Second-hand machinery for sale (2,034)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Nlodpfx Aezd A Rdsmuoc Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91045841, Year of construction: 2007, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, battery voltage: 48 V, TECHNICAL DETAILS Load capacity: 2,000 kg Load center: 600 mm MACHINE DETAILS Mast model: ZG 560DZ Drive type: Electric drive Battery voltage: 48 V Nedpfxszd Ruko Amuslc Drive power: 6.0 kW Unladen weight without battery: 3,392 kg Battery weight: 890–984 kg EQUIPMENT Driver's seat Sensitive hydraulics Very maneuverable Ideal for high-bay warehouses Robust Jungheinrich technology Precise control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,976 h, load capacity: 2,700 kg, lifting height: 8,000 mm, mast type: triplex, TECHNICAL DETAILS Lifting height: 8,000 mm Load capacity: 2,700 kg Load capacity at 8,000 mm lifting height: 2,200 kg at a 400 mm load center 1,900 kg at a 500 mm load center 1,700 kg at a 600 mm load center MACHINE DETAILS Mast type: Triplex Mast model: TXH8000 Electric drive: 48 V Battery weight: 1,100–1,200 kg Weight without battery: approx. 3,560 kg Operating hours: 4,976 h EQUIPMENT Electric reach truck 4-way system for long loads Comfort seat Joystick control Suitable for high-rack warehouses Toyota quality vehicle Nodpfx Ajzd Rr Nomuslc Direction of travel: forward / backward / sideways Stand-on forklift Hydraulic fork adjustment 360° steering

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm Nlodpfszd Rqlox Amuoc MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Nljdpfozd Rizsx Amusc Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: G1115-0025, turning length: 2,100 mm, turning diameter: 610 mm, spindle speed (max.): 1,500 rpm, bar diameter (max.): 165 mm, controller model: Fanuc i Serie, The machine is new and has no operating hours! TECHNICAL DETAILS Turning length: 2,100 mm Maximum turning diameter: 610 mm Y-axis travel: 150 mm Spindle Speed: 1,500 rpm Maximum bar diameter: 165 mm Torque: 2,990/2,459 Nm Spindle nose: A1-15 Spindle bore: 21" 2-speed geared spindle Tool turret Tool positions: 12 x BMT 75 Speed of driven tools: 4,000 rpm Axes and tailstock Tailstock: MT #6 Tailstock stroke: 120 mm C-axis available MACHINE DETAILS Control model: Fanuc i series Power: 45/37 kW EQUIPMENT C-axis Steady rest optional Nlsdpozdztdofx Amusc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Nedpozd Afzefx Amuelc Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Nedozd Tcdjpfx Amujlc Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 80400008, clamping force: 2,800 kN, screw diameter: 45 mm, injection weight: 320 g, ejector stroke: 200 mm, opening stroke: 675 mm, Loading the machine is possible for an additional charge of €500! TECHNICAL DETAILS Clamping force: 2,800 kN Nlodpfezdiyxjx Amujc Number of components: 1 Width of clamping plate: 950 mm Height of clamping plate: 950 mm Free distance between bars, horizontal: 630 mm Free distance between bars, vertical: 630 mm Diameter of centering ring: 160 mm Minimum installation height: 330 mm Maximum installation height: 710 mm Maximum opening stroke: 675 mm Maximum ejector stroke: 200 mm Maximum tool weight: 3,700 kg Maximum tool weight, moving side: 2,500 kg MACHINE DETAILS Thread: M20 Screw diameter: EE1: 45 mm Maximum shot weight PS: EE1: 320 g Unit arrangement: EE1: horizontal EQUIPMENT Core pull, 2-fold Cascade, 6-fold Robot Note: The operating hours can be found in the last image.

Condition: used, Donaldson Torit industrial dust collection system, main silo is approx. 40' tall with 2 blower fans, includes all duct work, dust collection system includes duct work inside building, does not include dust container shown in photo, unit only, 1 blower fan has 150 HP, 3 phase motor, control panel has Allen Bradley Panel View Plus 1000 touch screen display, winning bidder responsible for proper removal. Please contact auction manager for removal information of unit. Nedpfxsxdc Tfj Amuslc

Condition: used, Year of construction: 2003, 2003 CMS, model Pentax 4.50/T/PX5, CNC cutter, gantry bridge type, working table area 205.5" x 55.5", pendant control, spindle speed 18,000 RPM, spindle connection HSK63E, double automatic tool changer with 16 places, chip removal, Zongo V-Link CNC controls, 480V, 3 phase, includes EATA industrial chiller, (1) 2003 Travaini pump system, model 0-616VN1A-400, and (1) Becker rotary vane vacuum pump with filter, includes control cabinet, winning bidder responsible for proper removal. Nsdpjxdc Ucefx Amuslc

Condition: used, Year of construction: 1995, 1995 CMS, model NC-P.F./102-2TCU, CNC, X-travel 141.7", Y-travel 63.0", Z-travel 15.7", dual tables with individual plates, plate sizes are 60" x 60", 10 HP, spindle speed up to 18,000, Allen Bradley control station, 480V, 3 phase, bridge gantry style design, 480V, 3 phase, S/N 1397, winning bidder responsible for proper removal, also includes Becker Vacuum rotary vane pump and filter, and control cabinet. Nsdpfxjxdddfe Amujlc

Condition: used, Danley Onsrud, model WT-2-1284A, 460V, 3 phase profile machine, S/N 797387-01, with push button controls, winning bidder responsible for proper disassembly and removal, includes table with assorted components, and hydraulic unit with 3 phase electric motor and 35" width x 12" height x 24" depth tank and coolant unit, also includes (1) skid of assorted parts, no other info available, winning bidder responsible for proper disassembly and removal, and capping of all wires. Nedsxdddrepfx Amuelc

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Nledpexdc T Ssfx Amusc

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Nodpjxd D Nnofx Amujlc

Condition: used, Nelmor 1436 grinder with a 100 HP, 3 phase motor, and approx. 15' 9" screw auger, winning bidder responsible for proper removal. Nljdpfx Amjxd D Nujusc

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Nedpfexd D I Rex Amuelc

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Nlsdpfxsxd D I Do Amujc

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Nlsdpfjxd D Nzox Amujc

Condition: used, Shimadzu gas chromatograph mass spectrometer and AOC-5000 autosampler, equipped with an Edwards dual-stage rotary vacuum pump. PC, monitor, keyboard, and mouse (it could not be confirmed whether the PC has suitable software and passwords). Nledozfiqyspfx Amuoc

Condition: used, Year of construction: 2018, machine/vehicle number: 0-200-08-2664, Single-sided edge banding machine in left-hand configuration, feed rate continuously adjustable: 16-25 m/min, workpiece thickness: 8-60 mm, workpiece overhang: 30 mm, sliding carriage, infeed guide rail automatic, workpiece support in scissor design, infeed stop, driven top pressure with composite V-belt, kit for small parts, release agent spray device top/bottom, joint milling unit 2x3 kW with pneumatic activation control for both motors, workpiece preheating, FE-MA-TECH pre-melting unit for PU adhesive, application unit PU 65, edge magazine for solid edges, coil and strip material, coil change device with 2 holders, servo-controlled edge feed, pressure zone C with 7 rollers and automatic adjustment, wetting device for the pressure zone, cooling/lubricant spray unit top-bottom-side, trimming unit chamfer/straight PK25 2x0.8 kW with standing trimming stop, pre-milling unit BF 20 2x1.5 kW with 3-roller sensing top/bottom vertical and pneumatic adjustment, multi-milling unit MF21 2x0.55 kW with 3-roller sensing top/bottom vertical and dual-roller sensing horizontal, profile milling unit FK30/V20 with milling unit for 3 tools, automatically switchable between co- and counter-rotation, and rolling side sensing, standard milling unit SF21 1x5 kW, multi-scraper blade MN21, automatically with 3-roller sensing top/bottom, cleaning agent spray device top/bottom, glue line scraper blade FA20 with automatic adjustment and sensing, smoothing unit FA 06 top/bottom 2x0.18 kW, special unit for profile insertion, control panel Powercontrol PC 23 Powertouch, edge tracking control. Nsdpfjzha A Esx Amuolc

Year of construction: 2014, condition: used, machine/vehicle number: A14 02 009-0040, Flat spray coating machine for solvent-based and water-based paints, working width: approx. 1,300 mm, driven infeed conveyor; width: approx. 1,300 mm, length: approx. 2,000 mm, folding infeed roller table approx. 900 mm long with a roller spacing of approx. 130 mm, mobile roller holder for protective paper, coating unit with driven conveyor belt and paper tape transport system, double carriage with 2 spray guns each, folding outfeed roller table approx. 900 mm long with a roller spacing of approx. 130 mm, mobile roller holder for protective paper, driven outfeed roller conveyor, width: approx. 1,300 mm, length: approx. 2,000 mm, roller spacing: approx. 150 mm, coating station with 2 Wagner airless pumps and shut-off valves, dry filter extraction system, central control, extraction system with explosion-proof fan and piping components. Njdozha Dcspfx Amuolc

Condition: used, Year of construction: 2009, machine/vehicle number: 0-240-10-2730, horizontal panel dividing saw with lifting table feed, cutting length: 5,600 mm, lifting table width: 2,200 mm, saw blade overhang: 130 mm, scoring unit: 2.2 kW, main saw unit: 30 kW, automatic program slider, 5 air cushion tables, electronically controlled pressure beam, angle return device, Power Concept, roller rails transverse in the lifting table, retaining device for panels, 1 additional Combiprofile rail in the rear machine table, flocked rollers, rotating device type 380/11/510, additional alignment device, pneumatic edge guide, Powercontrol control system, label printer, additional powered infeed roller conveyor with forklift recess, safety enclosure with protective fences and light barriers. Nlsdpfx Aezha Dismuoc

Condition: used, Year of construction: 2020, machine/vehicle number: 0-250-73-1509, vertical machining center, workpiece length: max. 3,050 mm, workpiece width: max. 850 mm, workpiece thickness: max. 56 mm, workpiece support area, workpiece removal area, V13 high-speed drilling unit with individually controllable vertical drilling spindles, horizontal drilling unit with 4 spindles in the X-direction, horizontal drilling unit with 2 spindles in the Y-direction, nut saw in the X-direction, tool change spindle HSK 63 with 10 kW converter, 4-position pick-up changer on the side, stop cylinder for workpiece positioning, workpiece clamping system with 1 workpiece clamping chuck in the X-direction, adjustable via ball screw, Powercontrol PC86 Powertouch control system, plausibility check for vertical machining centers. Nedpjzha Dvjfx Amuelc

Condition: used, Year of construction: 2010, machine/vehicle number: 1012267, Central dust extraction system with fans on the raw material side, 7 filter elements, total filter area 1166 m2, maximum volume flow at a filter area load of 120 m3/m2*h = 140,000 m3/h, 3 inlet openings D=400 mm on the side, 3 inlet openings on the front D=350 + D=450 + D=560 mm, bag filter elements 2.5 m long, discharge via scraper chain conveyor and cell wheel lock, pneumatic shaking device via a vibrating frame for regenerating the filter bags when the system is shut down, 1 compressed air cleaning unit with 4 motors for regenerating the filter bags during operation, 1 maintenance platform on the front with a platform and access ladder, front-side inspection doors in the cleanroom and the settling chamber, explosion flaps on the side, openings on the side for connecting the return air, dry extinguishing line, 1 Schuko dust extraction fan S 400 G/L2 22.0 kW designed for 4,947 Pa with 9,271 m3/h, 1 Schuko dust extraction fan S 450 O/L2 22.0 kW designed for 3,412 Pa with 14,100 m3/h, 1 Nordfab dust extraction fan S G5 13.3/15 kW designed for 4,209 Pa with 8,880 m3/h, 1 Nordfab dust extraction fan S G5 26/30 kW designed for 350 Pa with 18,590 m3/h, 1 Nordfab dust extraction fan S - G5 22/30 kW designed for 350 Pa with 16,020 m3/h, 1 chip transport fan. Nledozha D Ajpfx Amujc NOTE: Since the system does not have its own control cabinet, it is generally sold without a control cabinet. It can be determined on-site whether components can be removed. Piping components are not included in the scope of supply, but can largely be purchased separately.