Used ALFA LAVAL oil extraction plant 2000 Kg/h

ALFA LAVAL

Condition: used, Year of construction: 2003, machine/vehicle number: PST45, Used SAP complete Pasteurizer 5000 LPHTechnical Specifications & Performance DataThis SAP pasteurizer system is a complete continuous-flow plate-and-tube pasteurization solution for still, non-carbonated beverages. Built around an Alfa Laval/Tetra Pak Clip 6-SR sanitary plate heat exchanger, the system is designed for controlled thermal treatment of liquid food products before filling. Its configuration supports production of non-alcoholic beverages with fruit content up to 5% and can process juices containing fibers and pulp up to approximately 8% when operated with the appropriate cycle and CIP procedures.Continuous flow rate: 3,500–5,000 L/hPasteurization temperature: 80°C to 95°CHolding time: 30 to 60 secondsHeat exchanger: Alfa Laval/Tetra Pak Clip 6-SRHeat exchanger internal volume: 62.0 LDesigned operating pressure: up to 6.0 barMaximum operating temperature: up to 110°CPasteurizer dimensions: 3300 x 2050 x 2370 mmManufacturing year: 2003Advanced Automation & Control SystemsThe pasteurizer is supplied with a control cabinet incorporating PLC control, enabling coordinated management of the process equipment. The system includes automatic valves, a temperature-maintenance system, holding tubes and a dedicated safety system. Pneumatic air demand is limited to valve actuation. Electrical consumption is primarily associated with two 4 kW pumps, while PLC consumption is minimal.The associated McQuay chiller is equipped for a 380–420 V, 3N~, 50 Hz electrical supply. Its total input is 12.19 kW at 25.3 A, with a nominal cooling capacity of 33.71 kW.Production Line Integration CapabilitiesDesigned for industrial packaging and beverage production applications, this second hand pasteurization system is intended to operate upstream of filling equipment. The process arrangement maintains the required pasteurization temperature and holding time before product transfer toward the filling area. A chiller is required in conjunction with the pasteurizer to lower product temperature before filling.The water-cooled process arrangement makes this equipment suitable for integration into a used bottling line handling still beverages, fruit beverages, juices and other liquid food products requiring continuous thermal treatment. The sanitary plate construction and clip-on gasket design support hygienic operation and CIP cleaning routines.Machine Condition & Maintenance HistoryThe system was previously used for the production of non-alcoholic beverages with fruit content up to 5%. It is scheduled to be taken out of service at the end of 2025. The supplied configuration includes the pasteurizer and the required chiller for pre-filling cooling duty.No electrical schematics or layout drawings are included. The PLC has no backup system.Operational Performance & VersatilityThe Clip 6-SR heat exchanger uses sanitary stainless steel plates with glue-free clip-on gaskets. The SR configuration is suited to high-viscosity media and juices containing fibers or pulp, while maintaining low pressure drop and reducing the risk of ... Codpfj Aia D Ssx Apijri

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and cooling duties within the pasteurization process. Its dual-circuit pressure and temperature ratings support controlled operation in a process envi... Codpfxsz Ecmxj Apisri

Condition: like new (used), Year of construction: 1994, Decanter is brand new and unused. Maximum speed: 3,250 rpm Drum diameter: 353/202 mm Maximum solids density: 1.2 kg/dm³ Codpfx Ape Ah Hh Reisri

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Csdpfx Apox Aurksisri

Condition: new, Nieużywany płytowy wymiennik ciepła Alfa Laval model AQ4T-BFG o powierzchni wymiany około 15 m2. Płyty wykonane ze stali ko 316L. Ciśnienie robocze do 12 bar, przy temperaturze do 150 C. Credpe Agvzwjfx Apiei

Condition: new, Year of construction: 2022, operating hours: 550 h, functionality: fully functional, machine/vehicle number: 5132324, overall weight: 2,200 kg, Alfa Laval Foodec 219 machine, serial number 5132324, year 2022, intended for food processing in dairies. Has only been used for 500 hours since new. Can be installed anywhere in Europe. Crede Ahrhbjpfx Apiji Includes control panel, all pipes, etc., and a complete set of tools. Also includes service log and manual.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 4188894-2010, overall weight: 1,500 kg, The Alfa Laval HBPX 2000 is configured to operate with blood or fish processing glue water. No control panel is included, but a new panel can be purchased for an additional 15,000 euros. Cedpfx Apj Ahrgpeiori The machine is delivered with a complete set of tools and spare parts.

Condition: used, Year of construction: 1986, Alfa Laval Drehbürstensieb Crsdpfx Ae Ahluuepioi

Condition: used, Year of construction: 2009, The *Alfa Laval M10-MBASE* is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. *Technical Specifications* *Type:* M10-MBASE *Heat transfer area:* 2.6 m² *Plate material:* Stainless steel Alloy 316, thickness 0.50 mm *Gasket material:* NBRFF Clip-On (Nitrile rubber) *Plate pack thickness:* 63 mm *Total weight:* 232 kg *Total volume:* 13 liters *Dimensions:* Height 672 mm, width 618 mm, depth 530 mm *Connection standard:* DIN NW100 *Bolts:* M20 *Expandable:* up to 17 additional plates *Operating Data* Credpo Ahlr Djfx Apioi *Design pressure:* 10 bar *Test pressure:* 14.3 bar *Design temperature:* up to 120 °C *Minimum temperature:* 0 °C *Typical flow examples (according to datasheet):* Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) *Design Features* *Plates with parallel flow channels* ensure high efficiency and low pressure drop. *Clip-on gaskets* for easy maintenance and cleaning. *Robust frame and pressure plate construction* with M20 tightening bolts (length 360 mm). *Flexible capacity expansion*, up to 17 additional plates can be installed. *User-friendly assembly* with clear A/B plate markings. *Typical Applications* Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Condition: used, Year of construction: 2003, Capacity: up to 25.000 l/h Codj Ahk S Tspfx Apiori