Baking oven

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Ledpozzlh Hefx Ai Reag Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg Laedpfx Aozzlhaei Rog EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Laedpfx Aiozzkvco Rog Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Lodpfxszzkt Ue Ai Rsag Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Laodpfxjzy Ikno Ai Rsg Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm MACHINE DETAILS Control system: Hurco WinMax V11 Machine weight: 5,000 kg EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Lsdjzyay Ispfx Ai Reag Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) 1 x Latz stretch wrapper The lines include various roller conveyors. Laodpfxszzn I Aj Ai Rjg The machines will be dismantled in week 38. TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Roller conveyors Latz stretch wrapper

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. TECHNICAL DETAILS Laodpfx Aszzny Sei Reg Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Wiring diagrams Operating manual

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 Lsdpjzzmw Nofx Ai Reag VSD speed control Further technical data can be found in the attached data sheet.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Laedpfjzy Hx Djx Ai Reg Technology cycle "Alternating Speed" Further technical data can be found in the document attached!