Large air conditioner

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,000 h, functionality: fully functional, turning diameter: 309 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 89 mm, travel distance Z-axis: 406 mm, controller model: Fanuc Typ 18i-T, TECHNICAL DETAILS Maximum turning diameter: 309 mm Spindle speed range: 25 – 6,000 rpm Travel in X-axis: 89 mm Travel in Z-axis: 406 mm Collet diameter: 42 mm MACHINE DETAILS Control system model: CNC Fanuc Type 18i-T Bedpfx Aezu Rz Eommedg Spindle motor drive power: 11 kW Operating hours: 28,000 h Machine weight: approx. 5,000 kg EQUIPMENT C-axis Y-axis 12-station turret VDI 30 Powered tools at each station Power chuck, diameter 140 mm Hydraulic steady rest Workpiece collection system Chip conveyor Coolant system

Year of construction: 2005, condition: good (used), Sanyo SPW-XDR94GXH56(B) Variable Refrigerant Flow Semi Concealed 4-way air discharge Capacity : Cooling :2.80kw Heating 3,20kw Air-circulation (High) 900 phase 1. 50Hz Voltage rating (AVR) V 230 Running amperes 0.21 0.18 A Power input 0.032 0.022 watt Power sound level (H/M/L) dB-A Ref.dia. Narrow/Wide Pipe 6.35 (1/4) / 12.7 (1/2) Weight 21+4,5 kg Indoor Unit H/W/D mm 265 x 840 x 840 Panel H/W/D mm 291 x 950 x 950 • Sirocco fans and heat exchanger fins with new shapes are adopted and the operating sound could be reduced by max 6 db (A)! • Wide reduction of the power consumption by adoption of newly developed DC fan motors with variable speed, new heat exchangers • Easy fine adjustment of the body suspension height • Discharge opening and flap with new shape • A drain height of approximately 85 cm from the ceiling surface Bedpfxed Tw T Nj Ammsdg • Easy servicing of the drain pan We have 6 pc on Stock!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,040 mm, turning diameter: 580 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,040 mm, TECHNICAL DETAILS Turning diameter: 580 mm Turning length: 1,040 mm Spindle speed: 3,500 rpm Travel range X-axis: 2,500 mm Travel range Z-axis: 1,040 mm Tailstock diameter: 85 mm MACHINE DETAILS CNC control: Fanuc 18T-C Dimensions & Weight Dimensions (L × W × H): 4,650 × 2,320 × 2,060 mm Machine weight approx.: 7,200 kg Bedjzu Rzropfx Ammodg EQUIPMENT VDI turret with 12 driven tool stations Chip conveyor Machine without tailstock Foot switch Chuck Turning chuck

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, The machine has been very well maintained, regularly cleaned, and serviced. It is in near-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Max. sheet thickness: 15 mm Max. steel sheet thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Bdjdpfx Aszt R R Rommjg Input voltage: 380 V Input current type: Three-phase Laser on-time: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation / manual Safety light curtain Shuttle table Extraction system

Condition: used, Year of construction: 2009, Daikin VRV 3 RXQ16P7W1BA Air conditioner There are 2 units available ! The price is per air conditioner! Bdjdjtzxquopfx Ammog Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,488 h, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, The table and the dust extraction system are included in the price! TECHNICAL DETAILS Travel range X-axis: 3,500 mm Travel range Y-axis: 1,100 mm Travel range Z-axis: 1,500 mm Bdsdjzr H H Sopfx Ammog Table dimensions: 3,800 x 1,000 mm Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool positions: 40 Working feed rate: max. 15,000 mm/min Rapid traverse: 40,000 mm/min Maximum axis force (X, Y, Z): 1,500 N MACHINE DETAILS Control system: SELCA S 4045 PDH Operating hours according to image (as of: July 31, 2026) Total: approx. 29,147 h Partial: approx. 3,488 h A manufacturer's offer for dismantling and loading is available for €27,000.

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety Bdjdpfozx E N Sex Ammog

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 Bodpfxjwuckus Ammedg

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Bedpfx Amozx E Axjmodg Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Bsdpezw Ak Rofx Ammjdg Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: excellent (used), Urschel RA-D Dicer/Cutter/Slicer Height: 2000 mm Width: 1150 mm Length: 1000 mm Power supply: 400V 50Hz 3N Total power: 3.7 kW Bdjdpfxoy Akq So Ammjg Stainless steel Included cutting blade sets: 4 / 8 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Bdjdpfx Amozvb I Eemsg Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Turning diameter: 1,800 mm Turning length: 600 mm Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm Bedpfx Amjzv Rlgjmodg MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Machine weight: approx. 25 t Transport width: 3,700 mm EQUIPMENT 6-jaw chuck

Condition: good (used), Code: 0231 Brand: BIESSE Model: SKIPPER 100 - CE Standard CNC working center for furniture, kitchens, custom furniture, panels and various - CE Standard - Year 2006 Technical data: 3-axis (x-y-z) CNC working center - swan neck machine Movable panel, fixed working head - panel horizontally Integral protection of the working head and with emergency front carpets Numerical control with biesseworks software Infeed table (with motorized belts) left N. 2 panel fixing clamps (for their introduction into the working area) Outfeed table (with motorized belts) right Useful (maximum) working area (x - y - z) mm 3000 x 1000 x 60 Dimensions (minimum) workpieces that can be machined (x - y - z) mm 90 x 70 x 8 Dimensions (maximum) workpieces that can be machined (x - y - z) mm 3000 x 1000 x 60 (for panels longer than mm 2000, the minimum thickness becomes mm 13) Total installed power (kw) 20 (approx.) Lower working units: N. 1 vertical electro spindle hsk d-50 (power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Bjdpsxqntdjfx Ammedg Upper working units: N. 1 vertical electro spindle hsk d-50(power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Transfer for panel loading and unloading: structure made of aluminum profiles, belt-driven table for panel translation/lifting bar BiesseWorks machining programming system Compressed air 7/8 bar Total power Kw 20 Overall dimensions - (see attachment) Machine weight kg 2700

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Bdodpfx Aszv N Hpsmmeg Dust extraction system: Donaldson Torit DCE