Strong plastic crates, boxes.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, spindle speed (max.): 18,000 rpm, Submitting a bid commits you to collecting the item by July 27, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,600 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 820 mm B-axis: -100 to +100 degrees Spindle speed max.: 18,000 rpm Taper: HSK-A63 Power: 0.8 - 25 kW Tool magazine: 30 slots Tool weight max.: 6 kg Tool length max.: 250 mm Tool diameter max.: 100 mm Hfedpfx Acszkapkshsi Tool diameter with empty secondary position max.: 130 mm Total weight of all tools max.: 180 kg Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Feed rate X/Y/Z max.: 20,000 mm/min Table size: 4,200 x 900 mm Table load: 4,200 kg T-slots: 9 with a center distance of 100 mm MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Operating hours (according to the latest service report) Operating hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT 5-axis machining with NC swivel milling head (B-axis) Linear drive in the X-axis

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Hodpjt Uzitefx Achsfi ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0294898, functionality: fully functional, operating hours: 20,000 h, pressing force: 100 t, ram plate length: 3,300 mm, total length: 3,800 mm, total height: 2,500 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Stroke length: 3,300 mm MACHINE DETAILS Operating hours: approx. 20,000 h Dimensions & Weight Machine dimensions (L x W x H): 3,800 x 2,000 x 2,500 mm Machine weight: 8,000 kg Hjdpfxozhlnte Achjfi EQUIPMENT Tools

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, overall weight: 16,000 kg, controller model: Cybelec DNC 800, working width: 3,000 mm, bending force (max.): 160 t, distance between stands: 2,650 mm, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm Hfedpfx Acszk A Ivjhoi MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  Electrical panels for tanks and pumps Stainless steel tank | model DFF99 | 2000 | 25,000 liters Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters 4x Fermentation tank | 3,000 liters 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters Open tank Low tank | model STORK TGSW Filter | model PSF JB 014 350143 | 2017 Grinder | model OOEHLER OL 6000 | 2016 Silo and feeder Resistance tank | model PROMINOX | 2016 | 3,000 liters 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters Filter tank | model PROMINOX | 2016 | 4,500 liters 2x Pump | model MIM GRUP FL31Cl Pump | model CALPEDA MXH 204/A Industrial scale | model GRAM MISSIL F2-60 Pump | model LOWARA HTB 32-125/30 Pump | model ABB INOX MIM GRUO FLUID-102 Industrial sink Refrigeration chamber Pump | model PYD SH2-40 Osmosis system | model HIDROTEC Water treatment system Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 Compressor | model INGERSOLL-RAND 11BAR | 2001 Boiler | model ATTSU RL-400/12 Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999 Hfodotzg H Depfx Achei

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The printing machine consists of the following modules: OCE PAPER INPUT MODULE STANDARD B1 OCE INPUT INTERFACE MODULE B1 OCE PAPER INPUT MODULE OPTIONAL B1 OCE OCE IHCS2.1 SETFIN B2 TECHNICAL DETAILS Dimensions Pal 1051330: H: 114 cm, W: 72 cm, L: 95 cm Dimensions Pal 1051331: H: 113 cm, W: 72 cm, L: 56 cm Dimensions Pal 1051237: H: 147 cm, W: 130 cm, L: 160 cm Dimensions Pal 1051238: H: 192 cm, W: 74 cm, L: 119 cm Hodpfx Ajzkhl Tjchsfi MACHINE DETAILS Counter readings according to the previous owner’s information, not verified and without warranty. Counter reading B/W A4: 458,756 Counter reading Duplex B/W A4: 939,266 Counter reading B/W A3: 151 Counter reading Duplex B/W A3: 5,677

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Auction of a Kornit Allegro textile printer! The machine is still operational and available for inspection in the Greater Paderborn area until calendar week 30. After disassembly in calendar week 30, the machine will be stored. The machine will be made available for free loading in the Greater Wuppertal area. EQUIPMENT ACS dryer Material feed Material take-up Caldera RIP software The following technical data is based on the manufacturer's specifications. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Max. media thickness: 15 mm Max. roll width: 180 cm Max. roll outer diameter: 40 cm Max. roll weight: 50 kg Compressed air: 6-8 bar / < 0.4 m³/min MACHINE DETAILS Hedpjzkvh Asfx Achsfi Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Black, Red, Green, Gray, Cyan, Magenta, Yellow Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pretreatment) Print width up to 180 cm Print speed: Up to 200 m²/hour Resolution: 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes using staggered line printing Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feeding system: Axial unwinding device with adjustable fabric width and tensioning mechanisms Weight: 3500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 836 h, machine/vehicle number: ME108831, power: 1.2 kW (1.63 HP), load capacity: 200 kg, lifting height: 10,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 10,000 mm Hfedpfx Aceziz Tuehji Maximum load capacity: 200 kg Maximum lateral load: 400 N Maximum permissible inclination: 3° MACHINE DETAILS Operating hours: 836 h Total weight: 2,735 kg External reference: SL16147SP

Condition: like new (used), functionality: fully functional, machine/vehicle number: 130201150, Year of construction: 2021, operating hours: 82 h, load capacity: 3,000 kg, lifting height: 4,600 mm, free lift: 1,565 mm, fuel type: electric, mast type: triplex, construction height: 2,280 mm, No minimum price – guaranteed sale to the highest bidder! Four-wheel forklift in like-new condition with only 82 operating hours! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,600 mm Free lift: 1,565 mm MACHINE DETAILS Mast type: Triplex ISO class: 3 (2,500 - 4,999 kg) Operating hours: 82 h Fuel type: electric Battery voltage: 80 V Battery type: Lithium-ion Overall height: 2,280 mm EQUIPMENT Charger Side shifter 3rd valve 4th valve Hfjdpfx Ajziza Ujchoi External reference: SL16312SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517333N00008, Year of construction: 2024, operating hours: 3,881 h, load capacity: 5,000 kg, lifting height: 5,587 mm, free lift: 1,590 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, No minimum price – guaranteed sale to the highest bidder! Diesel forklift with only 3,881 operating hours! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,587 mm Hfjdpfx Acjzizazshsi Free lift: 1,590 mm MACHINE DETAILS Mast type: Triplex Fuel type: Diesel Operating hours: 3,881 h Overall height: 2,350 mm EQUIPMENT Camera Side shifter 3rd valve Heater Full cabin External reference: SL17763SP

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain TNC 530, TECHNICAL DETAILS Work Area Table surface: 2,300 x 1,600 mm T-slots: 22 mm Distance between T-slots: 200 mm Workpiece weight with optimal distribution: max. 6,000 kg/m² Distance between columns: 2,700 mm Distance between table surface and spindle center: max. 1,220 mm Travel / Axes Travel X-axis: 2,200 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,000 mm Feed rate X/Y-axis: 0 - 60 m/min Feed rate Z-axis: 0 - 40 m/min C-axis rotation: ± 370° A-axis rotation: ± 105° A-axis torque: max. 830 N·m C-axis torque: max. 1,200 N·m Milling Head / Spindle Milling head: TOE 29 T, 5-axis orthogonal milling head Spindle connection: HSK 63 A Spindle power: 29 / 37 kW Spindle torque: 92 / 115 Nm Spindle speed: max. 20,000 rpm Constant torque range: 0 - 3,000 rpm Hfjdpfxezhnk Do Achoi Tool Changer Tool changer: Automatic tool changer Tool holder: HSK 63 A-100 Magazine capacity: 42 stations Tool diameter: max. 80 mm Tool length: max. 350 mm Tool weight: max. 8 kg MACHINE DETAILS Control model: Heidenhain TNC 530 Cooling / Measuring Systems Tool coolant supply through the spindle: 20 bar Coolant flow rate: 25 l/min Measuring system X/Y/Z-axis: Heidenhain glass scales Measuring system C-axis: Heidenhain angle measuring system EQUIPMENT Heidenhain TNC 530 CNC control 5-axis orthogonal milling head TOE 29 T Electro spindle HSK 63 A Automatic tool changer with 42 stations Tool coolant supply through the spindle Laser tool presetting BLUM Heidenhain glass scales on X, Y and Z axes Heidenhain angle measuring system on the C-axis Thermal insulation and stabilization of the crossbeam Central lubrication 2 chip conveyors Portable handwheel Heidenhain HR 520 15" TFT color monitor with soft keys Full enclosure with CE safety standard Control cabinet with air conditioning Rinsing gun Sliding roof for loading and unloading Note: The operating hours can be found in the last picture.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 1,298 kg, load capacity: 120 kg, arm reach: 3,900 mm, controller manufacturer: KUKA, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Axles: 6 Load capacity: 120 kg Reach: 3,900 mm Availability: 99.9% MACHINE DETAILS Robot controller: KUKA Controller protection class: IP54 Robot protection class: IP64 Hfodpfx Aszg Dz Nschoi Robot base height: 1,500 mm Weight: 1,298 kg