Creep speed Unit FG20 13/6P4

Demag

Condition: excellent (used), Year of construction: 2006, overall weight: 2,956 kg, total height: 650 mm, total length: 10,500 mm, total width: 2,494 mm, load capacity: 10,000 kg, Span: 9330mm Lift height: 1000mm Capacity Kg: 10000 Lifting speed: 0,7 - 4 M/Min Hoist trolley: 5 - 20 M/Min Crane driving: 10 - 40 M/Min Hight under roof:690mm Remote control: Yes Length: 10500mm Width: 2494mm Gkedpfs Akbudox Agljd Height: 650mm Weight: 2956kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring for conical brake disc, unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 37 mm -Weight: 1.0 kg Gksdpfx Aszixx Uoglsd

Condition: used, Electric chain hoist, electric lifting unit, crane DEMAG type DKUN 2-160 K V3 F6 Manufacturer's serial number: 61620975 Year of manufacture: 1995 Load capacity: 310 kg Hook travel: 1.45 meters Distance from suspension point to load hook: 450 mm Lifting speed: 12.5 m/min (2-strand) Gkjdpfx Agj Aipkcsljd Control pendant cable length: approx. 1.9 meters Power supply: 400 volts, 50 Hz - 2 load strands = 300 kg - only one lifting speed Weight: 33.5 kg

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine Gksdpfxorr Ehme Aglod - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 Gsdpfsh Nv Itox Aglokd - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Condition: used, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Girder (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist and guide the load. Application High-quality and sensitive parts can be lifted, lowered and positioned more gently and safely. Installation processes and assembly operations can be controlled more precisely. Lifting movements can be carried out much faster thanks to the almost twice as high nominal speed per lift in the partial load range. Design - plug and lift - all electrical connections of the chain hoist are pluggable - with a foldable, universal suspension bracket, the hoist can be easily attached to the frame - fatigue-free operation thanks to the ergonomically optimized and robust DSC control switch - quick change of the entire chain drive without disassembly of motor or gearbox parts - contactor control 24 V, protection class IP55 - operating hour counter - limit switch for upper/lower hook position - high safety and long service life thanks to the speed-monitored brake/slip clutch principle Advantage - One-hand operation, i.e. the control unit is located above the part to be handled (left- and right-hand operation via rocker switch) - Quick-change coupling enables universal use through easy exchange of the various load handling devices Gkedpfjhwd E Nex Agled Technical data Brand DEMAG EAN 4039247450527 Manufacturer Article Number 93200146 Load capacity 80 kg Lifting height 2.8 m Lifting speed control In 2 stages Lifting speed fine lift 4 m/min Lifting speed main lift 16 m/min Number of load strands 1 piece Overall height (H) 694 mm Length 422 mm Depth 268 mm Model DCM-Pro 2-80 V16/4 Control unit GSA Type 4 Color Azure blue RAL 5009 Mandatory testing according to DGUV (UVV) Yes Delivery unit 1 Gross weight 25.000 kg Range of movement: 3 meters to the side and 2 meters forward/backward Condition: used You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Gjdoz Ipkcopfx Aglskd Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Godsz Iqlbjpfx Aglokd Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Gkedpfxsz Iql Ie Aglsd Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Gsdez Ipi Sepfx Aglskd Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request