Lazy Susan Rotary Table

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, repeat accuracy: 0.06 mm, empty load weight: 1,155 kg, number of axes: 6, Auction of a package of 4 KUKA KR 200 robots! The machines have been fully overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload: 200 kg Arm reach: 2,400 mm Number of controlled axes: 6 Working envelope: 38.6 m³ Positional repeatability (ISO 9283): ± 0.06 mm Range of motion: A1: ±185° A2: -142° / 0° A3: -120° / 148° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load): A1: 90 °/s A2: 85 °/s A3: 85 °/s A4: 117 °/s A5: 120 °/s A6: 195 °/s MACHINE DETAILS Controller model: KRC2 Weight per robot: 1,155 kg Noise level: < 75 dB Klodpox Syktofx Ad Nsl Tilt angle: ± 5° Ambient temperature (operation): 10 °C to 55 °C Ambient temperature (storage/transport): -40 °C to 60 °C INCLUDED EQUIPMENT Manipulator KRC2 control cabinet Teach pendant Cable sets

Condition: new, new ! all stainless steel capacity 200 L. mobile 40 kg quality Klodpfx Adsu A R U As Nsl According to DIN 9797

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements Ksdpfx Adex Syivj Nsll - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,826 mm, controller model: KRC4, repeat accuracy: 0.08 mm, number of axes: 6, The machine has been completely overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload: 360 kg Arm reach: 2,826 mm Position repeatability (ISO 9283): ±0.08 mm Number of axes: 6 Additional load capacity max.: Rotating column: 550 kg Link arm: 130 kg Arm: 150 kg Range of motion: A1: ±185° A2: −130° / +5° A3: −110° / +162° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load): A1: 103°/s A2: 94°/s A3: 100°/s Kodpfx Adex Syg Is Nell A4: 117°/s A5: 110°/s A6: 163°/s MACHINE DETAILS Control model: KRC4 Dimensions & weight Base area: 968 × 944 mm Robot weight: approx. 1,660 kg EQUIPMENT Manipulator KRC4 control cabinet Complete cable set Teach pendant

Condition: ready for operation (used), Year of construction: 2014, Two high-precision Wipotec checkweighers are available. 1) Wipotec OCS/EC, year of manufacture: 2014, throughput: 150 products/min, max. belt speed: 0.75m/s, weighing range: 200g-300g. 2) Wipotec OCS/HC-A-200, year of manufacture: 2014, throughput: 200 products/min, max. belt speed: 1m/s, max. weighing weight: 750g. Documentation available. On-site inspection is possible. Klsdpfx Adewa Ti Es Njl

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Kljdpfsx Srklox Ad Njl Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 9,874 h, bending force (max.): 173 t, working width: 4,250 mm, stroke length: 600 mm, throat depth: 420 mm, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Kedpfxjx R S S He Ad Nsll Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Technical Data Kodpfowri Uzox Ad Nsll Product number VS 20 RH Year of manufacture 2008 Chamber size 920x550x280 mm Sealing bar length 1 x 920 mm and 1 x 680 mm Efficiency for packages 1-3 / min Weight: 450 kg Power supply 400V 5N Cryovac belt vacuum machine, model VS20RH, serial number SN01016, year of manufacture 2008, 400 V, 50 Hz, 40 A, 13 kW, belt width 500 mm, seal length 960 mm and 680 mm, chamber dimensions 990 mm x 550 mm The Cryovac automatic belt vacuum packer is designed for packing fresh meat, meat products and cheese for further industrial processing. The machine has a simple and solid construction. Designed with ergonomic safety and hygiene requirements in mind, the machine is easy to use, clean and maintain. Machine after major service New vacuum sensor The machine achieves a vacuum of 1 mBar in the chamber, i.e. 99.9% vacuum

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Kledpsx Trm Asfx Ad Nel

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Klsdpfex Trlrsx Ad Nel Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: ready for operation (used), Professional meat bins tipper. The device is designed for a power supply of 3 x 400 V, +N /PE, with a power rating of 0.37 kW. Its compact dimensions make it ideal for use in food processing plants, especially where precision and reliability are important. Klodpewiv Ayofx Ad Njl Dimensions: Width: 140 mm Depth: 100 mm Height (tipper lowered): 132 mm Height (tipper raised): 210 mm Total height with tipper raised: 225 mm The robust construction and proven technology of the Danish manufacturer guarantee a long service life and safe operation. The device is ideal for use with transport and loading systems in the meat, fish, and vegetable industries.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Width: min. 900 mm – max. 2,200 mm Kodpfx Adex Trdno Nell Weight: max. 50 kg Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The print heads of the machine need to be replaced. The seller can provide a complete service for this.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, controller model: DC241 EEC, workpiece height (max.): 3 mm, swivel angle A-axis (max.): 105 °, swivel angle B-axis (max.): 180 °, As-new Hexagon Global S Blue Coordinate Measuring Machine! TECHNICAL DETAILS Probe Interface (CMM): TKJ Probe Weight: 350 g Total Weight: 480 g Measuring Performance Probing Force: 5 µm Measuring Range: 2 mm Maximum Measuring Distance: 14 mm Resolution in Z-Axis: 66 nm Lateral Resolution: 6 µm Angular Acceptance: ±30 ° Max. Measurable Thickness: 3 mm Spot Diameter: 12 µm LED Area Light Illuminated Area: 780 × 780 mm Overall Dimensions: approx. 860 × 840 × 20 mm Weight: approx. 19 kg Load Capacity: max. 50 kg Stylus Shank Diameter: 3 mm Shank Length: 50 mm Ruby Ball Diameter: 5 mm Thread: M3 Angular Rotation Steps: 2.5° A-Axis: ±105° B-Axis: ±180° Rotation Speed: 90° in 2.5 s Max. Extension Length: 450 mm Recommended Drive Torque: max. 1.4 Nm Positioning Repeatability: 0.5 µm at 100 mm from the A-axis center MACHINE DETAILS Kedpfx Ajx Sx Nusd Nsll Control System: DC241 EEC Control Compatibility: HH-C-V2.0, HH-CA-V2.0 with HR-R automatic probe changer rack Electrical Data Supply Voltage: DC 5 V to 6 V Current Consumption (normal): 50 mA Current Consumption (min): 30 mA Current Consumption (max): 150 mA (pulsed) Protection Class: IP40 (IEC 60529) Temperature Range: 16 °C to 26 °C EQUIPMENT Windows 10 Operating System Interactive 3D Graphical Capability Computer-Simulated Measuring Machine Environment Bidirectional Interface to CAD Systems: IGES, VDA, DXF, and STEP Processing of 2D, 3D, wireframe, and surface models Curve and Surface Scanning (CurveAnalyzer) Includes PC-DMIS-SHEETMETAL Functions for measuring thin-walled components Automatic White Light Probe – TKJ 2.5 HP-OW-2.14 Sensor Kit, incl. controller and reference sphere, Ø 30 mm, ceramic matte HP-SX1H Scanning Probe Sensor LED area light for mounting on the coordinate measuring machine Reference price mechanical frame for supporting the area light HP-CTS5.10 Optical Sensor HP-S-X1C/H Stylus Holder (1× M3) HH-C-V2.1 Controller HR-OW-2.14 Short End Cap HR-R3 Sensor Acceleration HH-CA-V2.0 Interface Active Probe Rack, HR-RA-65 HR-X1-3P Stylus Rack Reference Sphere, Ø 60 mm, ceramic, with stand M3 Stylus (R-5-SS-3.50) Stylus Tray Computer & Software PC-DMIS CAD++ PC-DMIS Operator Interface with order system PC-DMIS CWS Interface PC-DMIS Probe Change Support Software PC-DMIS Vision for Tactile Sensors Touchscreen including computer system Desk for computer system

Condition: used, Soco Powered roller conveyors roller conveyor 1980-670-610 RA2021 Make: Soco Roller width (RB): 610mm, Rubber rolls Nominal/outer width (NB): 670mm length: 1980 mm Rolls diameter: 50 mm Roller distance 60790/120 mm Overall height frame: 180 mm Drive: Nerimotori Power: 0.37 kW Scope of delivery: without supports Motor segments can be combined with overdrive segments, so one motor can be used to drive several overdrive segments. Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Kljdpsk Abuqjfx Ad Nel Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,857 h, functionality: fully functional, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Z-axis travel: 180 mm Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT Worktable with traverse Auxiliary unit for heavy parts Kodpex Sri Ijfx Ad Noll Pneumatic clamps for door and window production Vacuum pump 250 m3/h Automatic lubrication Waste conveyor