Used Profi Press for sale (37,197)

Condition: used, Table size: 630 x 490 mm Stroke length: 500 mm Max. thrust: 500 mm Dcslir Tev S Uyqsw Aeg

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, ram adjustment: 70 mm, overall weight: 5,200 kg, pressing force: 75 t, height adjustment type: mechanical, power: 7.55 kW (10.27 HP), Equipment: documentation/manual, Sangiacomo T75 CE Worked in manual mode. Safety doors are included (new-packed) Dcjlir Tev Haafjw Aog

Condition: used, Year of construction: 1988, From a training workshop or government agency Pivoting for long workpieces Used, good condition Make: Gea Type: Kapre 3000 Year of manufacture: 1988 Single-sided from below Press cylinder Heating rails: 1 piece Working length: 3000 mm Pneumatic Mobile Doliowbi Exer Tw Ajcg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Sergiani pass-through baler + automatic loading and unloading Year of production: 1999 Technical condition: very good, machine in working order Technical data: - Working width: 130 cm - Working length 4000 cm - automatic loading and unloading - water-heated press tables Installation and commissioning for an additional fee. Dceliror Eqpfs Tw Aeg

Condition: good (used), Year of construction: 2007, 1 x Omori stretch over wrapper.  Dcoljvin Ehjir Tw Aeg Model - STN-8500.  Date of manufacture - 2007.  Capacity / speed - up to 120 packs / minute.  Pack dimensions - Length: 100-400mm. Width: 80-210mm. Height: 15-90mm.  Power - 3 phase. 

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm Dcslswcdpnjir Tw Aog We have several pieces

Condition: used, Manufactured by: Exner Type: EX 100 SB Table size: 780 x 700 mm Maximum press force: 100 t Delisv S Uxger Tw Aecg

Year of construction: 2020, Condition: as good as new (ex-display), Hydraulic press for tests and retouching of dies Brand: MHG Djlir Tsk Sgvyjw Aecg Model: ER.2S.DM-300/2100 Serial number: 927 Year: 2020 Required power: 40kw Hydraulic oil: 1000Ltrs. deposit + 200 liters. circuit filling Total number of cycles: 403 (NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300t Number of cylinders: 3 Maximum tooling dimensions: 1400x1400mm Maximum tooling mass: 16,000kg Maximum working table and mobile table opening: 1690mm Minimum opening of work table and mobile table: 960mm Maximum mobile table travel: 730mm Approach speed: 92 mm/s Recoil speed: 93mm/s Stop time: 0.2s Safety distance: 500mm Weight with empty tank: 35.000kg

Condition: used, Functionality: fully functional, Various press brake tools Manufacturer = Trumpf and UKB Dcjlir Twswa I Ene Asg Die 16x30°, R1.5mm, total length = 4680mm (in various lengths) Die 10x30°, R1.0mm, total length = 3125mm (in various lengths) Die 24x30°, R2.5mm, total length = 2160mm (in various lengths) Die 50x80°, R5.0mm, total length = 3125mm (in various lengths) UniBend Model 283803, 40°, total length = 3000mm (in various lengths) Punch BIV-053/1-R1/28°, total length = 3640mm (in various lengths) Die with plastic insert 6mm, total length = 3070mm (in various lengths)

Condition: used, HSM V-Press 605 waste paper baler - used The HSM baler is a compact device for reducing packaging waste by up to 95%. It is designed to compact and crush cardboard (paper sacks, waste paper, offcuts) and film (stretch film, plastic sacks). It enables them to be disposed of economically. The waste paper baler has a graphic text display informing of the machine's stage of operation and a large waste loading opening. All this contributes to the comfort of use of the baler and its easy intuitive operation. Advantages of the HSM V-Press 605 baler: - Compact size - contributes to space saving. - Crushing force of 57 kN (approx. 6 tonnes) - allows bales of up to 70 kg with dimensions of 80 x 60 x 60 cm to be formed. - Low noise level - 60.1 dB (A) - Material support claws - increases loading volume and therefore increases baling capacity. - Mechanical ejector - makes bale removal easier. - Large loading aperture - increases user comfort. - Quick and easy assembly. The offer concerns the HSM V-Press 605 waste paper baler: - Manufacturer: HSM - Product condition: used - Year of manufacture : 2018 - Model: V-Press 605 - Width: 119 cm Dcolswcpvaeir Tw Aog - Depth: 81.5 cm - Height: 198 cm - Weight: 485 kg - Power: 1500 w - Voltage: 400 v Net price : €3499.00 each * I have large quantities, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week Dcelieg In Azor Tw Asg We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: good (used), CPM 3000 110kW granulator with conditioner and dispenser Dolirowcdnwe Tw Aecg

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 4341, overall weight: 285 kg, Riveting press Brand: Agme Model: RR-14 Manufacturing series: 7004322 Dolir Tworfwy Io Aecg Manufacturing No.: 4341 Year of manufacture: 2010 Characteristics: Max. diameter 40 kg/mm2: 14mm. Adjustable riveting stroke: 5-50mm. Air pressure: 6 bar. Adjustable riveting time: 0-5 sec. Power circuit: 220/380V. 50/60Hz. Installed power: 1,2Kw Control circuit: 24V DC. Two-hand safety control: Included. Dialogue control 4 languages: Included Parts counter: Included Weight: 285 Kg

Condition: good (used), I have three Simon Heseen V3/150 110kW pelletizers for sale - after general renovation - very good condition - ring matrix 450 mm/109 mm for 8 mm or 6 mm pellets Dolir Twjwcddlj Ascg - 110 kW engine

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Dsleuifr Hjir Tw Aocg Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Condition: excellent (used), Sell pellet/feed granulate coolers Cooler manufactured by Mechanika Nawrocki OCP -15 from 2015 Dcjliswcc Hrer Tw Ajg Made of Kwasówka Cooler with fan

Condition: good (used), Year of construction: 1991, operating speed: 8 mm/s, column diameter: 200 mm, retraction force: 30 t, reverse speed: 40 mm/s, Brand: LoireSafe Year: 1991 Type: Hydraulic Maximum Force: 15-150Tn Return force: 30Tn Movable platen stroke: 1200mm Table dimensions: 2800x1500mm Moving platen dimensions: 2800x1500mm Table displacement stroke: 1500mm Delioudv D Njr Tw Ascg Guided height: 800mm Diameter of columns: 200 mm Height of the table to the floor: 700 mm Power: 11Kw Approach speed: 50 mm/sec. Working speed: 8 to 2mm/sec. Return speed: 40 mm/sec

Condition: used, Year of construction: 2015, Granulator Nawrocki GRB2 750 2x110kW I have two pieces Dcolir Tjwccfbsw Aeg

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) Dcjlir Teu Au U Tjw Asg WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: excellent (used), CPM 7930-4 granulator 160kW engine, possibility of using 250kW engine The granulator worked on pine sawdust Dcslir Twjwca R Ue Asg It has 6mm matrices and rollers for sawdust

Condition: good (used), Year of construction: 2002, overall weight: 9,500 kg, pressing force: 100 t, Model: PREN-100 Year: 2002 Weight: 9.500 Kg Dcelirouif Tks Tw Aeg Rated force: 100Tn Type: Pneumatic clutch eccentric Stop position: 580mm Closing height: 450mm Maximum flywheel RPM: 500mm Travel: 13-130mm Max. carriage adjustment: 80mm Motor: 11 Kw 380 V 50 Hz Min. air pressure : 3,5 - 6 bars Stopping time: 285ms Safety distance: 486 mm

Condition: like new (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 80983, Used hydraulic cnc press brake Brand: HACO Model: ERM 60225 Year: 2000 Serial No.: 80983 Characteristics: Numerical control NEW: Cybelec Cybtouch 8 3 axes (Y1, Y2, X) Force: 225tn Delir Tsr En Snsw Ascg Bending length: 6,000mm Distance between uprights: 5050mm Neckline: 300mm Opening: 450mm Fast lowering speed: 80mm/s Motor: 18,7KW Weight: 29.500kg Includes 60mm cradle at 6 meters. Standard 88º punch at 6 meters.

Condition: good (used), Year of construction: 1998, pressing force: 150 t, working length: 3,100 mm, stroke distance: 215 mm, Completely rebuilt machine. New Cnc: Step Automation Rock 15 (Touch Screen and 2D) Bending length: 3100mm Force: 150tn Dcjlirouc Txze Tw Aeg 6 axes (Y1, Y1, X, R, Z1, Z2) Travel/Travel: 215mm Delivered with complete set of 3 meters of punches and dies. *Machine in the process of retrofitting, new cnc to be installed.

Condition: excellent (used), Year of construction: 1997, Brand: AXIAL Model: PHA-909 Serial number: 970909002 Year: 1997 Folding length: 3050 mm Distance between uprights: 3000 mm Folding force: 90 tn Retraction force: 15 tn Adjustable stroke: 7 – 150 mm Gooseneck: 300 mm Table width: 140 mm Table – beam distance: 350 mm Approach speed: 100 mm/sec Working speed: 8 mm/sec Rising speed: 45 mm/sec. Engine power: 5.5 HP Manual millimetric back gauge Dcjljvlh Tdjir Tw Aog Accessories: - 75x75mm multi V die at 3100mm - Ajial kickstand punch at 3100mm

Condition: good (used), Year of construction: 1974, pressing force: 100 t, Model: OB1 Pressing force: 100Tm Torque: 3500kg Plate thickness: 10mm Dcelir Tjudwr Uew Aog Pusher slider: 5-159mm Distance between table and spindle/pusher: 530mm Max. spindle/pusher travel: 130mm Strokes per minute: 53