Swing vibrating sieve 1200mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Hedpfx Aszu N Abekuet Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Automatic wire threading

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Hedpfxeyi Ex Ns Akust

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Hsdpfx Akezu Nyajust Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Hjdpfx Akjzu Avzsujt Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, WAM FLO dust collector, extraction filter unit, filter, extraction system New Fan motor power: 3 kW, 3000 rpm Filter area: 22 m2 Equipped with electro-pneumatically cleaned filter cartridges Stainless steel 304 Zero dust emission 5 units in stock See our other listings VMA Wekerom Hjdpfowyf Aqsx Akuet

Condition: not inspected (used), machine/vehicle number: AAC3021001514, No minimum price – guaranteed sale to the highest bidder! For sale is a digital color laser printing machine from Konica Minolta, model AccurioPress C3070. TECHNICAL DETAILS Manufacturer/Model: Konica Minolta AccurioPress C3070 Equipment Class: Digital Color Printing System / Production Printing System Serial Number: AAC3021001514 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 1,184,396 pages Network: Yes WLAN: Yes Duplex Printing: No MACHINE DETAILS The machine is offered expressly in an untested condition. A function test is not currently possible due to the missing hard drives or SSDs. This also applies to the printer controller. Therefore, the technical functionality of the main unit and the accessory components could not be confirmed. Hard Drives / SSDs: Missing Function Test: Not possible Technical Condition of Main Unit: Untested Technical Condition of Accessories: Untested Cosmetic Condition of Main Unit: Moderate signs of wear in the upper and front area Paper tray drawer: Opening or handle torn off Cosmetic Condition of PF-602: Moderate signs of wear in the upper and front area EQUIPMENT Konica Minolta AccurioPress C3070 Printer Controller Serial Number: A00043842 Finisher FS-532 Serial Number: 75710 Paper Feeder PF-602 Serial Number: 75711 Booklet/Finishing Unit SD-506 Serial Number: 75712 RU-518 Serial Number: 75713 Hodpfezu Ariox Akust Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: not inspected (used), machine/vehicle number: 698501644, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon varioPrint 115 printing system with extensive accessories. The system uses monochrome laser printing technology and supports the DIN A3 format. TECHNICAL DETAILS Manufacturer/Model: Canon varioPrint 115 Equipment Class: Production printing system / printing line Serial Number: 698501644 Printing Technology: Monochrome laser printing Maximum Format: DIN A3 Page Counter: 3,889,839 pages Network: Yes WLAN: Yes Duplex Function: No MACHINE DETAILS The main unit is offered without a hard drive or SSD. The existing data storage medium has been destroyed and recycled. According to the technical report, the printer cartridge is almost empty. The technical condition of the main unit should be checked before commissioning. Hard Drive / SSD: Not available Existing Storage Medium: Destroyed and recycled Printer Cartridge: Almost empty Technical Condition of Main Unit: To be checked before commissioning Accessory Components: Not technically tested / untested EQUIPMENT Canon Paper Folding Unit-J1 (F281270) Hsdpfx Akozu Alisuot Serial Number: 75718 Oce 01051 Serial Number: 75721 Canon Staple Finisher-W1 (F710700) Serial Number: 75722 Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any warranty or guarantee. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, There are 14 pieces of steep conveyor belts with corrugated edge for sale, the price is per piece; A few data about the conveyor belt ; Hsdpfx Asu Smliekujt L: 2000mm NB: 270mm GB: 470mm Belt speed constant : 4m/min Cleat height : 30mm Corrugated edge : 30mm high Hopper in the lower area Heat resistant belt

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Hedszu Akrepfx Akuet Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: not inspected (used), machine/vehicle number: XMS00835, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon imagePRESS C850 with extensive accessories and a controller system. This machine is suitable for professional production and color printing in formats up to DIN A3. TECHNICAL DETAILS Manufacturer/Model: Canon imagePRESS C850 Device Class: Copier / Production Printing System Serial Number: XMS00835 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 5,283,148 pages Network: Yes WLAN: Yes Duplex Printing: No Condition: Used Controller System Model: CONTROLLER_T42 Serial Number: 1711072031 Housing: Tower Housing Hjdpszu Adfsfx Akuet Hard Drive: 500 GB Operating System: Not installed EQUIPMENT Canon imagePRESS C850 Controller System CONTROLLER_T42 Tower Housing 500 GB Hard Drive Booklet Trimmer-F1, Item Number F713900 Document Insertion Unit N1, Item Number F281260 SSD Bridge, Serial Number 75724 SSD Square Fold Module SFM 7714, Serial Number 75723 Paper Deck-C1, Item Number F281030 Booklet Finisher-W1 PRO, Item Number F710700 The printing machine and accessories are offered without technical inspection. A functional test of the individual components could not be carried out. The data storage device of the printing machine has been destroyed and recycled. HDD/SSD of the printing machine is missing. The toner or printer cartridge is almost empty. The controller system does not have an installed operating system. The accessory components are explicitly sold as untested. Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty and guarantee. The information on the technical data comes from the original offer. No guarantee is given for typing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Klinkenberg bag compactor / sack densifier Empty bags are reduced by up to 10 times Motor power: 4kW Fully refurbished and coated See our other listings Hsdsyf A Exjpfx Akuot VMA Wekerom

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Hjdpfxszuzpaj Akujt Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 12,300 kg, maximum load weight: 2,007 kg, DGUV certified until: 04/2027, Year of construction: 1980, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Valid safety inspection certificate until 04/27! TECHNICAL DETAILS Boom: 30 m Hook height: 34.2 m Load capacity at 15 m reach: 2,007 kg Load capacity at 18 m reach: 1,588 kg Load capacity at 21 m reach: 1,300 kg Load capacity at 25 m reach: 1,030 kg Load capacity at 28 m reach: 881 kg Load capacity at 30 m reach: 860 kg Hoisting rope diameter: 9.07 mm Trolley rope diameter: 6.8 mm Telescoping rope diameter: 12.6 mm MACHINE DETAILS Empty weight: 12,300 kg EQUIPMENT Remote control Safety inspection certificate Hsdpfxozuzmxe Akujt External reference: 633 The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ram holder: hydraulic Hsdpfx Aozuw Ewskuet Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools