Hot-Chamber Diecasting Machine - Vertic.

FRECH DAW 50

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. Gsdpfx Ajtuxmyed Ajkf It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit Gsdpfx Adjiu Smbe Aokf 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: good (used), functionality: fully functional, FRECH DAK 580-62 DRC Die-Casting Machine, used Machine number 430302, pressing force 5800 kN, opening force 155 kN, Godpowc Tn Tsfx Ad Ajkf maximum opening stroke 680 mm, double toggle lever (mould lock), pressure chamber design cold chamber, press-in force 589 kN, filling piston diameter 60 to 110 mm, filling volume of pressure chamber 1101 to 3700 cm³, specific pouring pressure 642 to 2155 bar, largest blast area approx. 274 to 920 cm³, clamping plates 1120 x 1120 mm, clear width between columns 700 x 700 mm, mould height max. 800 mm, min. 350 mm, mold area 446 x 446 mm, 4 columns, column cross-section 140 mm³, software version SBS 20.10 VISUALIS 17.10, including dosing furnace MELTEC AVDF 1200/5000, year 2016, Serial number 3376/16, handling robot ABB, spray head, temperature control unit REGLOPLAST 300DG/12/FM30/1K/RT45, serial number 371412, without year of manufacture. Technical attributes dimensions (l x w x h) approx. 8000x5500x3500mm weight approx. 36000kg year of construction 2000

Condition: good (used), Year of construction: 2001, functionality: fully functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1000 mm, clamping platens 1300 x 1300 mm, column distance 825 mm, column diameter 180 mm, casting force max. 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1539 to 4523 cm³, operating pressure 160 bar, drive motor 45 kW, with dosing furnace MELTEC AVDF 1200/5000, year 2017, serial number 3469/17, 30 kW, handling robot ABB, year 2007, with control Gksdpjwc Tdzefx Ad Ajf system, spray head, power supply unit in control cabinet missing, pump defective, as spare parts donor Technical attributes dimensions (l x w x h) approx. 8000x7500x3500mm weight approx. 36000kg year of construction 2001

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm Godpjvxlufefx Ad Askf capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.