Screw compressor

Kaeser SK21

Condition: excellent (used), Year of construction: 2005, S017013 PROD. KAESER TYPE SK21T S/N 1145 YEAR 2005 POWER (kW) 11 CAPACITY (m3/min) 1.5 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 772025 FREQUENCY CONVERTER no BUILT-IN DRYER yes, R134a 0.65 kg HEAT EXCHANGER no Nodpfx Apez Dgp Ujhjlg COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Nsdpfx Asudi Unsphelg Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Nlsdoinur Ajpfx Aphog Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Nedjwwvwyopfx Aphelg

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Nljdpst A Uyuefx Aphjg Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: excellent (used), - 30kW engine - built-in dryer - Max. working pressure 7.5 bar Nedpfswlcq Nox Apholg

Condition: like new (used), Year of construction: 2026, power: 286 kW (388.85 HP), fuel type: diesel, rotational speed (min.): 1,900 rpm, Technical Data for Deutz Engine Type BF6M1015C General Specifications Number of Cylinders: 6 Bore/Stroke: 132 mm / 145 mm Displacement: 11.91 liters Compression Ratio: 16.5 Max. Rated Speed: 2100 rpm Nljdpfx Aeyzaayepheg Mean Piston Speed: 10.15 m/s Power Ratings for Construction Equipment Engines Group I: Power: 300 kW Speed: 1900 rpm Mean Effective Pressure: 14.4 bar Group III: Power: 273 kW Speed: 1900 rpm Mean Effective Pressure: 13.1 bar Additional Parameters Max. Torque: 1980 Nm At Speed: 1200 rpm Minimum Idle Speed: 550 rpm Weight (to DIN 70020, Part 7A): 850 kg This summarized technical data provides a comprehensive overview of the BF6M1015C engine’s specifications and performance ratings.

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Nlodpfx Apew D Uqfjhjg Drill capacity 8mm-40mm.

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Njdpfx Ajwfg Hhopholg

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF Nljdpsy Iplfjfx Aphjg 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility