Complete brewery

Diverse

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Bioreactor capacity 2 x: 240 m3 Ncedjvcql Ropfx Ah Ner Operation / Control: Siemens Simatic S7 Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Ncjdpfjw Hr Awex Ah Njr Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, functionality: fully functional, Various used conveyor belts in stock Belt widths: between 500 and 1,200 mm Ncedowm Nibepfx Ah Ner Axle lengths: from 2 to 40 m For all types of mineral bulk materials With and without supports, some with undercarriage

Condition: used, We currently have the following blowers in stock: KLIMA CELJE 104CVX560, electric drive 75 kW; RVM 02/71-80, n = 3,000 rpm, electric drive; 2 x SPELLNA VRU-35.1-200-33HO,6, n = 2,910 rpm, electric drive 7.5 kW; VENTA MHI 31.5-50, n = 2,910 rpm, Pm = 7.5 kW; MHI 71, n = 1,450 rpm, electric drive 11 kW; 2 x WOODS plug-in blowers, n = 1,480 rpm. Njdpfxjw I Ef He Ah Nocr

Condition: used, Container (stackable container) steel sheet Assortment of storage containers – Reservoir containers – metal storage bins – open front storage bins, used Schäfer bins. Ncedpfx Ajg U Am Teh Nsr Various versions (painted, galvanized, closed, perforated, with hand grip) and various sizes / stackable. Dimensions: 30 x 50 x 20 cm + 37 x 37 x 11 cm Total quantity – 56 pieces The stackable boxes are available for €180 net ex works plus packaging costs Ideal for transport and storage. All technical data subject to errors/typing mistakes. Sales exclusively to countries of the European Union.

Condition: used, Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks. Capacity: 202 m3/h Ncedpsyzhz Sefx Ah Njr Operating pressure: 10 bar Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Condition: used, Reusable glass bottle filling line for mineral water and soft drinks, consisting of the following components: - Depalletising with pallet feeding (Schaefer, approx. 1989) - Unpacker (KHS with conversion by Paxona) - Crate washer for crate spraying - Unscrewing machine (Adelski) - Bottle cleaning machine (Krones, 2001) Single-end machine - Empty bottle inspector (Krones) with ejection and glass shredder - Glass bottle short tube filler (Krones, 2002) with cappers for crown caps and screw caps + cap inspection - Labelling machine (Krones, 2009) for cold glue labelling of paper labels + label inspection - Packer (KHS with conversion by Paxona) - Depalletising (Schaefer, approx. 1989) - Free transport for bottles and crates - CIP system with 3 containers - Premix system Translated with (free version) Nsdpfx Aeyxnd Ieh Nocr Additional title: Reusable line; years of manufacture approx. 1989-2012 Capacity: 11800 bo/h referring to 1.0 l bottles Formats: 0.33 l; 0.5 l; 0.8 l; 1.0 l; - Screw caps and crown caps Operation / Control: Krones Features: pallet loading; depalletising; de-crater; crate washer; unscrewing machine; bottle cleaning machine; glass bottle filling and capping machine; cap inspection; labelling machine; label inspection; crater; palletising; free crate and bottle transport; CIP system; premix system

Condition: good (used), Screws, hexagon head screws, socket head cap screws, Allen head screws -Hex bolts: M20, DIN 931 -Weight: 514 kg -Sizes/Quantity: M20 x 45 to M20 x 100, see photo parts list -Grade: 8.8 black or galvanized Manufacturer: various Price: complete Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces each = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces each = 300 pieces Nsdeiqpyqjpfx Ah Necr M20 x 60 mm, galvanized, 20 packs of 25 pieces each = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces each = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces each = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces each = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces each = 125 pieces

Condition: used, CNC / Milling Clamping Devices – Comprehensive Lot approx. 150 kg Description For sale is a comprehensive package of clamping devices suitable for CNC milling machines as well as conventional machining. This package comes from our workshop inventory and includes a wide variety of clamping and fixturing components that can be used universally in manufacturing, tooling, or maintenance applications. Due to the quantity and diversity, the lot is ideal as a basic set or to supplement existing clamping equipment. — Ncjdpfeyx Hgusx Ah Njr Scope of Delivery (mixed package) • Clamping claws in various sizes • Fixture blocks and clamping pieces • Round holders / clamping plates • T-slot nuts and fastening elements • Screws and accessories • Various fixtures and single components Total weight: approx. 150 kg Sale is preferably as a complete package. — Condition • Used • Fully functional • Mixed assortment • Partially with signs of use — Commercial Notice The total value of comparable individual components is significantly higher than the asking price. This package offers a cost-effective opportunity to acquire a comprehensive set of clamping equipment. — Location & Collection Location: Eisenach Collection preferred (due to weight), but shipping by freight forwarder is possible upon request: €90 Loading by arrangement possible The sale is made with the exclusion of any warranty and liability for material defects. The clamping devices are purchased as seen.

Condition: ready for operation (used), Collection of various milling heads and tools Njdpfeyxhy Njx Ah Njcr

Condition: new, grinding wheel diameter: 300 mm, Warehouse clearance - - Grinding wheels - New - unused - see pictures and lists Nedpfx Ajygw Nueh Nscr 300 x 12/16/18 mm (in wooden crate) to GIVE AWAY!!!