Slitter-rewinder

Goebel

Condition: used, Year of construction: 1995, Format: 520 mm Equipment: Exchangeable casettes format change system Web offset cassette: 2 x 24 Zoll, 2 x 17 Zoll Dwjdpfxszywctj Abaob Fountain water system Technotrans 4 Offset units Roll to Roll

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: Dwedpfoyx Uy Ajx Abaeb • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Year of construction: 1989, Format: 520 mm Equipment: Exchangeable casettes format change system Perforation unit for Business forms Remaliner 3 finishing options: Folded, Sheet and Reel 6 Offset units Dsdpfx Ajzywcmjbajwb 6 x 24 Zoll printing unit inserts 2x UV R/V dryer

Condition: used, Year of construction: 1986, Format: 520 mm Equipment: Exchangeable casettes format change system Dwjdpfxozywcge Abasb Perforation unit for Business forms Remaliner finishing options: Roll to Fold, Roll 3 Offset units 3 x 22 Zoll printing unit inserts

Condition: excellent (used), Year of construction: 2011, The electricity and gas operated system enables surface treatment of plastic films by flame treatment. Field of application: e.g. Reverse foils in the solar industry MAIN COMPONENTS • PSA turning roll and turret winder 2200/12 PSA W / ARW 2200/12 - Fyling Splice • Hill/Jungwirth burner unit for gas/air mixture • Suction • Erhardt + Leimer web edge control Dwedpfx Asvydy Njbasb • Detect the OCS camera system for the error • Semket labeling system to identify the errors • GWK temperature control units for roller cooling SKL SP HC300 330KW

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Dodpfx Aezycrasbaewb

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Dodpfozxfbnox Abaswb Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Year of construction: 2019, condition: ready for operation (used), An Inova saw for cutting paper cores is available. Paper core length range: 50mm-2000mm, paper core inner diameter: 400mm-500mm, wall thickness range: 15mm-30mm, max. payload: 30kg. Machine dimensions X/Y/Z: approx. 3500mm/1000mm/1850mm, weight: approx. 1600kg, control: Siemens HMI. Dokumentation vorhanden. An on-site inspection is possible. Dedoxx Udxspfx Abajwb

Condition: excellent (used), Year of construction: 2003, operating hours: 2,100 h, functionality: fully functional, machine/vehicle number: 16/20, Siemens 840 D Powerline Spindle speed: 50 rpm/6000 rpm Tool holder: SK 40 X-axis: 1300mm Y-axis: 150mm Z-axis: 150mm Clamping hydraulics Pendulum operation possible 8-fold tool changer Weight: approx. 2500 kg Dedpfsuc T Rdjx Abaowb Partially overhauled, Commissioning within a radius of 200 km included in the price.

Condition: used, Year of construction: 2005, Line Configuration 1. Unwinding Unit - Serame web unwinder 2. Corona Treatment System - Ferrarini & Benelli corona treatment unit; designed for double-sided treatment, currently only the top side is active 3. Web Suction System - Kelva web suction unit 4. Web Register Infeed Printing Units (Offset) 5. Printing Unit DW 1 – Offset 6. Printing Unit DW 2 – Offset - IST UV dryer 7. Web Turn Device - Web turner Possible Printing Configurations: 2 / 6-color printing Up to 8-color printing possible 8. Printing Unit DW 3 – Offset Dedpoyhayrsfx Abajwb 9. Printing Unit DW 4 – Offset 10. Printing Unit DW 5 – Offset 11. Printing Unit DW 6 – Offset IST UV dryer 12. Printing Unit DW 7 – Offset 13. Printing Unit DW 8 – Offset UV drying Coating and Drying 14. Flexo Coating Unit IST UV and water-based coating 15. Drying Systems Adnos hot air dryer UV dryer available Inspection and Quality Control 16. BST Web Video Inspection System 17. BST 100% Inspection System – IPQ Check Rewinding 18. Rewinding Unit Serame web rewinder Additional Equipment: - Technotrans temperature control system - Web break sensors - Anti-static system - Central control console with: - Eltromat register control system - Operator monitors for machine control and visualization

Condition: used, empty load weight: 1,860 kg, maximum load weight: 6,140 kg, overall weight: 8,000 kg, axle configuration: 2 axles, first registration: 09/1985, loading space length: 4,500 mm, loading space width: 2,440 mm, loading space height: 500 mm, total length: 6,350 mm, total width: 2,500 mm, total height: 1,800 mm, suspension: steel, tire size: 10R17.5, color: blue, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2 axles, BPW axles, tandem axle, leaf spring suspension. Dwjdpfx Aei Rm Uysbajb ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: ready for operation (used), HAGEN & GOEBEL / Internal thread cutting machine -Type HG 22 EB -Speed range 180 - 1120 rpm -Thread size up to max. M22 / steel -Thread size / cast iron up to max. M 27 -Thread size aluminum / brass max. M 33 -Smallest thread size M6 -Single stroke / continuous stroke -Table dimensions 600x500mm Dsdpfx Abezu Nzwjaewb Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1000 kg Errors and omissions excepted.

Year of construction: 2016, condition: ready for operation (used), Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm. Dsdpfx Abjv T Aqgeajwb