Used Trumpf for sale (396)

Condition: ready for operation (used), laser power: 4,000 W, total length: 9,300 mm, total height: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: Siemens Sinumerik 840D, net weight: 11,500 kg, total depth: 2,900 mm, Machine is equipped with 5 inch cutting head. Also included is a 7,5 inch cutting head. Workpiece dimensions: 3000 x 1500 mm Hight travel Z-axis: 115 mm Cslqyewdkqno Ng Esgt Max cuttingthickness in steel: 20 mm Max cuttingthickness in Inox: 15 mm Shuttle table: yes

Condition: excellent (used), Year of construction: 2008, Parameter Details Machine Concept: Combined CO₂ laser cutting (TRUMPF TLF 2700-2, 2.4–2.7 kW) + 220 kN punching head in a C-frame Working area: 3,000 mm × 1,650 mm without adjustment Sheet weight: up to 230 kg Material capacity: Punching: 8 mm steel Laser cutting: 8 mm steel / 6 mm stainless steel / 4 mm aluminum Axis speeds: X 90 m min⁻¹ · Y 60 m min⁻¹ Simultaneous: 108 m min⁻¹ Celqyowfgk Hs Ng Eogt Positioning accuracy: ±0.10 mm Tool magazine: Linear turret with 18–19 stations up to 76 mm Ø; active die for scratch-free forming

Year of construction: 2015, Condition: ready for operation (used), Main Drive Celqyowdzags Ng Esgt Laser power 5KW Co2 Additional Equipment Platform installation possible Machine was connected to STOPA Universal large-scale storage system (4x2 metres) Working area 4000x2000mm Closed machine frame with integrated laser unit / Movement unit for high-precision processing / Torque drive in combination with linear direct drives / Closed beam guidance / Single cutting head strategy / Cooling unit Automatic pallet changer in longitudinal direction with extended pallet pull-out / 17” touch factory screen / ergonomic control panel with or screen / Work area lighting / Position laser diode spraying device / PierceLine, FocusLine, NitroLine, PlasmaLine Co2 laser TruFlow 5000 with optimized standby mode / Maintenance-free turbo radial blower / High-frequency excitation / TASC laser control, laser power control, laser logbook function Lens cutting head with 250mm lens / Universal quick-change device (UTI) with bus connection / LensLine with status check / ControlLine: Height control and sheet outer edge detection / Lens with RFID chip Laser ON / beam on 78187h/26610h This TRUMPF TruLaser 3040 was manufactured in 2015. It features a 5KW CO2 laser and has been maintained annually by TRUMPF. It can be integrated with a STOPA Universal large-scale storage system. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3040 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), Functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. Cgelqy Nsvu Syyog Eot TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: used, Year of construction: 2011, operating hours: 30,186 h, Functionality: fully functional, machine/vehicle number: A0215A0156, laser power: 2,500 W, laser hours: 13,800 h, sheet thickness aluminum (max.): 5 mm, sheet thickness steel (max.): 15 mm, total length: 3,078 mm, total height: 76 mm, total width: 1,550 mm, workpiece weight (max.): 575 kg, overall weight: 9,420 kg, type of input current: three-phase, The machine is ready for use and serviced by Trumpf, but no longer connected to the network and is in storage. Cslqov Hmc Tjy Ng Ejgt The price includes a Schmalz lifting device with a load capacity of 500 kg. The machine is sold ex works.

Condition: used, 244600, 7.5"D1.5", Trumpf laser cutting head Cgelqy Noq S Tvusg Est Model: 244600 Condition: Used

Condition: used, Year of construction: 1997, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm table width 120 mm stroke 215 mm dayligth 385 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec air pressure ca. 6.0 bar Number of working hours ca. 24.825 h oil volume 200 l operating pressure 340 bar Cgolqewcrv Ajy Ng Eot total power requirement 11.6 KW weight of the machine ca. 7750 kg range L-W-H 2680 x 2100 x 2375 mm Good/well-maintained condition With only approx. 24.825 operating hours (!!) - in checked conditions - machinevideo - ?v=g7lSpJVNoQU Equipment: - DELEM CNC control model DA 65, pivoting front left - CNC-controlled axis adjustment: * Y1 - Y2 - X - R - I - CNC crowning - CNC electro-motorized backgauge (X axis) * with 4 manually adjustable stop fingers - CNC electro-motorized height adjustment (R axis) - CNC electro-motorized crowning - TRUMPF/WILA electro-hydraulic upper tool clamping - TRUMPF/WILA electro-hydraulic lower tool clamping - CNC pneumatic die shift (I axis) - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (pivoting doors) - Rear safety device (pivoting doors) - Spare parts list + Circuit diagram + CE declaration * Special accessories included: - Brand new drive motor - TRUMPF electric oil cooler for continuous operation Additional technical specifications: - X-axis feed speed: 500 mm/sec. - R-axis feed speed: 300 mm/sec. - Z-axis feed speed: 1000 mm/sec. - X-axis travel range: max. 860 mm - R-axis travel range: max. 250 mm

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Cjlqyswd Ng Ue Ng Eegt Annual maintenance by Trumpf

Year of construction: 2009, Condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Cgolqewdbfcoy Ng Ejt Incl SheetMaster This 3-axis TRUMPF TruLaser 3030 3,2kW CO2 was manufactured in 2009. It's a reliable CO2 laser cutting machine, ideal for precise cutting applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 CO2 laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: reconditioned (used), Year of construction: 2011, operating hours: 25,900 h, Functionality: fully functional, total height: 3,200 mm, installation height: 615 mm, pressing force: 170 t, throat depth: 420 mm, distance between stands: 2,690 mm, bending length: 3,230 mm, Special features: + Front work area lighting + BendGuard + CNC crowning + 6-axis backgauge system with control cabinet air conditioning + Hydraulic upper tool clamping + Optical setup and positioning aid + CNC lower tool shift (I-axis) Standard features: Celqy Newcq S Nog Eegt - Four-cylinder upper drive concept - Electro-hydraulic ram drive with proportional valve technology - Ram travel measuring system with spring compensation via glass scales - Modern block hydraulics - Electronic pressure compensator - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Secure finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool changes - Hardened, hydraulic lower tool holder - Program-controlled lower tool shift (I-axis) for 2 positions - Flat front cover - Modern protective cover, - CE mark - Oil cooler - Control cabinet cooling (air-to-air) - Operating instructions - No bending tools required

Condition: used, Year of construction: 2008, Trumpf TruLaser 5030 - CO2 laser cutting machine + loading and unloading system Laser power: 5000 W Working area: 3000 x 1500 mm - automatic loading and unloading system - Siemens Sinumerik 840 control - Trumpf TruFlow 5000 laser source Cslqy Ngsv A T N Ee Ejgt - Laser power 5000 W - Table size 3000 x 1500 mm - Beam operating hours: approx. 39,449 h - Laser operating hours: approx. 69,119 h - Year of manufacture 2008

Condition: used, 244598, 5"D1, 5", 781, Trumpf laser cutting head Celjq S Tvqeqy Ng Esgt Model: 244598 Condition: Used

Condition: excellent (used), Year of construction: 2014, Operating hours: 40,000 hours 8 kW resonator Colqyswd Ng Ie Ng Eogt including Liftmaster Annual maintenance by Trumpf

Year of construction: 2011, operating hours: 30,000 h, Condition: ready for operation (used), General Data Measurements width 2800 mm Measurements depth 7800 mm Celqy Nowfiixeg Eogt Measurements height 2900 mm Machine weight 10400 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Main Drive Number of axis 2 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 75 mm Workpiece weight 720 kg Max Material Thickness Aluminium 6.0 mm This TRUMPF TruLaser 1030 was manufactured in 2011. A reliable CO2 laser cutting machine, it offers precision in cutting a variety of materials. Ideal for those looking to enhance their cutting capabilities. Contact us for more information. Application Types Cutting

Condition: good (used), Year of construction: 2006, operating hours: 47,000 h, Functionality: fully functional, working range: 2,500 mm, punching force: 76 t, workpiece weight (max.): 120 kg, laser power: 2,000 W, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp Cgslqy Nswcq Hgeg Ejt - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: new, 1679932, TRUMPF, Power Board Tiny (PBT) Cgolqy Nsvrhvxjg Eet Model: 1679932 Condition: New

Condition: good (used), Year of construction: 2008, laser power: 6,000 W, TruLaser 5060 Year 2008 - 6 KW resonator Cgolqy Nsvluxmeg Eet

Year of construction: 2019, operating hours: 901 h, Condition: ready for operation (used), General Data Machine weight 31000 kg Max Material Thickness Steel 3 mm Stainless steel 2.2 mm Aluminium 4 mm This TRUMPF TruBend Center 7030 Bending machine was manufactured in the year 2019 and has 901 production hours. Contact us anytime for further questions Cgjlowfil Tjqy Ng Eot Application Types Bending

Condition: used, Year of construction: 2014, operating hours: 47,500 h, laser power: 6,000 W, laser hours: 32,500 h, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, working range: 3,000 mm, total length: 11,100 mm, total height: 2,600 mm, total width: 4,600 mm, workpiece weight (max.): 900 kg, power: 6 kW (8.16 HP), Special Features: + Loadmaster Standard Features: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive combined with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit - 17" touch color screen - Longitudinal conveyor belt for small parts and waste - Automatic longitudinal pallet changer - Work area lighting - Positioning laser diode - Spraying system - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow 6000 / new generation - Maintenance-free turbo radial blower - Lens cutting head with 250mm lens - Universal quick-change system (UTI) with bus connection - LensLine with condition check - ControlLine: height control and sheet edge detection - SINUMERIK 840D SL - Automatic shutdown - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection Cgolqswcqyasy Ng Eet - CE mark - Light barriers - Multi-chamber extraction system - Without compact dust extraction system! - Complete operating instructions - Lens cleaning case - Transport locks - Crosshairs/measuring bridge

Condition: used, 244598, 5"D1, 5", 788, Trumpf laser cutting head Model: 244598 Cgslqy Neq S Tvmsg Eot Condition: Used

Condition: good (used), Year of construction: 2011, operating hours: 16,500 h, Functionality: fully functional, laser power: 3,000 W, laser hours: 5,100 h, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 6 mm, sheet thickness brass (max.): 6 mm, working range: 3,000 mm, total length: 9,400 mm, total height: 2,600 mm, total width: 3,000 mm, workpiece weight (max.): 900 kg, overall weight: 12,700 kg, input current: 37 A, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: cooling unit, documentation/manual, safety light barrier, Special features: + Cross conveyor belt on the right + Teleservice via Internet + Copper cutting package + Brass cutting package Basic machine equipment: - Closed machine frame - Automatic pallet changer in the longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable (LCC) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt Cjlqjwcql Asy Ng Eegt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF Laser - TruDisk solid-state laser with 1 LLK outlet - LLK according to standard layout (laser directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control CUTTING UNIT - Universal cutting unit with fully adaptive lens system - Single-head cutting strategy - Protective glass to protect against lens contamination - Protective glass condition check - ControlLine: Height control and sheet metal outer edge detection CONTROL - Advanced workshop programming (TruTops via network access) - Fast re-production - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-Shop - USB interface - RJ-45 network connection SAFETY - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Electric retractable roof

Condition: new, 1613166, TRUMPF, DLCA (Digital Laser Ctl Adv) board Model: 1613166 Cgolqstu U D Eey Ng Eet Condition: New

Condition: good (used), Year of construction: 2004, Functionality: fully functional, laser power: 5,000 W, CNC laser cutting system TC L 3050 5000 Watt, with RotoLas Maximum X working area: 3000 mm Maximum Y working area: 1500 mm Maximum Z working area: 115 mm Control: Siemens Sinumerik 840D Laser power: 5000 watts Operating hours: 93,603 hours Laser beam on: 40,516 hours Maximum sheet thickness (steel): 25 mm Maximum sheet thickness (va): 20 mm Maximum sheet thickness (aluminum): Max.: 12 mm Standard Machine Equipment Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive combined with linear direct drives - Enclosed beam guidance - Single-cutting-head strategy - Cooling unit - Automatic longitudinal pallet changer - 17" color touchscreen - Longitudinal conveyor belt - Ergonomic control panel with color touchscreen - Work area lighting - Positioning laser diode - Spraying system - PierceLine - FocusLine - NitroLine - PlasmaLine - Transport and assembly device TRUMPF Laser - TruFlow 3200 CO2 laser with optimized standby mode - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control system - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change system (UTI) with bus connection - LensLine with condition check - ControlLine: height control and outer sheet edge detection - Lens with RFID chip Control - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Advanced workshop programming - Fast re-production - Automatic shutdown - ContourLine - FastLine Cslqyowc S Hho Ng Eegt - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panels - TruFlow 5000 with optimized standby - Lens and nozzle automation technology package (includes nozzle changer, beam alignment, and LensLine with automatic condition monitoring) - Wide cross conveyor belt with tilting container (container to the left of of the machine) - CoolLine

Condition: new, 1779152, TLS 18-12-41 V01, TRUMPF, Power Supply Board Cjlqy Nevrhpxog Eogt Model: 1779152 Type: TLS 18-12-41 V01 Condition: New

Condition: good (used), Year of construction: 2009, Functionality: fully functional, laser power: 4,000 W, TruLaser 3030 (L20) 4000 Watt CNC Laser Cutting System Maximum X working area: 3000 mm Maximum Y working area: 1500 mm Maximum Z working area: 115 mm Control: Siemens Sinumerik 840D SL Laser power: 4000 watts Operating hours: 67,747 hours Laser beam on: 33,925 hours Maximum sheet thickness (steel): 25 mm Maximum sheet thickness (va): 20 mm Maximum sheet thickness (aluminum). Max.: 12 mm Standard Machine Equipment Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive combined with linear direct drives - Enclosed beam guidance - Single-cutting-head strategy - Cooling unit - Automatic longitudinal pallet changer - 17" color touchscreen - Longitudinal conveyor belt - Ergonomic control panel with color touchscreen - Work area lighting - Positioning laser diode - Spraying system - PierceLine - FocusLine - NitroLine - PlasmaLine - Transport and assembly device TRUMPF Laser - TruFlow 3200 CO2 laser with optimized standby mode - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control system - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change system (UTI) with bus connection Cslqy Nswc R Nzog Eogt - LensLine with condition check - ControlLine: height control and outer sheet edge detection - Lens with RFID chip Control - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Advanced workshop programming - Fast re-production - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panels - TruFlow 5000 with optimized standby - Lens and nozzle automation technology package (includes nozzle changer, beam alignment, and LensLine with automatic condition monitoring) - Wide cross conveyor belt with tilting container (container to the left of of the machine) - CoolLine