MultiFormer 600 for burgers and nuggets

GEA MultiFormer MLF600

Condition: good (used), functionality: fully functional, Frigoscandia FloFreeze MX62 IQF tunnel freezer in good condition, operating on NH3 (ammonia). Suitable for rapid, individual quick freezing of products such as vegetables, berries, shrimp, and pasta. Supplied complete with infeed/outfeed systems, shaker, optional glazing conveyor, evaporators, control cabinets, Danfoss frequency converters, and Siemens TP1200 Comfort HMI (upgraded in 2020). Products are placed on the infeed shaker (approx. 1200 mm high), where they are separated and desticked. They are then transported into the freezer via a blue plastic conveyor belt. The belt is approximately 7400 mm long and 1190 mm wide, featuring a lowering mechanism that redistributes products and removes ice. The discharge height is 912 mm. The optional Innotec Systems glazing belt can apply a protective ice coating. The MX62 is equipped with two NH3 evaporators and six centrifugal fans, each driven by an ABB M2AA160MA-2 motor (50 Hz, 13.2 kW, 2897 rpm). Cold air is blown up through the conveyor to prevent product sticking. The evaporators can be defrosted with hot air via spray nozzles. The freezer is fitted with three inspection hatches. Includes the original control cabinets with frequency converters and Siemens control system. The FloFreeze MX62 specifications: - Dimensions: 7400 x 4700 x 3000 mm (L x W x H) - Effective belt length: 7400 mm - Effective belt width: 1190 mm - Infeed height: 1200 mm - Discharge height: 912 mm Tunnel freezer capacity (examples): Product: Green peas - Capacity: 3,600 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C Product: Cauliflower - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 40 mm Product: Tomatoes - Capacity: 1,440 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 30 mm Product: Strawberries - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 35 mm Gjdpfx Asxz Eacefaotu Product: Potatoes - Capacity: 1,800 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 25 mm Product: Meat - Capacity: 2,340 kg/h - Infeed temperature: -3°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: cubes of 20 mm

Condition: used, functionality: fully functional, The FRIGOSCANDIA FF-2-RMA IQF (Individual Quick Freezing) tunnel freezer is a continuous freezing system designed for food products that require individualized quick freezing, such as seafood, fruit, vegetables, sliced meats or pre-cooked Godpfx Ajwn Hd Sofaotu products. Its linear design with forced air flow guarantees homogeneous cooling, avoiding block formation and preserving product quality. Applications: Fishing industry: Shrimps, prawns, fish fillets, mollusks. Fruit and vegetable industry: Whole or chopped fruit, vegetables, pulses. Meat and meat preparations: Meatballs, chicken strips, vegetable burgers. Precooked products: Pasta, rice, ready-to-cook mixes. Production depends on the product, in peas for example it would give: 850 kg/h. Inlet temperature: +15ºC Outlet temperature: -18ºC Production may vary depending on the product.

Condition: used, Cutter Manufacturer: Seydelmann Model: K 204 Ultra Made of stainless steel Volume: 200 liters 2 knife speeds 2 bowl speeds 2 mixing speeds Godpfx Afjtu I T Esastu Dimensions: 280x205x255cm Electric power: 78kW Voltage: 400V, 3 phases, 50 Hz

Condition: good (used), Trolleys, transport trolleys, wheelchairs, transport dog Gedpfx Afsb A Htijajtu -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4" inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8" inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2" inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth sockets M8,M10,M12 Five Star Nuts TS10,TS15,TS20,TS25,TS27,TS30,TS40,TS45,TS50 - Accessory 3/8" inch ratchet: Attachment for bits Torx nuts without bore T40,T45,T50,T55,T60,T70 Torx nuts with bore TT40, TT45, TT50, TT55, TT60, TT70 Imbus Nuts – H7,H8,H10,H12,H14 Slotted nuts SL8,SL10,SL12 Cross nuts PZ3,PZ4, PH4,PH8 - Accessory 1/2" inch ratchet: Snack H14,H17,H19,H22,H24 Snack H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 short essay, long essay, medium essay, Torx T30,T45,T50, allen key H7 + Drawer 3: - open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring wrench set 8 pieces 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision engineering screwdriver Slot: SL3.0 x 100mm, Cross : PH0 x 100mm - Screwdriver with soft grip and external hexagon: Slot: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8x150mm Cross : PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7x80 ; T8x80 ; T9 x 80 ; T10x80 ; T15x100 ; T20x100 ; T25x100; T27x100 T30x100 ; T40x150. Godpju Img Sofx Afaetu + Drawer 5: - T-handle imbus / hexagon set with ball head: 3 x 115mm; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + drawer 6 - Circlip pliers set inside/outside 4 pieces, 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle nose pliers, curved needle nose pliers, pipe wrench. - Claw hammer, grain 3mm,4mm,5mm,6mm,7mm,8mm.

Condition: excellent (used), Frigo GYRoCOMPACT 600 Classic spiral freezer, 34 tiers. Had only run for 14,000 hours when the factory closed. Beautiful condition. North South configuration. 34 tiers, 80mm tier height so perfect for burgers, sausages, chicken nuggets, fish fingers, spring rolls, hash browns etc. Gedewztmaspfx Afaetu

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Gtjdpfju Rc R Ssx Afaou

Condition: good (used), 400mm multiformer in lovely condition. Godpfx Afsv D Hfpoajtu

Condition: reconditioned (used), The Risco RS4001 Vacuum Filler is a highly efficient and versatile machine designed for use in the food processing industry, particularly for filling and portioning sausages, hamburgers, meatballs, pâtés, and other similar products. Gsdpfx Afeubvkweajtu The RS4001 features a powerful vacuum system that ensures consistent product filling with minimal air inclusion, which is essential for maintaining product quality, especially in sausages and similar products, it is also equipped with advanced portioning technology that allows for precise control over portion sizes. Technical informations: Hopper capacity: 260l Power: 6.3kW Portioning range: 5-10.000 grams Efficiency: up to 380 portions/min / 6.500 kg/h Dimensions: L: 1950 x W: 1200 x H: 1950mm Weight: 900kg Machine after complete renovation

Condition: good (used), Oil storage tank with level gauge and ancillaries. 3500 litres. Has been used with a continuous fryer to store the oil when it is emptied. Model VTC3500 is the same as OLT3500. Gtjdpfon Upivsx Afaju