Sell machine Sell
Watch list (0) Login
Menu
  2. Material handling
  3. Storage tanks
  4. Listing ID: A299-0836
Home Page Material handling Storage tanks Listing ID: A299-0836

30,000 liters AHL/ASL tank liquid fertilizer

Year of construction
2000
Condition
Used
Location
Warstein Germany
30,000 liters AHL/ASL tank liquid fertilizer
30,000 liters AHL/ASL tank liquid fertilizer
30,000 liters AHL/ASL tank liquid fertilizer
more Images
Show map
Show images
Show map

Machine data

Machine type:
30,000 liters AHL/ASL tank liquid fertilizer
Year of construction:
2000
Condition:
good (used)

Price & Location

Location:
Enkerbruch 2, 59581 Warstein, Deutschland Germany
Call

Details about the offer

Listing ID:
A299-0836
Update:
23.05.2024

Description

Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act .


Dear Sir or Madam,
we offer a 30,000 liter double-walled storage tank for the storage of liquid fertilizer as follows .

The storage tank is equipped from the inside with a brand new plastic inner shell ,
resistant to the storage of liquid fertilizer equipped .
An acoustic leakage warning device is mounted outside in a protective box (lockable).
The storage tank additionally still double-walled steel.

The plastic inner shell has a general building approval .
And is therefore suitable and approved for the storage of liquid fertilizer AHL as well as NOX reducing agent AUS32
AdBlue suitable and approved .


Nominal capacity 30 cbm
piece 1
used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted
Color equipment lacquer RAL ; . However, you can always bring your own color wishes.
Material steel in steel, material S235JRG2
Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate
Piece. 1 dipstick
Piece. 1 venting spigot
piece. 1 filling nozzle 3 inch V2a stainless steel new installed
Piece. 1 new acoustic leakage warning device for the double wall
Nsdpjc Nk Dyjfx Ah Nswf
piece. 1 ladder
piece. 1 suction line 3 inch V2A stainless steel new installed.
Form . cylindrical storage tank with feet/console


tank mass length ca 6.740 mm

diameter ca 2.500 mm

Weight approx. 6.500. kg

Storage above ground


Top on offer . Liquid fertilizer - AHL tank systems in the size of 5,000-100,000 liters.
Water tanks firefighting water tank .



Of course you can also design your tank system!

All our installations are extensively checked and inspected in our company by selected employees.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.
Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Could we convince you of our offer?

If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you.


Price/ Shipping

The price for the gas station is valid ex location Warstein, free loaded.
Delivery can be offered at a reasonable price for an additional charge.
Delivery time = immediately


You will receive an invoice with VAT.

In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away.

With kind regards
from Warstein

Tank and environmental protection Wozniack
Enkerbruch 2
59581 Warstein

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2015

36 listings online

Call

Send inquiry

Countryus 
Germany
Austria
Switzerland
United States
Great Britain
France
Belgium
Spain
Mexico
Italy
Netherlands
Poland
Russian Federation
Belarus
Ukraine
Estonia
Turkey
New Zealand
Ireland
Czech Republic
Denmark
Finland
Sweden
Norway
Luxembourg
Greece
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Macedonia
Bosnia and Herzegovina
Israel
Egypt
Morocco
India
Indonesia
South Korea
Japan
Thailand
Malaysia
Vietnam
China (People's Republic of China)
Taiwan
Iran
Bangladesh
Note: Your inquiry will be forwarded to all sellers in this machine category. This allows you to receive a large number of offers.
The inquiry could not be sent. Please try again later.
Privacy statement

Telephone & Fax

+49 2902 ... show
Fax:
These listings may also fit your interest.
Auction
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Ends in 
d  h  min  s  Auction ended
Poland Województwo wielkopolskie
8,115 km
Machining center
WeekeOptimat BHC 750 Swiss Profiline
buyer-protection
€7,500
To the auction
Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Working area X-direction: 200 - 3,250 mm Working area Y-direction: 70 - 1,220 mm Working area Z-direction: 12 - 125 mm (clearance 150 mm) Number of tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software EQUIPMENT 4-axis Console table 8 supports in X, manually adjustable 3 vacuum suction cups per console Vacuum connection for templates Laser positioning aid for vacuum suction cups Laser projection for positioning the suction cups Liquid circulation cooling Operator terminal Note: Sale does not include the adapters, tools, and HSK holders shown in the images. Nwjdey A N Ucopfx Ah Nef
See details
Auction
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
CNC turning and milling center Mazak Integrex e-500 HS U1500
Ends in 
d  h  min  s  Auction ended
Germany Rheinland-Pfalz
7,755 km
CNC turning and milling center
MazakIntegrex e-500 HS U1500
buyer-protection
€50,000
To the auction
Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Nwjdpfx Ahsy Akpns Njf Turning length: 1,524 mm Turning diameter: 820 mm Travel X-axis: 870 mm Travel Y-axis: 500 mm Travel Z-axis: 1,598 mm Main spindle Max. spindle speed: 3,300 rpm Main spindle drive power: 30 kW / 22 kW Max. torque main spindle: 588 Nm Main spindle nose: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Sub spindle Max. spindle speed: 3,300 rpm Sub spindle drive power: 30 kW / 22 kW Max. torque sub spindle: 588 Nm Sub spindle nose: A2-11" Indexing: 0.0001 Milling spindle Milling spindle drive power: 37 kW Max. torque milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min MACHINE DETAILS Control: Mazatrol 640M PRO Tool holder: SK50 Number of tool stations: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required floor space (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Infinitely variable speed adjustment 120-position tool magazine High-pressure coolant 70 bar Renishaw Laser measuring system for rotating tools Interface set Air / water cooling through the spindle Overload monitoring system Mayfran Consep 2000 chip conveyor SMW quick-change chuck
See details
Auction
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Turning automatic lathe Traub TNL 26
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,931 km
Turning automatic lathe
TraubTNL 26
buyer-protection
€7,000
To the auction
Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Nedoyzxp Tepfx Ah Nowf Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm
See details
Auction
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Edge banding machine with return system Homag KAL 310 + TFU 140
Ends in 
d  h  min  s  Auction ended
Great Britain Northern Ireland
6,680 km
Edge banding machine with return system
HomagKAL 310 + TFU 140
buyer-protection
€9,500
To the auction
Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Nwodpfeyzxa Eex Ah Njf Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140
See details
Auction
Centerless grinding machine Microrex 1H
Centerless grinding machine Microrex 1H
Centerless grinding machine Microrex 1H
Centerless grinding machine Microrex 1H
Centerless grinding machine Microrex 1H
Centerless grinding machine Microrex 1H
Centerless grinding machine Microrex 1H
Ends in 
d  h  min  s  Auction ended
Romania Județul Dolj
9,099 km
Centerless grinding machine
Microrex1H
buyer-protection
€27,500
To the auction
Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Nedsyym Emspfx Ah Njwf Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg EQUIPMENT New coolant tank with paper filtration system
See details
Auction
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Waterjet cutting machine OMAX MAXIEM 1515
Ends in 
d  h  min  s  Auction ended
Hungary Hungary
8,599 km
Waterjet cutting machine
OMAXMAXIEM 1515
buyer-protection
€22,500
To the auction
Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,795 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, pump power: 2,200 W, The machine was overhauled in 2026 and serviced every 500 operating hours! TECHNICAL DETAILS Working area X-axis: 1,500 mm Working area Y-axis: 1,500 mm Cutting capacity steel: 120 mm (recommended: 60 - 80 mm) Cutting capacity aluminium: 120 - 200 mm Cutting capacity plastic, stone etc.: unknown MACHINE DETAILS Pump output: 22 kW (30 HP) Last pump overhaul: 3 operating hours ago EQUIPMENT Nedpsyzz N Ajfx Ah Nowf Spare parts Computer Water softening system
See details
Auction
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Band saw HEMA UH 630/L
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,984 km
Band saw
HEMAUH 630/L
buyer-protection
€7,000
To the auction
Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Deflection pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw band length: 4,700 mm Loading height: 1,065 mm Cutting height: 350 mm Cutting width without rip fence: 610 mm Cutting width with fence: 150 mm Cutting speed: 10 - 100 m/min Table travel: 600 mm Table feed speed: 0.03 - 0.3 m/min MACHINE DETAILS Extraction connection diameter: 1 x 120 mm + 1 x 100 mm Required air velocity: minimum 25 m/s Required air volume flow: 1,725 m³/h Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,200 x 2,300 mm Machine weight: 550 kg Motor power: 0.75 kW Operating voltage: 400 Volt / 50 Hz Power supply: 3 x 400 Volt Fuse protection: maximum 16 Amperes Minimum cross-section: 1.5 mm² Nwedeyzy Drspfx Ah Njf
See details
Auction
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Mobile robotic system Stäubli MRS-TX2-90
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,984 km
Mobile robotic system
StäubliMRS-TX2-90
buyer-protection
€7,000
To the auction
Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: H18/X2090/202/00162, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum rotational speed: 16.8°/s Maximum linear speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 – 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 System protection rating: IP20 Average floor surface pressure max.: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool parking station: 4 tools per station Tool changing system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic signals: 4 LED units, storage for up to 16 audio files Nwjdpfx Ahjyzyxcj Nof
See details
Auction
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Industrial robot KUKA KR 210
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,984 km
Industrial robot
KUKAKR 210
buyer-protection
€5,500
To the auction
Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 635949, load capacity: 210 kg, arm reach: 2,696 mm, repeat accuracy: 0.06 mm, number of axes: 6, TECHNICAL DETAILS Payload: 210 kg Arm reach: 2,696 mm Outreach: 2,696 mm Axes: 6 Repeatability: 0.06 mm MACHINE DETAILS Control cabinet dimensions (L x W x H): 800 x 560 x 1,060 mm EQUIPMENT Robot Control cabinet Cables Njdoyzyvhopfx Ah Nswf Teach pendant
See details
Auction
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Universal machining center HERMLE C 40 UP
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,984 km
Universal machining center
HERMLEC 40 UP
buyer-protection
€58,500
To the auction
Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK Nwjdoyzyttjpfx Ah Nef - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160
See details
Preview Trust Seal

Werktuigen Trust Seal

What is the trust seal?

Werktuigen certifies selected sellers with the Werktuigen trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Werktuigen staff.

  • What do we verify?

    Trade licence>

    Check of
    trade licence or commercial register extract

    Postal address>

    Verification of the dealer's
    postal address

    Bank details>

    Validation of the
    banking details

    Availability>

    Verification of
    accessibility     to
    main phone number

    Credit report>

    Credit report
    may not contain negative criteria

    Customer complaints>

    Buyer complaints
    can lead to withdrawal of the seal

  • What does this mean for you as buyer?

    The Werktuigen trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.

    Disagreements may of course still arise during the purchasing process. Werktuigen is not liable for any legal violations by buyers or sellers active on Werktuigen.