladen weight: 22,900 kg Bodywork brand: 4 CE marking: yes Technical condition: good Visual condition: good

Condition: used, Year of construction: 2005, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 20th – 22nd May 2026. For more information go online. Ksdpfxey N Aqkj Adyedl

Condition: used, Year of construction: 2010, 2010 Liebherr LTR1060 60 Ton Tracked Crane, BTT Controller, 40.0m Boom, 2.5m Runner, 25.6 Ton Counterweight, 2 Winches, LICCON 2, 700mm Steel Tracks, Retractable Tracks, Hook, Autolube, A/C, WLI. Certificate of origin available. This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 20th – 22nd May 2026. For more information go online. Kdjdpfx Asy N Ancjdyel

Condition: used, power: 190 kW (258.33 HP), Year of construction: 2013, operating hours: 16,426 h, Empty weight: 1 kg Please contact Emal Jaweed for more information Kedpfx Aoyn Nd Tedyedl

Condition: used, Year of construction: 2024, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 20th – 22nd May 2026. For more information go online. Kodpfjy Nzu Uox Adyjdl

Condition: used, Year of construction: 2018, operating hours: 4,760 h, Internal Vehicle No.: G400132 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany For more information please contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Cab damaged Financing example: * Internal Number:         Excavator * Purchase price:                        €124,900.00 * Down payment:  10% * Term:  60 months * Monthly rate:                  €1,901.02 * Final residual value:        €23,380.00 Kdodpfxsy Rb Auo Adyol If you are interested in this offer or would like it customized according to your requirements, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min Kdodpjymf Dasfx Adysl table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, Year of construction: 2023, operating hours: 1,200 h, Equipment: ABS, all wheel drive, Liebherr 504 Compact Year: 2023 Kedpfx Adsylglioysdl Only 1,254 hours Tyres in very good condition Quick coupler Forks + bucket Delivery possible Immediately available ----We gladly arrange financing or leasing EU sale: net price with company documents and VAT ID VAT deposit: €2,000 We speak English We speak Serbo-Croatian Our service for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation available - Transfer from Munich Airport or Passau station

Condition: good (used), functionality: fully functional, Bakery Refrigerator Liebherr BKPv 6570 Kdodpoyhzlmofx Adyjl Stainless steel design For trays 600 x 400 mm Digital temperature display Adjustable temperature range: -5 to 15°C DGUV V3 tested exclusively by us Connection: 230V Used equipment Visit our large showroom!

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) * Radio preparation * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Net price with fixed 2.5 cubic meter bucket: €44,900 Kdjdpfeyqn Hrox Adyel Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately.

Condition: used, Year of construction: 2017, Equipment: all wheel drive, And we managed to get this one as well! Beautiful, clean machine – top equipment! Liebherr L 546 Z 2plus1 Chassis No. VATZ1560CZB045370 Year of manufacture: 2017 Operating hours: approx. 11,263 4-cylinder inline engine, 120 kW / 163 HP, water-cooled with turbocharging, Emission Stage 4 Operating weight: approx. 14,300 kg Machine width: 2,500 mm Kdedpfxeyqn Hxj Adyel Hydrostatic travel drive with 3-speed transmission • Automatic climate control – maintains set temperature • 3rd and 4th hydraulic control circuit for attachments such as high-dump bucket, grapple bucket, etc. • Ride control BSS – lift arm suspension • Liebherr factory-installed central lubrication system • Fluff filter ahead of cooling pack prevents contamination • Coarse-mesh radiator for easier cleaning • Reversible fan for radiator cleaning – reverse operation • Access aid in front of windshield for easier cleaning • Air filter with “TopSpin” pre-cleaner for intake air • Premium touchscreen display • “Comfort” driver’s seat with pneumatic suspension, seat heating, and headrest • Adjustable steering column for height and tilt • Left and right armrests • Tilting window on left driver’s door • Radio • Steel headlamp bracket for front headlights instead of plastic • 4 rear LED work lights on the cab roof • 4 front LED work lights on the cab roof • 2 additional rear work lights on the engine hood • Reversing alarm (audible – beeper) can be switched off • Rear area monitoring camera • Rear tow hitch • Crane lugs front and rear on the frame • Joystick steering and conventional steering • Tyres 20.5 x 25 FA 2 x 40% tread Tyres 20.5 x 25 RA 2 x 40% tread Net price with fixed-mounted 2.8 m³ bucket: €55,900 net plus VAT Optional equipment at extra charge: - Hydraulic quick coupler: €3,550 - Grapple bucket 3 m³: €3,980 - High-volume bucket 5 m³: €3,990 - High-dump bucket from 3–5 m³: from €3,950 - Pallet fork 5 or 8 tons: from €2,190 Available with scales on request: Used scales including installation, e.g. Pfreundt WK 50 or WK 60 from €3,900 (Also available with printer) All prices net export – within Germany plus 19% VAT. We can arrange transport to your location upon request. Sale only to commercial customers or for export. Sold as-is, as seen. No warranty or guarantee. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer, and the details provided do not represent warranted characteristics. The description and information serve solely for general identification of the vehicle and do not constitute a warranty in the legal sense. The details are not guaranteed to be complete. The provided information/descriptions and images are non-binding and do not represent warranted features. Only the stipulations in the order confirmation and invoice are valid. The seller does not assume any liability or guarantee.

Condition: used, Year of construction: 2020, operating hours: 2,720 h, Equipment: all wheel drive, Top machine? Like a demo machine! Only 2,720 operating hours! Liebherr L 538 Z 2plus1 Z-lifting frame Serviced by Liebherr; handed over to the customer on 13.10.2023 with 150 hours. Last service on 24.11.2025 at 2,303 hours. Original paint. Chassis number: VATZ1754EZB 061150 Year of manufacture: 2020 Operating hours: approx. 2,720 Lifting frame with Z-kinematics – Earthmoving version 4-cylinder inline engine, 120 kW/163 hp, water-cooled, turbocharged, emission stage 4 Machine width: 2,500 mm Hydrostatic drive with 3-speed transmission – 40 (36 km/h) Special equipment: * Ride control (BSS) – boom suspension * Central automatic lubrication system factory-installed by Liebherr * Automatic climate control (maintains set temperature) * Access aid in front of windscreen for easier cleaning * Premium touchscreen display * 'Comfort' driver's seat with pneumatic suspension and seat heating * Adjustable steering column * Sliding window on the right * Rear sunblind * Front sunblind * Comfort radio with hands-free system * Safety door opens 180 degrees (rests against cabin wall when open) * Automatic and programmable bucket return * Lowering automation with bucket return when bucket dumped * 3rd hydraulic control circuit for attachments such as high-tip bucket, sweeper, grapple bucket, etc. * 2 rear LED work lights on cab roof * 2 front LED work lights on cab roof * Automatic engine shutdown after 5 minutes idle * Rear fender extensions in rubber * Comfort radio with hands-free system * Swiveling/folding LED beacon * Stainless steel exhaust tailpipe Tyres 20.5 x 25 L3, Front axle: 2 x 50% remaining Tyres 20.5 x 25 L3, Rear axle: 2 x 50% remaining Automatic self-locking differentials, 45% lock rate on both axles Net price with fixed bucket (2.5 m³): €98,900 net plus VAT * Additional equipment available at extra cost: - Quick coupler including hydraulic pre-installation: €3,550 - High-tip bucket 3 – 4 m³ Kdodpfx Aey Eaxqsdyol - 4-in-1 bucket (clamshell, dozer, grading bucket) 2 m³: €3,950 - Volume bucket 5 m³: €3,990 - Pallet forks 5 tonnes from €2,190 (8 t also available) * Also available with scale at extra cost: - Pfreundt WK 60: €5,900 All prices are net export prices, valid VAT number and documents required. Sale only to businesses or for export. Sale as-is, where-is. No warranty or guarantee. Mileage and operating hours as read from odometer/hour counter; accuracy cannot be guaranteed. Subject to prior sale. Vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information given are solely for the general identification of the vehicle and do not represent any warranty under commercial law. No claim to completeness. The information, descriptions, and images are non-binding and do not constitute guaranteed characteristics. Only the stipulations in the order confirmation and invoice are binding. Seller assumes no liability/warranty.

Condition: used, Year of construction: 2020, Equipment: all wheel drive, Liebherr L 538 P 2plus1 Mast: high-lift Year of manufacture: 2020 Operating hours: approx. 13,566 All servicing carried out by Liebherr and documented in the system up to 12,549 hrs as of 16.09.2025. Kdsdsyrznxepfx Adyol 4-cylinder inline engine, 111 kW / 155 hp, water-cooled with turbocharging, emissions Stage IV Operating weight approx. 14,500 kg | Permissible total weight: 17,000 kg Hydrostatic drive with 3-speed gearbox Rear collision protection (reinforced bumper / heavier counterweight) Automatic central lubrication system, factory-installed by Liebherr Automatic climate control—keeps the set temperature automatically 3rd and 4th hydraulic control circuits for attachments, e.g., high-tip bucket, grapple bucket, etc. Ride control (BSS) — mast damping Access aid in front of windscreen for easier cleaning Lint screen to prevent radiator contamination Wide-mesh radiator core for easier radiator cleaning Reversing fan for cleaning radiators (reverse mode) Air filter with pre-cleaner (TopAIR) for pre-filtering intake air Premium display with touchscreen “Comfort” driver’s seat with pneumatic suspension and seat heating Left armrest Steering column adjustable in height and tilt Comfort radio with hands-free function Steel front headlight carrier instead of plastic 2 LED work lights at rear cab roof 2 LED work lights at front cab roof Sun blinds at front and rear Adaptive work lighting incl. additional headlamp on front frame Mast with end position damping Programmable lift and lower automation Tilt cylinder with piston rod guard Automatic engine shutdown after 5 minutes at idle Defects: reversing camera not working, windscreen cracked · Speed limit 20 km/h can be adjusted via Liebherr! Tyres: 20.5 x 25 VA (front axle) 2x 30% * 20.5 x 25 HA (rear axle) 2x 30% Automatic self-locking differentials, 45% locking ratio on both axles Price with quick coupler and standard bucket: €59,900 Available at extra cost: High-tip bucket from 3 to 4.5 cubic meters 4-in-1 bucket (grab/levelling bucket) 2 m³ €3,950 Bucket with hydraulic clamp (grapple bucket) €4,350 High-capacity bucket 5 m³ €3,990 Pallet forks 5 tonnes from €2,190 (optionally for 8 t as well) * Also available with on-board weighing system at additional cost: * Pfreundt WK 50 €3,900 * Pfreundt WK 60 * Prices include installation All prices net for export | Domestic sales subject to 19% VAT. We are happy to arrange transport to your location. Sale only to businesses or for export. Sale as-is, in current condition as seen. No warranty or guarantee. The specified mileage or operating hours are as read from the odometer/hour meter, we do not guarantee their accuracy! Subject to prior sale. The vehicle description is non-binding and should not be regarded as a guarantee of specific features. All details are for general identification purposes only and do not constitute a warranty under sales law. Details are not guaranteed to be complete. All data/descriptions and images are non-binding and do not represent warranted characteristics. Only the terms set out in the order confirmation and invoice apply.

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Beautiful machine - Well equipped - No play in the joints - No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr dealer maintained Special factory paint RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharging, 103 hp Hydrostatic travel drive with 2 speed ranges – max. 32 km/h * Standard Z-bar linkage * Ride control / boom suspension * Hydraulic quick coupler with installation kit * Liebherr factory-installed central lubrication system * 3rd hydraulic control circuit for high-tip / grab bucket / or 4-in-1 bucket * Steel lamp brackets instead of plastic * Rear tow hitch * "Comfort" suspended driver’s seat * Comfort radio * 2 LED work lights at rear of cab roof * 2 LED work lights at front of cab roof * Adjustable steering column * Rotating beacon / warning strobe on the center of the cab roof * Crane / lashing eyes at rear and front frame * Fire extinguisher * Road approval 32 km/h Kdedpfoyqn Hljx Adyjl Tires 17.5 x 25 L3, front axle: 2 tires, 95% tread, like new!! Tires 17.5 x 25 L3, rear axle: 2 tires, 95% tread, like new!!! Permissible total weight approx. 10,500 kg Operating weight approx. 8,500 kg Offer includes quick coupler and 1.6 cbm standard bucket – Price: €46,900 net (export), plus 19% VAT for domestic sales Optional attachments at additional cost: · Folding bucket 2 cubic meters from €3,550 · High-tip bucket · Screening / mixing bucket, manufacturer "Wolf" · 5-ton pallet fork from €2,190 Prices net plus VAT or for export Sale only to businesses or for export. Sale in as-is condition. No guarantee or warranty. The indicated operating hours or kilometer readings are taken from the hour or odometer counter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not represent a binding offer and the details provided should not be regarded as warranted characteristics. The description and information serve only for general identification of the vehicle and do not constitute a legal warranty. Information is not guaranteed to be complete. Any details/descriptions and images are non-binding and do not represent assured properties. Only the stipulations in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment needs to be checked separately if necessary. We gladly accept your vehicle as a trade-in. For further questions, please contact us. For our international customers, we can prepare all customs and export documents for smooth transfer abroad.

Condition: used, Year of construction: 2015, operating hours: 7,829 h, Beautiful machine – top specification! Liebherr Wheel Loader L 542P 2 plus 1 Serial No.: VATZ1269KZB036900 Year of manufacture: 2015 Operating hours: approx. 7,829 Machine delivered: 24/04/2015 Last recorded service: 27/06/2019 at 2,500 hours Liebherr 4-cylinder inline engine, water-cooled with turbocharging and intercooler, 156 HP Hydrostatic drive with 3 speed ranges Travel range 1: 0 – 6.0 km/h Travel range A1-2: 0 – 16.0 km/h Travel range A1-3: 0 – 36.0 (40) km/h * Automatic climate control – maintains the set temperature * BSS ride vibration damper (oscillation damping) * Central lubrication system – Liebherr factory install * 3rd and 4th hydraulic control circuit, e.g. for high tip bucket, grapple bucket, sweeper, etc. Kdedpoyumpmjfx Adyol * Joystick lever lock * Sweeper equipment – with free return line + power socket at loader arm * Reversing camera with monitor in display * Industrial axles with 100% differential lock * Engine air intake via TOP-AIR pre-filter * Access aid for easier cleaning of windscreen (step) * Premium touchscreen display * Comfort driver's seat with pneumatic suspension * Seat heating * Heated exterior mirrors * Steering wheel adjustable in tilt and height * Left-hand opening window in the door * 4 x LED work lights on cab roof front * 4 x additional LED work lights on cab roof rear * Lint screen over cooling pack prevents contamination * Reversible fan for cleaning radiators (fan runs in reverse) * Radiators with coarse mesh for easier cleaning * External coolant pre-heater with 220V plug * Amber beacon, cab roof centre * Battery master switch * Radio with USB * Fire extinguisher * Rear towing coupling * Automatic engine shut-off after 5 minutes at idle speed * Rear bumper/ballast weight reinforced Permissible total weight: 17,000 kg; Unladen weight approx. 15,000 kg Length: 7,200 mm; Width: 2,500 mm; Height: 3,280 mm Tyres: 20.5 x 25 VA L4 – 95% - like new; 20.5 x 25 HA L4 – 95% - like new Offer includes hydraulic quick coupler + 2.8 cbm bucket: €61,300 net * Optional equipment available at extra charge: * High tip bucket from 3 – 5.5 cubic metres from €4,900 * 4-in-1 bucket (grapple/dozer bucket) * Grapple bucket 3 cubic metres €4,350 * High-capacity bucket 5 cubic metres €3,990 * Pallet forks (5 tonnes) €2,190 * Pallet forks (8 tonnes) €3,450 * Also available with onboard scales at extra charge: * Pfreundt WK 50 €3,900 * Pfreundt WK 60 €5,900 All prices are net export/international, plus 19% VAT for domestic customers. Transport to your location can be arranged. Sale to commercial customers or export only. Sold as-is, as seen. No warranty or guarantee. Kilometre and hour readings are based on instrument displays, we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer. The provided information does not represent guaranteed properties/features. Description and details are for general vehicle identification only and do not constitute a warranty in the legal sense. Completeness of information is not guaranteed.

Condition: used, Year of construction: 2010, operating hours: 14,296 h, Equipment: all wheel drive, Internal vehicle number: MK300033 German vehicle Available immediately at our premises in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: MK Kdsdoy I Hf Ajpfx Adysl * Purchase price: €39,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €604.02 * Residual value: €7,380.00 If you are interested in this offer or wish to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to take your used vehicle in part exchange. Financing directly available in-house. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 110,160 km, fuel type: diesel, fuel: diesel, color: other, total length: 12,970 mm, total width: 2,700 mm, total height: 3,820 mm, Year of construction: 1990, Unladen weight: 47,050 kg Damage: none Kdodpfxoyxp Nrj Adysl Reference number: M7

Condition: used, functionality: fully functional, Year of construction: 2007, - Machine in good working condition Kdodpfxoy Rfmqj Adyjl - Immediately available - Including Arden sorting grapple

Condition: excellent (used), power: 200 kW (271.92 HP), fuel type: diesel, color: white, Year of construction: 2015, operating hours: 14,912 h, Equipment: air conditioning, Technical information Track width: 90 cm Empty weight: 51.100 kg Drivetrain AdBlue system: Yes Drive: Track Make of engine: Liebherr D936 Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Identification Serial number: WLHZ1376PZC040720 Other information EPA Marked: yes Delivery terms: EXW Production country: FR Additional information Please contact Christiaan Dekker for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Auto lubrication system - Battery disconnector - Bucket - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit = Remarks = Liebherr R946LC-V Long-Reach Year: 2015 Hours : 14912 Retractable undercarriage : 3800mm --> 3300mm Boom 10300mm Steel 8500mm Shoes 900mm Automatic greasing Extra hydraulic lines Prepared for GPS Kdedpfx Asy Igpzodysl Hydraulic quick coupler & bucket CE & EPA Price Euro. 88.500,-

Condition: used, Year of construction: 2009, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm max. workpiece diameter 1500 mm Control Siemens 840 D table diameter 900 mm Table hole Diameter / depth 320 / 520 mm max. table load 95 kN coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm work-spindle diameter 125 mm tool taper SK 45 DIN Table rpm 12 1/min power requirement 30 kW weight of the machine ca. 24 t dimensions of the machine ca. 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Ksdpfx Adey Dvl Royjdl Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 300 mm - Max. broaching wheel speed: 25 rpm - Cutting speed: 5 ... 50 m/min Equipment/Accessories: - Column lateral adjustment: +/-60 mm - Cutter holder mount: SK 45 DIN

Condition: used, Year of construction: 2019, operating hours: 1,739 h, machine/vehicle number: VATZ1816CZB005765, Power: 46 kW, permissible total weight: 6,300 kg, bucket LIEBHERR 8923732, year of manufacture: 2019, working width: approx. 180 cm, pallet fork, NOTE: Collection possible at a later date, still in use for loading!!! Kdodpfsyztczjx Adyol

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min Kdjdpfx Ajyz Sd Redyol table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *