Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,010 mm, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 93 m³, first registration: 05/2016, suspension: air, tire size: 385/65-R22.5, Year of construction: 2016, Equipment: ABS, = Other options and accessories = - EBS - Rear doors - Air suspension - Disc brakes - Sunroof = Remarks = nice 2016 SCHMITZ CARGOBULL sliding curtain trailer, ROTOS axles with disc brakes, ABS/EBS, Code XL, galvanized chassis, sunroof, portal doors, 2x 8 stake pots in the side beams, 2x 15 lashing eyes in the side beams, Multilock, sliding tarpaulins with 24 vertical slats per side, int. 13.63x2.48x2.75m, 385/65-R22.5 tires (L: 11/10/11mm; R: 10/11/13mm), empty weight: 7,315 kg, maximum mass: 39,000 kg, Dutch registration with valid TÜV approval (APK) until June 9, 2025 = More information = Axle configuration Tyre size: 385/65-R22.5 Axle brand: SCHMITZ ROTOS DISC Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; tire profile left: 70%; tire profile right: 60% Rear axle 2: Max. axle load: 9000 kg; tire profile left: 60%; tire profile right: 70% Rear axle 3: Max. axle load: 9000 kg; tire profile left: 70%; Tire profile right: 85% Dimensions Dimensions (L x W x H): 1389 x 255 x 400 cm Cgjlov Hxbzsiqdd Eet Weights Empty weight: 7,315 kg Payload: 31,685 kg GVW: 39,000 kg Functional Brand of the body: Schmitz Cargobull SCB*S3T Sliding roof: Yes Maintenance, history and condition APK (main technical inspection): checked until 06.2025 Technical condition: very good Visual condition: very good Identification License plate: OP-77-GP

Condition: used, overall weight: 39,500 kg, maximum load weight: 33,950 kg, axle configuration: 3 axles, first registration: 03/1996, Year of construction: 1996, total width: 2,470 mm, Information in German More options and accessories * Homepage * Lift axle More information General information Configuration: Container transport License plate: OD-84-VR Axle configuration Brakes: Drum brakes Rear axle 1: Max. axle load: 9000 kg, left tire profile: 30%, right tire profile: 30% Rear axle 2: Max. axle load: 9000 kg, left tire profile: 30%, right tire profile: 30% Rear axle 3: Max. axle load: 9000 kg, left tire profile: 30%, right tire profile: 30% Dimensions Wheelbase: 75 cm Condition General condition: good Technical condition: good Visual condition: good----Information in Dutch Related options and accessories * Homepage * Liftas Sea information General information Opbouw: container transport Kenteken: OD-84-VR Asconfiguration Remmen: drum remmen Achteras 1: Max. aslast: 9000 kg, board profile left: 30%, board profile right: 30% Achteras 2: Max. aslast: 9000 kg, board profile left: 30%, board profile right: 30% Achteras 3: Max. aslast: 9000 kg, board profile left: 30%, board profile right: 30% Maten Wheel base: 75 cm State Algemene state: goed Technical state: goed Optical state: goed Requirements information SEMTRADE TRUCKS & TRAILERS Transport route 21a 2676LM Maasdijk / Follow us on Facebook: Coliqddewd Dflj Eogt

Condition: used, overall weight: 39,000 kg, maximum load weight: 31,120 kg, axle configuration: 3 axles, first registration: 04/2011, next inspection (TÜV): 12/2024, Equipment: ABS, STAS Walkingfloor TYPE: S 300 ZX * Registration: 04/2011 * BPW axles Celevxmkheiqdd Eogt * Tires approx. 50-70% * NO TÜV!!! * Roll-up tarpaulin * German vehicle 2 available!

Condition: used, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 03/2020, Year of construction: 2020, total width: 2,600 mm, total height: 2,650 mm, ID: 12984-924887 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 240 l Electronic brake system EBS Anti-lock braking system ABS SAF (disc brakes) Thermometer Ventilation flap, small, at rear, right side, half way up Contact switch for rear door Low noise aluminium floor, suitable for PIEK floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Length/width/heigth - 1341cm/249cm/265cm Max weight - 36 000 kg Own weight - 8 847 kg 3 axles Pallet rack for 36 Euro pallets Cgeliqddewcvxbe Est

Condition: used, axle configuration: 3 axles, wheelbase: 8,710 mm, first registration: 05/2014, suspension: air, color: green, tire size: 385/65, Year of construction: 2014, Axle Configuration Tire Size: 385/65 Axle Brand: SAF CD Celieuukzljqdd Ejgt Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Alloy Wheels; Lift Axle; Max. Axle Load: 9000 kg; Left Tire Tread: 40%; Right Tire Tread: 40% Rear Axle 2: Alloy Wheels; Max. Axle Load: 9000 kg; Left Tire Tread: 60%; Right Tire Tread: 60% Rear Axle 3: Alloy Wheels; Max. Axle Load: 9000 kg; Left Tire Tread: 60% Right-hand tire tread: 60% Dimensions Dimensions (L x W): 1162 x 255 cm Weights Unladen weight: 6,700 kg Payload: 32,300 kg GVW: 39,000 kg Identification License plate: ON-49-HN Further information Contact Bob Beukers for further information.

Condition: used, overall weight: 34,000 kg, empty load weight: 6,340 kg, maximum load weight: 27,660 kg, axle configuration: 3 axles, first registration: 05/2017, suspension: air, color: grey, mileage: 100 km, gearing type: mechanical, Equipment: ABS, Unladen weight: 6340 kg, permissible total weight: 34000 kg, air suspension, Schwarzmüller J-Series built in 2017, BPW axles, sliding tarpaulin, Joloda sliding roof. Non-binding offer, subject to errors and prior sale. Illustration may not correspond to the offer. Colewgtryjiqdd Esgt

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,010 mm, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 93 m³, first registration: 05/2016, suspension: air, tire size: 385/65-R22.5, Year of construction: 2016, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear Doors - Air Suspension - Disc Brakes - Sunroof = Remarks = Beautiful 2016 SCHMITZ CARGOBULL sliding curtainsider trailer, ROTOS axles with disc brakes, ABS/EBS, Code XL, galvanized chassis, sunroof, portal doors, 2x 8-post cups in the side rails, 2x 15-point lashing eyes in the side rails, Multilock, sliding tarpaulins with 24 vertical slats per side, internal dimensions 13.63 x 2.48 x 2.75 m, 385/65-R22.5 tires (L: 14/16/9 mm; R: 16/15/14 mm), unladen weight: 7,315 kg, maximum mass: 39,000 kg, Dutch registration with valid TÜV (APK) approval until June 2, 2025 = Further information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SCHMITZ ROTOS DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire profile left: 90%; Tire profile right: 100% Rear axle 2: Max. axle load: 9000 kg; Tire profile left: 100%; Tire profile right: 95% Celiqev Hctujdd Eogt Rear axle 3: Max. axle load: 9000 kg; Tire profile left: 55%; Right-hand tire tread: 90% Dimensions Dimensions (L x W x H): 1389 x 255 x 400 cm Weight Unladen weight: 7,315 kg Payload: 31,685 kg GVW: 39,000 kg Functional Body brand: Schmitz Cargobull SCB*S3T Sliding roof: Yes Condition Technical condition: very good Visual condition: very good Identification License plate: OP-75-GP

Condition: used, overall weight: 36,000 kg, maximum load weight: 24,620 kg, axle configuration: 2 axles, first registration: 02/2002, total width: 2,550 mm, total height: 1,900 mm, Equipment: ABS, Forced steering: 2 axles, twin tires, SAF axles, steering axle, used vehicle Vehicle number 3125, ALB ABV, air suspension, wooden and metal loading floor with lashing eyes, stake pockets, loading/low bed length: 6,400 mm, telescopic by 4,250 mm, extendable, 2 forced steering axles with radio remote control, SAF axles, twin tires, tire size: 245/70R 17.5, central lubrication system, NATO can, curb weight: 11,380 kg, weight: 36,000 kg, please contact us for inquiries. Errors and prior sale excepted. Celiqswf Tn Esdd Eogt

Condition: used, overall weight: 35,000 kg, maximum load weight: 26,170 kg, axle configuration: 3 axles, first registration: 06/2015, next inspection (TÜV): 10/2025, ORTEN SG 35 Beverage Transport Auto-Step-Star Gooseneck Trailer Electric Hydraulic Lifting Wall System Cargo: Palletized Barrel Crates * Registration: June 2015 Coliqsv Swagodd Esgt * 1 offset * Code XL Load Securing System * Hydraulic Jacks * BPW Eco Axles * Tires approx. 50-60% * Steel Floor with Tie-Down Eyes * Loading Area 1: L 7,200 mm x H 3,100 mm x W 2,450 mm * Loading Area 2: L 4,200 mm x H 2,600 mm x W 2,450 mm * Load Securing System Valid Until October 2025 * German Vehicle

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,470 mm, first registration: 04/2013, suspension: air, tire size: 385/55, Year of construction: 2013, Refrigeration unit brand: Thermo King = Further information = Axle configuration Tire size: 385/55 Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire profile left: 45%; Tire profile right: 45% Rear axle 2: Max. axle load: 9000 kg; Tire profile left: 45%; Tire profile right: 45% Rear axle 3: Max. axle load: 9000 kg; Tire profile left: 45%; Tire tread depth on the right: 45% Dimensions Dimensions (L x W): 1405 x 260 cm Weight Curb weight: 10,650 kg Payload: 33,350 kg GVW: 45,000 kg Csliqdjvub S Eed Eegt Functional Engine: Diesel and electric (9,173 diesel operating hours) Condition Technical condition: very good Visual condition: very good Further information Contact Maarten Busser or Niels Busser for further information.

Condition: used, axle configuration: 3 axles, first registration: 09/2009, suspension: steel, Year of construction: 2009, Low loader 47 tons - 2.75 m wide - can be widened to 3.25 m - Adjustable ramps - Bed 8.60 m - Raised bed 82 cm - Total weight 46,900 kg - Unladen weight 9750 kg - = Further information = Cgolev Erzfjiqdd Eet Suspension: leaf suspension Unladen weight: 9,750 kg Payload: 37,150 kg GVW: 46,900 kg Loading area height: 82 cm Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, nearby the port of Antwerp. Opening hours: Monday till Friday continuously from 8.30 am to 19.00 pm.

Condition: used, overall weight: 34,000 kg, empty load weight: 7,100 kg, maximum load weight: 26,900 kg, axle configuration: 3 axles, wheelbase: 1,350 mm, first registration: 08/2014, suspension: air/air, color: silver, mileage: 100 km, gearing type: mechanical, Equipment: ABS, Empty weight: 7100 kg, permissible total weight: 34000 kg, air-air suspension, electronic braking system EBS, Schwarzmüller tipping body K-series, internal dimensions L 11.49 x H 2.264 x W 2.48, height measured on tarpaulin, TUV NEW!! Roll tarpaulin, BPW axles! Aluminum rims, dead weight 7100 KG, Non-binding offer, errors and prior sale excepted. Illustration may not necessarily correspond to the offer. Cjlswgtrajiqdd Ejgt

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,010 mm, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 93 m³, first registration: 04/2016, suspension: air, tire size: 385/65-R22.5, Year of construction: 2016, Equipment: ABS, = Other options and accessories = - EBS - Rear doors - Air suspension - Disc brakes - Sunroof = Remarks = nice 2016 SCHMITZ CARGOBULL sliding curtain trailer, ROTOS axles with disc brakes, ABS/EBS, Code XL, galvanized chassis, sunroof, portal doors, 2x 8 stake pots in the side beams, 2x 15 lashing eyes in the side beams, Multilock, sliding tarpaulins with 24 vertical slats per side, int. 13.63x2.48x2.75m, 385/65-R22.5 tires (L: 13/17/16mm; R: 16/17/15mm), empty weight: 7,315 kg, maximum mass: 39,000 kg, Dutch registration with valid TÜV approval (APK) until July 3rd, 2025 = More information = Axle configuration Tyre size: 385/65-R22.5 Axle brand: SCHMITZ ROTOS DISC Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; tire profile left: 80%; tire profile right: 100% Rear axle 2: Max. axle load: 9000 kg; tire profile left: 100%; tire profile right: 100% Rear axle 3: Max. axle load: 9000 kg; tire profile left: 100%; Tire profile right: 95% Dimensions Dimensions (L x W x H): 1389 x 255 x 400 cm Weights Empty weight: 7,315 kg Payload: 31,685 kg GVW: 39,000 kg Functional Brand of the body: Schmitz Cargobull SCB*S3T Sliding roof: Yes Maintenance, history and condition APK (main technical inspection): checked until 07.2025 Cjlev E Rh Rjiqdd Esgt Technical condition: very good Visual condition: very good Identification License plate: OP-11-GK

Condition: used, overall weight: 48,000 kg, maximum load weight: 38,300 kg, axle configuration: 3 axles, first registration: 06/2022, next inspection (TÜV): 07/2024, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Cgolovl N Rdoiqdd Est * Loading area in extendable design * JOST saddle supports (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * BPW axles and suspension, 2 axles rigid, 1 axle with self-steering * Air suspension with lifting and lowering valve * Tires 235/75 R 17.5 3PMSF * Braking system in accordance with EU regulations with EBS-E (2S2M) * 2 inch kingpin * A galvanized steel front wall, approx. 400 mm high * Galvanized extensions, extendable by approx. 230 mm on each side * Aluminum side walls that can be plugged onto the gooseneck * 1 galvanized tool box, integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container * 6 pairs of stake pockets in the outer frame of the loading area * Lift axle on the front axle with control by TEBS E * A pair of one-piece aluminum ramps approx. 2,500 x 600 mm, ramps with spring lifting mechanism, manually movable, maximum load per pair: 24,000 kg (+360 kg) * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Load gauge for determining the axle loads including load diagram * HRM metallization (High Resistance Metallization) * Single-color paintwork in RAL 3002 carmine red

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,010 mm, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 93 m³, first registration: 04/2016, suspension: air, tire size: 385/65 R22.5, Year of construction: 2016, Equipment: ABS, = Other options and accessories = - EBS - Rear doors - Air suspension - Disc brakes - Sunroof Cgoliqddov Hxwps Ejt = Remarks = nice 2016 SCHMITZ CARGOBULL sliding curtain trailer, ROTOS axles with disc brakes, ABS/EBS, Code XL, galvanized chassis, sunroof, portal doors, 2x 8 stake pots in the side beams, 2x 15 lashing eyes in the side beams, Multilock, sliding tarpaulins with 24 vertical slats per side, int. 13.63x2.48x2.75m, 385/65-R22.5 tires (L: 15/11/14mm; R: 16/9/14mm), empty weight: 7,315 kg, maximum mass: 39,000 kg, Dutch registration with valid TÜV (APK) approval until July 10, 2025 = More information = Axle configuration Axle brand: Schmitz Rotos Brakes: disc brakes Suspension: air suspension Rear axle 1: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 95%; Tire profile right: 100% Rear axle 2: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 70%; Tire profile right: 55% Rear axle 3: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 90%; Tire profile right: 90% Dimensions Dimensions (L x W x H): 1389 x 255 x 400 cm Weights Empty weight: 7,315 kg Payload: 31,685 kg GVW: 39,000 kg Functional Brand of the body: Schmitz Cargobull SCB*S3T Sliding roof: Yes Maintenance, history and condition APK (main technical inspection): checked until 07.2025 Technical condition: very good Visual condition: very good Identification License plate: OP-08-GK

Condition: new, overall weight: 102,000 kg, maximum load weight: 85,949 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * Hydraulically raise/lower and retractable gooseneck. Length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings on the middle section of the gooseneck (LC 10,600 daN) 2-axle front chassis * 2-axle compact front chassis: Hook attachments at the front and rear. Length: approx. 2,200 mm, chassis width: approx. 2,850 mm * 1 pair of lashing rings at the front (LC 10,600 daN) * 1 pair of lashing rings at the rear, on the hook receptacle (LC 16,000 daN) Excavator Bridge BB-A (2+4) * Telescopic excavator bridge BB-A with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm * 5 pairs of hanging lashing rings (LC 10,600 daN) 4-axle rear-mounted chassis * Mechanical bolt-and-link coupling for attaching a lowbed at the front * Rear end cross member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm * 2 pairs of retractable lashing rings (LC 10,000 daN) * 1 pair of retractable lashing rings (LC 5,000 daN) * 3 pairs of 2-ton lashing points for tensioning straps * 3 pairs of lashing rings horizontally mounted in the chassis (LC 10,600 daN) Steering * Front and rear steering controlled via pushbuttons using a wired remote control, with axle alignment control (without installation in the tractor unit) Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with two coats of 2K topcoat, solid color in RAL 3002 Carmine Red according to RAL system 841GL Pendulum axle, 2-axle front chassis * Pendulum axle, all axles hydromechanically steered. Technical axle load: 12,000 kg each * Hydraulic axle compensation Tires, front chassis * 8x at manufacturer's discretion (M+S) 285/70 R19.5 Pendulum axle, 4-axle rear chassis * Pendulum axle, all axles hydromechanically steered. Technical axle load: 12,000 kg each * Hydraulic axle compensation Rear chassis tires * 16x at manufacturer's discretion (M+S) 285/70 R19.5 load index 150/148J Accessories included * Yellow-red air couplings on the galvanized front connection strip * Steel bulkhead ± 400 mm high * Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending the supply lines. The tractor unit's tank must hold at least 80 l with MAX Trailer couplings * 3.5 kingpins * BEKA-MAX central lubrication system for a gooseneck with standard NLGI-2 grease * Aluminum side walls and rear wall, ± 400 mm high, anodized, attachable to the gooseneck * BEKA-MAX central lubrication system for a 2-axle chassis with NLGI-2 grease * Foldable extensions with steel mattresses, adjustable in width from ± 2,850 mm to ± 3,250 mm * Rear chassis with trough Cgelijuvbdtjqdd Ejt * One locking point every ± 500 mm on the extension with mechanical locking * BEKA-MAX central lubrication system for a 4-axle chassis with NLGI-2 grease Including special accessories * Two stainless steel tool boxes (855 x 340 x 390 mm) on the left and right gooseneck * Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 hp) at 3,000 rpm. Emissions standard: EU Stage V.

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,010 mm, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 93 m³, first registration: 05/2016, suspension: air, tire size: 385/65 R22.5, Year of construction: 2016, Equipment: ABS, = Other options and accessories = - EBS - Rear doors - Air suspension - Disc brakes - Sunroof = Remarks = nice 2016 SCHMITZ CARGOBULL sliding curtain trailer, ROTOS axles with disc brakes, ABS/EBS, Code XL, galvanized chassis, sunroof, portal doors, 2x 8 stake pots in the side beams, 2x 15 lashing eyes in the side beams, Multilock, sliding tarpaulins with 24 vertical slats per side, int. 13.63x2.48x2.75m, 385/65-R22.5 tires (L: 10/17/14mm; R: 16/11/11mm), empty weight: 7,315 kg, maximum mass: 39,000 kg, Dutch registration with valid TÜV approval (APK) until June 12, 2025 = More information = Axle configuration Axle brand: Schmitz Rotos Coljv E N Eboiqdd Eogt Brakes: disc brakes Suspension: air suspension Rear axle 1: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 65%; Tire profile right: 100% Rear axle 2: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 100%; Tire profile right: 70% Rear axle 3: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 90%; Tire profile right: 70% Dimensions Dimensions (L x W x H): 1389 x 255 x 400 cm Weights Empty weight: 7,315 kg Payload: 31,685 kg GVW: 39,000 kg Functional Brand of the body: Schmitz Cargobull SCB*S3T Sliding roof: Yes Maintenance, history and condition APK (main technical inspection): checked until 06.2025 Technical condition: very good Visual condition: very good Identification License plate: OP-80-GP

Condition: used, overall weight: 42,000 kg, maximum load weight: 34,200 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, first registration: 05/2023, next inspection (TÜV): 06/2025, total width: 2,550 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Frame * Regular ladder frame in lightweight steel construction with through-hole cross members * Line load max. 30 t evenly distributed over approx. 1.5 m above the payload center of gravity * Coupling plate approx. 8 mm thick, with a 2 inch kingpin in accordance with DIN 74080 / ISO 337 * Coil trough length i.L. approx. 9,000 mm (shape according to VDI guideline 2700) for holding coils with a diameter of min. 900 mm to max. 2,100 mm Chassis * Axle lift mechanism on axle 1 * Fully automatic control of the axle lift, load-dependent Start-up aid * Activation via 3x brake, 30% overload up to a speed of 25 km/h * Operation on the chassis via switch * Also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC * with disc brakes Ø approx. 430 mm, ET 120 * Air suspension with approx. 180 mm stroke Vehicle tires * 6-fold 385/65 R 22.5, 160J * 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis attachments * Mechanical seat supports with leveling foot, 24 t lifting capacity, one-sided operation on the right in the direction of travel * Splash protection system (spray suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle unit with 385/65 R22.5 tires, consisting of 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with mud flaps between the 1st and 2nd axles and 1 pair of quarter-circle mudguards with mud flaps behind the axles * Side protection device in accordance with ECE-R73 * Storage for 8 square tube insert stanchions, dimensions i.L.: approx. 340 x 220 x 2,150 mm, installed behind the axle unit * 2 plastic tool boxes, waterproof, dimensions (inside) approx. 545 x 400 x 400 mm. Installation at the rear 1x left and 1x right Brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * Air suspension system including 1 lifting and lowering valve, mounted on the left behind the axle unit in the direction of travel * Driving position is set automatically Floor * Mounted version on both sides * Pallet stop strips made of steel with VarioFix hole pattern (screwed), left and right in the direction of travel, for width i.L. approx. 2,468 mm (loading height in the longitudinal direction under the outer beam is reduced by approx. 20 mm) * Panel floor approx. 30 mm thick, plywood glued several times, recessed in the area of the coil tray * Coil tray side walls covered with plywood panels approx. 18 mm thick * Floor grouted all around Coil tray cover made entirely of wood, with panel floor approx. 27 mm thick * Stake pockets for square tube insert stakes approx. 80 x 80 mm, arrangement as per drawing A2, 2 pairs on the longitudinal beam in 1st and 2nd position, 8 pairs in the outer frame * 8 pairs of stake pockets in the coil tray to accommodate square tube insert stakes approx. 80 x 80 mm, arrangement: 1st pair at the beginning of the tray at the front, 2nd - 7th pair as per series drawing, 8th pair at the end of the tray Colijvl N N Teqdd Eogt Construction * Quick-release device at the front for Side tarpaulin with tensioning shafts and deflection lever * Quick-release device at the rear for side tarpaulin with tensioning shafts and ratchet * Meets structural strength requirements in accordance with EN 12642 XL (VDI 2700), tested for a payload of approx. 27,000 kg Rear wall * Double-wing rear wall portal door made of aluminum, approx. 2,630 mm i.L

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,010 mm, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 93 m³, first registration: 05/2016, suspension: other, tire size: 385/65 R22.5, Year of construction: 2016, Equipment: ABS, = Other options and accessories = - EBS - Rear doors - Air suspension - Disc brakes - Sunroof = Remarks = nice 2016 SCHMITZ CARGOBULL sliding curtain trailer, ROTOS axles with disc brakes, ABS/EBS, Code XL, galvanized chassis, sunroof, portal doors, 2x 8 stake pots in the side beams, 2x 15 lashing eyes in the side beams, Multilock, sliding tarpaulins with 24 vertical slats per side, int. 13.63x2.48x2.75m, 385/65-R22.5 tires (L: 13/10/13mm; R: 14/17/13mm), empty weight: 7,315 kg, maximum mass: 39,000 kg, Dutch registration with valid TÜV approval (APK) until June 29, 2025 = More information = Axle configuration Axle brand: Schmitz Rotos Brakes: disc brakes Rear axle 1: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 80%; Tire profile right: 90%; Suspension: air suspension Rear axle 2: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 65%; Tire profile right: 100%; Suspension: hydraulic suspension Rear axle 3: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire profile left: 80%; Tire profile right: 80%; Suspension: air suspension Dimensions Dimensions (L x W x H): 1389 x 255 x 400 cm Weights Empty weight: 7,315 kg Payload: 31,685 kg GVW: 39,000 kg Functional Brand of the body: Schmitz Cargobull SCB*S3T Sliding roof: Yes Maintenance, history and condition APK (main technical inspection): checked until 06.2025 Technical condition: very good Visual condition: very good Identification Cgolev E Nuvjiqdd Eot License plate: OP-79-GP

Condition: new, overall weight: 45,000 kg, maximum load weight: 36,755 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Loading area * Loading area in extendable design with pneumatically operated locking * Loading area with approx. 30 mm thick wooden floor framed in omega profiles * 10 pairs of lashing rings, foldable (LC 2 500 daN) * 7 pairs of lashing rings, foldable outwards (LC 5 000 daN) * 3 pairs of lashing rings, foldable outwards (LC 10 000 daN) * Loading area width of approx. 2,480 mm Seat supports * JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Axles * BPW axles, air-sprung, with disc brakes (approx. 430 mm), with lifting/lowering function (ET 120) * Self-steering axle with electro-magnetic reversing lock via Reverse gear or manually activated * Axle tool Tires * Tires 385/65 R 22.5 Brake system * Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Cjlovxc Rwjiqdd Ejgt Incl. the following additional equipment * Yellow-red air couplings on the galvanized connection strip at the front * 2 inch kingpin * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * European reflector signs (red-yellow) on the rear of the trailer * Loading area with approx. 30 mm thick wooden floor framed in omega profiles * Storage for approx. 1,000 mm long plug-in stanchions in the central support at the rear * 1 spare wheel holder under the loading area on the left in the direction of travel * A bracket for a rotating beacon at the rear of the trailer * A bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket * Load gauge for determining the axle loads, including load diagram * A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Foldable aluminum side walls with wing doors at the rear (anodized), on the side of the loading area, approx. 600 mm high, with KINNEGRIP folding stanchions * Bracket for aluminum side walls, under the loading area in front of the axles * Bracket for KINNEGRIP stanchions, under the loading area behind the axles * 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Ram protection on the right and left of the rear cross member * 6 pairs of WADER container pockets in the loading area, for 1x 20' container, 2x 20' container or 1x 40' container * A tool box made of stainless steel, approx. 600 x 350 x 600 mm, under the loading area on the left in the direction of travel * 4 pairs of stake pocket strips mounted lengthways on the loading area, for 100 x 50 mm stakes * Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status * A bracket for a rotating beacon on the warning signs * An acoustic warning signal when reversing * 2 LED reversing lights mounted on the rear panel * HRM metallization (High Resistance Metallization) of the outer frame

Condition: used, overall weight: 48,000 kg, maximum load weight: 36,300 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2025, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Loading area in double extendable design with pneumatically operated locking * A fixed intermediate table approx. 250 mm wide is mounted on the middle support * BPW axles and suspension, all axles hydro-mechanically forced steered * Air suspension with lifting and lowering valve * Tires 385/65 R 22.5 * JOST saddle supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Cgeliqddspkx Eae Est * Braking system in accordance with EU regulations with EBS-E (2S2M) * Disc brakes * 2 inch kingpins * Electro-hydraulic unit * Steering from the front and rear using a cable remote control * 10 pairs of stake pockets for stakes approx. 100 x 50 mm in the outer frame of the loading area * Load pressure gauge for determining the axle loads including load diagram * One galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' container or 1 x 40' container, an additional locking point is provided in the extension for a 45' container * 5 pairs of stake pocket strips mounted across the loading area * Storage for max. 9 pairs of stakes approx. 100 x 50 mm, inside on the bulkhead * One INOX tool box each, approx. 1,200 x 460 x 550 mm, at the front under the loading area on the left and right * Central lubrication system with 2 BEKAMAX pumps (Pico) * 2 LED reversing lights mounted on the rear panel * An acoustic warning signal when reversing * Ram protection on the right and left of the rear cross member * 2 pairs of Ferry rings under the gooseneck and 2 pairs at the rear * HRM metallization (High Resistance Metallization) * Single-color painting in RAL 3002 carmine red

Condition: used, overall weight: 48,000 kg, maximum load weight: 36,210 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 10/2025, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * in extendable version with rear bevel approx. 1,000 mm x 8° * Can be raised and lowered hydraulically after the gooseneck, length approx. 2,800 mm * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) Cjlovzi E Hsiqdd Eogt * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings that can be folded inwards on the central support at the front (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2000 daN) * Grating flooring C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) * Checkered sheet covering above the axles Two-part steel ramps * A pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating covering C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable and unfoldable ramp sections * Hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: approx. 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position do not have to be taken into account in the vehicle length of 16,500 mm Axles * BPW axles and Suspension * 2 axles rigid, 1 axle with self-steering * Technical axle load: 12,000 kg each * Electro-magnetic reversing lock can be activated via reverse gear and manually Air suspension * with lifting and lowering valve Tires * 235/75 R 17.5 Seat supports * JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Brake system * in accordance with EU regulations with EBS-E (2S2M) * without connecting lines to the tractor unit Paintwork * First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel construction * made of high-strength fine-grain steel * Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included * 2 inch kingpin * A galvanized steel bulkhead, approx. 400 mm high * A spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 brake shoes with holder on the bulkhead * Galvanized folding supports under the slope of the loading area * A bracket for a rotating beacon at the rear of the trailer * Grating in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in the slope of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Cover plates to bridge the free space between ramps and loading area * A painted layer of sand on the checker plates, above the kingpin and the loading area as anti-slip protection * Yellow reflective tape in accordance with EU regulations on the side and rear of the trailer * Elec

Condition: used, overall weight: 48,000 kg, maximum load weight: 38,390 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. * Extendable loading platform with pneumatically operated locking mechanism * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of folding lashing rings (LC 5,000 daN) * 2 pairs of folding lashing rings (LC 10,000 daN) * JOST semi-trailer supports (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 245/70 R 17.5 3PMSF * BPW axles and suspension * 2 rigid axles, 1 self-steering axle * Air suspension with lifting and lowering valve * Braking system in accordance with EU regulations with EBS-E (2S2M) * Load gauge for determining the Axle loads including load diagram * 2-inch kingpins * One galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high * Galvanized extensions, extendable by approx. 230 mm per side * 6 pairs of WADER container pockets in the loading area, for 1 x 20' containers, 2 x 20' containers, or 1 x 40' containers flush with the rear Cgeliqddjli U U Eo Ejt * 10 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading area * 3 pairs of stake pocket rails mounted crosswise in the loading area, for plug-in stakes, approx. 100 x 50 mm * One stainless steel toolbox mounted crosswise under the loading area, approx. 565 x 290 x 810 mm * Bracket for aluminum landing ramps, crosswise under the loading area behind the axles * Movable suspension rails for aluminum landing ramps at the rear of the vehicle * 2 LED reversing lights mounted on the rear panel * HRM (High Resistance Metallization) coating on the outer frame * Painted in solid color RAL 3002 carmine red

Condition: used, overall weight: 48,000 kg, maximum load weight: 36,300 kg, axle configuration: 3 axles, first registration: 07/2023, next inspection (TÜV): 09/2025, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Loading area Loading area in double extendable version with pneumatically operated locking * A fixed intermediate table approx. 250 mm wide is mounted on the middle support * 8 pairs of lashing rings that can be folded outwards (LC 5,000 daN). * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2,000 daN) Axles BPW axles and suspension, all axles hydro-mechanically forced steered * With disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tool. Tires * Tires 385/65 R 22.5 Seatposts JOST seatposts (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Warning signs On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs, including a socket Steel construction Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2 Components (2K) Top coat in a single color in RAL 3002 carmine red * Rims in silver * Attachments of the manufacturer’s choice * Rear section metallized and painted in RAL 9010 (pure white) Incl. the following additional equipment 2 inch kingpin Cjljvcviusiqdd Esgt * Electro-hydraulic unit * Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, (without installation in the tractor unit) * Yellow-red air couplings on the galvanized connection strip at the front * A bracket for a rotating beacon at the rear of the trailer * Loading area with approx. 30 mm thick wooden floor framed in omega profiles * 10 pairs of stake pockets for stakes approx. 100 x 50 mm in the outer frame of the loading area * 1 spare wheel holder under the loading area on the right in the direction of travel * Load pressure gauge for determining the axle loads including load diagram * A galvanized Steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' container or 1 x 40' container * An additional locking point is provided in the extension for a 45' container * 5 pairs of stake pocket strips mounted across the loading area, for plug-in stakes 100 x 50 mm * Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall * Access ladder mounted on the left and right in the direction of travel * One INOX tool box, approx. 1,200 x 460 x 550 mm, at the front under the loading area on the left in the direction of travel * One INOX tool box, approx. 1,200 x 460 x 550 mm, under the loading area on the right in the direction of travel * Spiral cable for supplying the electro-hydraulic unit (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with plug connection (NATO-NATO) * Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump * Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position

Condition: used, overall weight: 38,000 kg, maximum load weight: 25,550 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2025, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Csliqdevxc R Dod Esgt Gooseneck * hydraulically raised/lowered and removable Low bed * Low bed designed as an extendable tank bridge in a low construction Chassis * Rear chassis in short version with excavator trough * BPW axles and suspension, all axles hydro-mechanically forced steered * Air suspension with raising and lowering valve * Axle tool * Tires 235/75 R 17.5 twin tires. Load index 143/141J (144/144F) * WABCO brand brake system * EBS-E in accordance with EU regulations Accessories * Steel bulkhead, pluggable, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling the hydraulic processes * 2 inch kingpin * The outer supports of the low bed are provided with a painted layer of sand as a slip protection * 2nd driving height for upper driving position, max. ± 50 mm from the normal driving position * Steering can be operated from the front and rear using a cable remote control via push buttons * 2 axle load gauges mounted on the left side * Hydraulic connections from the gooseneck to the low bed with multi-coupling * Hanging rail for loose aluminum ramps at the front of the loading area between the low bed claws * Removable loading floor with approx. 30 mm thick hardwood covering, can be inserted between the outer supports * Foldable Widenings, by approx. 230 mm per side * Widening planks, loose, framed in steel * 5 pairs of stake pockets on the outside of the outer supports of the loading area * Central lubrication system with 2 pumps, brand BEKAMAX, with normal grease according to NLGI-2 * Preparation for screw-on container positioning for 1x 20' or 1x 40' * Aluminum side walls that can be folded on the gooseneck and plug-in aluminum rear wall * Complete HRM metallization (High Resistance Metallization) * Single-color paintwork in RAL 3002 carmine red