Stamping and forming machine

BIHLER GRM 100

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: D06E/8463, Offer Number: D06E/8463 Machinetype: wire and strip bending machine Make: BIHLER Type: GRM100 Constr. year: 1993 Dcedpfxoyya Nxj Abbjg wire diameter range: 10 mm width of band: 100 mm feeding length: 250 mm Location: Europe

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm Dcsdpfx Ajtzlzaobbjg outout: up to 135/min

Condition: good (used), BIHLER GRM100 multislide punching and forming machine, Dcsdspm H Haopfx Abbeg Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Dsdpetvar Iofx Abbscg

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dcodpfx Abow H Au Robeg

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Dcsdpfsxg Rhvox Abbjg

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min. Dcsdpfjrpk Axox Abbog

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Djdpfsw H Auqox Abbscg

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. Dsdpfx Ajyhmg Sobbecg With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head interface: PH10MQ Probe head: Renishaw TP2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to offer you personalized advice to find the right machine for your measurement requirements. Worldwide delivery available on request!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, For sale: Used Wenzel WP-KL coordinate measuring machine, year of manufacture 2007, in excellent condition and immediately ready for operation. This machine is ideally suited for quality assurance, toolmaking, and precision metrology applications. General Condition The machine is in very good technical and optical condition, professionally overhauled and modernized in 2022. On-site inspection is possible by appointment. Technical Data - Model: Wenzel WP-KL - Year of manufacture: 2007 - Serial number: LH075440 - Machine height incl. extended damper: 3,485 mm (retracted: 3,470 mm) Measuring Range & Accuracy - Measuring range (X/Y/Z): 1200 × 2500 × 1000 mm - Accuracy (MPE E): 2.6 + (L/300) Equipment Dcjdpfxox H Tqie Abbjg - CNC control: WPC, 3-axis - Probe system: Renishaw PH10M - Scanning probe: Renishaw SP25 with scanning kit 2 (probe stylus lengths 50–100 mm) - Probe changer rack: Renishaw FCR25 with 3 ports, empty PC System & Software - PC system with Windows 10 Professional - 2 × 24" TFT monitors - WM QUARTIS CNC geometry software – Version 2025 - WM QUARTIS CNC freeform surface applications – Version 2025 - WM QUARTIS CNC CAD import interface (STEP) – Version 2025 - USB user dongle with software license Accessories (included) - Small M3 stylus kit - Reference sphere - PC and controller trolley with integrated desk - Ergonomic hand control panel HT400 If interested or if you have any questions, feel free to contact us! Price: €85,000 net, negotiable for quick completion. All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.