Second-hand machinery for sale (2,514)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394V02886, Year of construction: 2019, operating hours: 15,499 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, Service + UVV 02/2027 5,000 kg 3rd & 4th Valve Fork Positioner Forklift LPG Forklift No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,870 mm Fork length: 2,400 mm Free lift: 150 mm MACHINE DETAILS Mast type: Freisicht (Clear View) Drive type: LPG (liquefied petroleum gas) Dimensions & Weight Dimensions (L x W): 5,500 x 1,450 mm Weight: 7,500 kg Itsdsyuumgopfx Abned Operating hours: 15,499 h EQUIPMENT • Ex-Linde full-service machine • Next service due in 858 operating hours • Safety inspection (UVV) valid until 02/2027 • Facelift model with tilt angle display (practical for sensitive goods) • 3rd & 4th hydraulic valve • Fork positioner with sideshift • Full cabin with heater and windscreen wiper • Comfort seat with lumbar support and seat heating • LED work lights front and rear • Blue safety light at rear Note: Dismantling of the mast can be optionally offered by the seller for €950 net. All dimensions are approximate. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 tons is possible with a large forklift on site at your own risk. Collection ONLY with an email confirming payment receipt! Collection WITHOUT prior appointment possible Monday to Friday, 7:00 am – 4:30 pm. A mast that is too high for transport can be dismantled on request. In the event of delayed collection, a storage fee of €20 per machine per day will be charged (payment required before collection).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V00612, Year of construction: 2019, operating hours: 13,018 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, DGUV certified until: 02/2027, fork length: 1,200 mm, Equipment: UVV, Service + UVV until 02/2027 LI-ION Lithium 1,400kg Duplex Free lift Electric Forklift Truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 3,145 mm Overall height: 2,150 mm Fork length: 1,200 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions (L x W): 3,000 x 1,100 mm Weight: 3,200 kg Battery: 10/01/2019 48V 268Ah, very good performance – measured at 52.3V Operating hours: 13,018 h EQUIPMENT • Former Linde full-service unit • Service valid until 02/2027 • UVV valid until 02/2027 • Facelift model with tilt angle display (very useful when handling sensitive goods) • Duplex mast with full free lift • 3rd hydraulic valve • Side shifter • Load backrest (can be easily removed) • Lateral fall protection (can be easily removed) • LED work light front • LED work light rear • Safety light rear • Comfort seat Itedpfeyuuh Rsx Abned All dimensions are approximate. Errors in specifications and measurements are excepted. COLLECTION CONDITIONS Side loading up to 5 tons possible on-site with a large forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be dismantled on request. In case of non-collection within the specified period, a storage fee of €20 per machine per day will be charged (payment must be made prior to collection).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386J12353, Year of construction: 2018, operating hours: 9,811 h, load capacity: 1,600 kg, lifting height: 6,625 mm, free lift: 1,800 mm, mast type: triplex, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027 LI-ION Lithium 1,600kg Triplex 662cm Electric Forklift Truck Iedpfxsyuuhwo Abnotd No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated capacity: 1,600 kg Lift height: 6,625 mm Free lift: 1,800 mm Overall height: 2,871 mm MACHINE DETAILS Mast type: Triplex Drive: Electric Battery: 30/11/2018 Li-Ion 48 V / 335 Ah, 16.3 kWh Dimensions & Weight Dimensions (L x W): 3,200 x 1,100 mm Weight: 3,500 kg Operating hours: 9,811 h EQUIPMENT Former Linde full-service machine Service valid until 03/2027 UVV inspection valid until 03/2027 Facelift model with tilt angle indicator (especially useful for delicate goods) Triplex mast with full free lift 3rd valve Side shifter Rear safety light Front safety light Comfort seat Integrated scale Note: The mast can optionally be dismantled for an additional charge of €950 net. All dimensions are approximate. No liability is accepted for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with a large forklift at your own risk. Collection ONLY with email confirming payment! Collection WITHOUT appointment: Monday to Friday, 7:00 am – 4:30 pm. If the mast is too high for transport, it can be dismantled upon request. In case of late collection, storage fees of €20 per machine per day will be charged (must be paid prior to collection).

Condition: ready for operation (used), Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 Itodpfxoytcd Rs Abned EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: repair required (used), Year of construction: 2007, functionality: limited functionality, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, The machine is currently not operational. There are defects in the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Measuring plate: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Control system: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Iodpfxjytc Dqo Abnetd Calibration sphere: #134983 Note: The HP Z420 measuring PC with Windows 7 can be provided if required. Please note that this PC was infected with a virus as a result of a hacking attack.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, working width: 2,000 mm, total length: 6,000 mm, overall weight: 3,000 kg, cutting height (max.): 35 mm, TECHNICAL DETAILS Itedpfx Asyttdhobnsd Working width min.: 520 mm Working width max.: 2,200 mm Cutting height (max.): 35 mm Maximum passage height at existing milling cutters: 35 mm Feed speed: not adjustable (fixed setting, value not specified; estimated at approx. 8–10 m/min) MACHINE DETAILS Type of input power: Alternating current (AC) Dimensions & Weight Dimensions (L x W x H): 6,000 x 4,000 x 3,000 mm Weight: 3,000 kg EQUIPMENT Soundproof cabin Five processing axes per side, mechanically adjustable

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,265 h, load capacity: 1,600 kg, lifting height: 4,100 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,100 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,600 kg Triplex 410 cm 3rd + 4th Valve Electric Forklift 3,265 Operating Hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Free lift: 1,500 mm Lift height: 4,100 mm Mast type: Triplex Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,265 h Mast type: Triplex Drive type: Electric Battery: 48 V, 625 Ah Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,100 mm Weight: 3,400 kg FEATURES Former Linde full-service machine Facelift model with tilt angle display Triplex mast with full free lift 3rd valve for side shifter 4th auxiliary valve open for fork positioner White non-marking tires Front LED work lights Rear safety light Comfort seat All dimensions are rounded values. No liability accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Pickup ONLY with email confirmation of payment! Pickup WITHOUT prior notice: Monday to Friday 7:00 am – 4:30 pm. If the mast is too high, it can be disassembled for transport upon request. Itodpfxjyufrmo Abnsd If pickup is not made within the agreed timeframe, a storage fee of €20 per machine per day will be charged (the outstanding amount must be paid before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,213 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,400kg Duplex Free Lift Electric Forklift No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 3,145 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 13,213 h Mast type: Duplex Drive type: Electric Battery: 48 V 500 Ah, measured at 49.5V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,100 x 2,121 mm Weight: 3,100 kg EQUIPMENT Former Linde full-service unit Duplex mast with full free lift 3rd valve with sideshift Load guard (can be easily removed) All dimensions are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site, at buyer’s own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment Monday to Friday 7:00 am–4:30 pm. High masts can be dismantled for transport on request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day applies (payment due before collection). Isdpfxoyufbhe Abnjtd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,446 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027, Battery 19/2022 No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,140 mm Fork length: 1,800 mm Free lift: 1,519 mm Itedpeyud Sljfx Abned Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,446 h Drive type: Electric Battery: 19/2022 48V 750A, 49.6V (very good performance!) Mast type: Duplex Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,121 mm Weight: 3,500 kg EQUIPMENT Former Linde full-service unit Valve side shifter Duplex mast with full free lift All measurements are approximate. No liability for typing or measurement errors. COLLECTION TERMS Side loading up to 5 t possible onsite with a large forklift at buyer's own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment, Monday to Friday 7:00–16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (outstanding payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,732 h, load capacity: 4,000 kg, lifting height: 5,400 mm, free lift: 150 mm, construction height: 3,570 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV until 02/2027, 4,000 kg, 3rd + 4th valve, fork positioner, diesel forklift truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 5,400 mm Fork length: 1,200 mm Free lift: 150 mm Type: counterbalance forklift MACHINE DETAILS Operating hours: 10,732 h Drive type: diesel Mast type: full free-view Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,450 x 3,570 mm Weight: 6,400 kg FEATURES Former Linde full-service unit Next service due in 768 hours Free-view mast, no central hydraulic cylinder 3rd + 4th hydraulic valve; multiple fork positioner + side shifter (single fork positioner available on request) Full cab with heating and windshield wiper LED work light, front LED work light, rear Comfort seat with lumbar support and seat heating Note: Mast disassembly can optionally be offered by the seller for €950 net. Itodpfsyud Dusx Abnjd All measurements are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high for transport can be dismantled on request. If not collected within the agreed period, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 11,264 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 150 mm, construction height: 3,354 mm, DGUV certified until: 01/2027, Equipment: UVV, Service + UVV 01/2027 5,000kg EVO 3rd & 4th Valve Fork Positioner Electric Forklift No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,000 mm Fork length: 2,400 mm Free lift: 150 mm Type: Counterbalance forklift MACHINE DETAILS Operating hours: 11,264 h Itodpeyud A Rofx Abnjd Mast type: Clear view Drive type: Electric Battery: 17/09/2018, 80V 6PzS 930Ah, measured at 85.5V (very high performance!) Dimensions & Weight Dimensions (L x W x H): 5,400 x 1,400 x 3,354 mm Weight: 8,300 kg EQUIPMENT Former Linde Full-Service machine 3rd & 4th valve; fork positioner with sideshift Mast position memory installed Full cabin with heating Note: Mast disassembly can optionally be offered by the seller for €950 net. All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at buyer’s own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday, 7:00–16:30. Tall mast can be disassembled for transport on request. If collection is not made on time, a storage fee of €20 per machine per day applies (payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 16,254 h, load capacity: 5,000 kg, lifting height: 5,400 mm, free lift: 150 mm, construction height: 3,720 mm, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, 5,000 kg Service + Safety Inspection (UVV) 02/2027 3rd & 4th Valve Fork Positioner AC Air Conditioning Diesel Forklift Truck No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 5,400 mm Fork length: 2,400 mm Free lift: 150 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 16,245 h Mast type: Clear-view Drive type: Diesel Itsdpfx Absyudkbjned Dimensions & Weight Dimensions (L x W x H): 5,800 x 1,450 x 3,720 mm Weight: 7,700 kg FEATURES Ex-Linde service machine Current service performed, next due in 755 hours Full cab with air conditioning, heating, and windscreen wiper Clear-view mast without central hydraulic cylinder 3rd & 4th valve for fork positioner with sideshift Note: Dismantling of the mast can optionally be offered by the seller for €950 net. All measurements are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large onsite forklift at your own risk. Collection ONLY with emailed payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will apply (payment of arrears required before collection).

Condition: excellent (used), Year of construction: 2023, operating hours: 533 h, functionality: fully functional, machine/vehicle number: 20230605, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,060 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Spindle speed: 10,000 rpm MACHINE DETAILS Control: Heidenhain TNC 640 Coolant supply: 20 bar Rated power: 30 kVA Full load current: 52 A Max. current load: 250 A Short-circuit resistance: 25 kA Itodpfxeyma Ruo Abned Input voltage: 400 V Type of input current: Three-phase Total weight: 7,800 kg Operating hours Spindle hours: 533 h Machine on hours: 2,410 h Control on hours: 2,436 h EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, grinding length: 630 mm, grinding diameter: 320 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. grinding length: 630 mm Itsdpfsyvf S Nsx Abnod Max. grinding diameter: 320 mm MACHINE DETAILS Manufacturer: TOS HOSTIVAR Model: BHU 32 Year of manufacture: 1987

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 500 mm Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Spindle speed: 20 – 3,000 rpm Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Isdpoyuymfofx Abnotd Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: A.100765.01, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 6,000 rpm, The machine spindle was overhauled in 2015! TECHNICAL DETAILS Travel X-axis: 1200 mm Travel Y-axis: 1000 mm Travel Z-axis: 1200 mm Spindle speed: 25 - 6,000 rpm Max. torque: 900 / 1130 Nm Number of tables: 2 Maximum interference diameter: 1200 mm Table rotation speed: 15 rpm Table clamping torque: 10,000 Nm Tilting moment: 29,000 Nm Distance between spindle nose and table: 130 mm Pallet dimensions: 800 x 630 mm Pallet change time: 16 s Transport weight: 1,200 kg Number of tool stations: 250 Maximum tool diameter: 125 mm Diameter with adjacent stations free: 250 mm Maximum tool length: 650 mm Maximum tool weight: 40 kg Tool change time: 2.5 - 4.5 s Average chip-to-chip time: 7 - 9 s Tool holder: SK 50 DIN69871 Feed rate: 1 - 36,000 mm/min Rapid traverse: 36 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Ijdsytfmzspfx Abnjtd Dimensions & Weight Dimensions (L x W x H): 10,000 x 6,000 x 3,800 mm Machine weight: approx. 30,000 kg Operating hours: approx. 100,000 h (The machine was operated in 2-shift + ghost shift mode. The previous owner estimates approximately 100,000 hours over 20 years of operation.) EQUIPMENT Direct measurement via glass scales Coolant system 1,250 L High-pressure pump 11 bar (coolant) Through-spindle coolant 25/50 bar (TSC) Blow-out device for spindle taper Paper filter system Chip conveyor Pallet changer 2 pallets Set of tool holders Coolant/mist extraction Touch probe

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Itedjytr Ryopfx Abnsd Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Iedpoyttyvefx Abnstd Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Ijdsytr Hbepfx Abnotd Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm Itodpeyttrxefx Abnsd MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Itedpeyttqzjfx Abned Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Processing table Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: not inspected (used), functionality: unexamined, power: 55 kW (74.78 HP), Year of construction: 2010, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum working pressure: 8.5 bar Air dryer Model: ABT 102 compressed air dryer Ijdjyttk Iepfx Abnotd Max. working pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Operating voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes full responsibility for the installation, securing, and use of the machine at the destination. External reference: 7548

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Ijdpfx Aoyttf Ssbnotd Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Itedpfsyttcwex Abnjd Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Isdpfx Abjytr Rgenetd External reference: 6216