Used working platform semitrailers for sale (71)

Condition: used, first registration: 03/2002, next inspection (TÜV): 03/2027, Equipment: ABS, Export only Sale only abroad Isdpsy Dmq Dofx Ad Eetf SPR 324 Kotschenreuther 3 axles

Condition: used, maximum load weight: 36,090 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space length: 13,630 mm, loading space width: 2,490 mm, total width: 2,550 mm, Year of construction: 2021, Equipment: ABS, 3-Axle Kögel S 24-1 Flatbed Semi-Trailer VIN: 268290 Chassis / Attachments: * Air suspension // Raise and lower * Lift axle * Kögel landing legs * 3 x Kögel Trax axles with disc brakes * Tyres: 385/65 R22.5 * Remaining tread: Front ~90% / Middle ~90% / Rear ~90% * Pallet box * 2 x PVC toolboxes Body: * Flatbed for timber transport * Headboard height: 2,600 mm * Pallet box * 8 x stake pockets per side integrated into the outer frame * 8 x stake pockets 2 x centrally for insertable stakes * At the front, 2 x stake pockets each beside the main frame, inside * 12 x insertable stakes * Multilock * 13 x lashing rings per side Weights: * Gross weight: 42,000 kg * Unladen weight: 5,910 kg * Payload: 36,090 kg Miscellaneous: * German semi-trailer * Main inspection and SP valid until 02/2027 * TOP condition * Tyres 90% ---- New main inspections / safety checks or weight reductions/increases possible upon request. We are happy to assist you in obtaining export/transfer license plates, and transport of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing & typographical errors. Subject to changes, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. With many years of experience in reconditioning and trading commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 sqm², you will find a wide variety of vehicles. Our company philosophy is characterized by fairness and reliability. Customer satisfaction is very important to us, which is why we offer an excellent all-round service package and provide you with a competent contact for buying or selling vehicles. Iedpfx Ajy Dmitod Estf See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary plates / export license plates We are happy to help you obtain export/temporary license plates.

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: Ijdpfjy Auhzsx Ad Eetf * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 38,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Selection of features. Complete equipment details upon request. EQUIPMENT: * Gooseneck, length approx. 4,100 mm, with central beam * Extendable load area, length approx. 9,400 mm, with 350 mm x 10° rear bevel and integrated hook-in rail for use with separate aluminum loading ramps * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the selected platform length * Technical fifth wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS Tire Pressure Monitoring System in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, manufacturer of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (without supply connections installation on the tractor unit) * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - The first three pairs are flat (LC 10,000 daN) - The rear pair is fold-out (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank; JOST Modul B, static test load approx. 50,000 kg * Wooden flooring approx. 32 mm thick, framed in aluminum omega profiles on the gooseneck and platform * 10 pairs of recessed, flat-mounted, foldable lashing rings in the outer frame of the load area * One pair of lashing rings (LC 10,000 daN) in front of the last axle and at the end crossmember of the trailer * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the load area for plug-in stakes approx. 100 x 50 mm Iedsy Augdepfx Ad Eotf * 1 spare wheel holder under the load area, right side when facing forward * 1 lockable stainless steel (INOX) toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left when facing forward * Rear crossmember with bevel approx. 350 mm x 10° * Integrated hook-in rail for loose aluminum loading ramps at the rear crossmember * 1 pair of drop-down supports at the rear crossmember * Steering override from front and rear via cable remote control with single-track axle monitoring (no installation on tractor unit) * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 1 LED work light on both left and right of front bulkhead, wired to the tractor unit’s connection rail * Locking positions at each 500 mm on the extension * Internal holder for stakes not in use, mounted to the inside of the gooseneck bulkhead * 4 wheel chocks with holder under the load bed * Galvanised extension sections for platform widening by approx. 230 mm per side (without wooden planks) * 1 LED work light on both left and right in front of the axles, wired to the connection rail for the tractor unit * 2 axle load gauges mounted on the left side, including axle load diagram * 1st axle with traction aid * Mountings for warning signs under the gooseneck as well as left and right at the rear crossmember * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Condition: new, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details ? Loading area length: 13,620 mm ? Loading area width: 2,480 mm ? Fifth wheel height: 980 mm ? Multilock outer frame, universal load securing option every 100 mm _____ Axles/Tires ? BPW axles ? Air suspension ? Wheelbase: 1,310 mm ? Brake discs (370 mm diameter) ? Wheel nuts with protective caps ? 1st axle as lift axle ? Tire monitoring system ? Odometer _____ Attachments ? Toolbox ? 10 pairs of 81 x 81 mm stake pockets in the outer frame ? 15 pairs of Multi-Lash lashing rings ? 10 stake pockets, 81 x 81 mm, centered in the floor ? 12 insert stakes, total length approx. 1,950 mm ? 12 pillars, total length approx. 1,950 mm ? 30 mm thick, waterproof floor panel _____ Accessories ? 2 overhead marker signs including marker light ? Pillar storage on the left side for 12 pillars _____ Lighting ? Multifunctional taillights (Hella) ? 2 LED license plate lights Isdpfxsn Hrtks Ad Eetf ? LED side marker lights with flashing lights ? Rotating beacon (orange) ? Including 1 reversing light _____ Paintwork ? Chassis: RAL 9005 - jet black ? Rims: natural silver ? Landing gear: RAL 9005 - jet black ? Axles: RAL 9005 - jet black ? Bulkhead: RAL 7035 - light gray

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 Isdpfx Adoyz E T Se Eetf * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, 1. Technical Data * Maximum permissible fifth wheel load: 12,000 kg * Maximum permissible axle load: 24,000 kg * Gross vehicle weight rating: 36,000 kg (technically up to 39,000 kg) * Technical details for registration and manufacturer’s plate included. 2. Chassis and Body * Welded ladder-type frame in modular construction * Multi Lock outer frame for flexible load securing * Load compartment length: 13,620 mm, load compartment width: 2,480 mm 3. Protection and Safety * Rear underrun protection and side guard device in compliance with EU directive * Rear access ladder * Two mechanical landing gears, operated from one side 4. Axles and Running Gear * 3 axles, each with a 9,000 kg load capacity Itsdpfx Asyz Et Sod Esf * KRONE axles with air suspension and disc brakes (430 mm diameter) * Lifting and lowering system with automatic lift axle control * 1st axle configured as a lift axle 5. Wheels/Tyres * 6 units, 385/65 R 22.5, M+S tread (Mud & Snow) * Smart Tyre Monitoring and TPMS (telematics services available) * Wheel nuts with protective caps 6. Brakes & Electrical System * Braking system compliant with ECE Regulation 13 including ABS and EBS * Spring-actuated parking brake * Full LED lighting, side marker lights with indicator function, additional sockets 7. Floor & Interior * 30 mm thick, waterproof and sealed hardwood floor * Rear portal through-loading height: 2,700 mm * Steel front wall with impact protection plate 8. Tarp & Side Walls * PVC tarpaulin, sliding cover, reinforced and with tensioning system * Roof tarpaulin white, side and rear contour markings 9. Other Equipment * Toolbox, pallet stop, warning panels, beverage transport certificate * Telematics Premium 24 months included 10. Paintwork & Appearance * Chassis deep black RAL 9005 * Wheel rims in natural silver * Side underrun protection in white 11. Certificates * Load securing certificates according to EN 12642 XL and VDI 2700 Part 12 * EU Certificate of Conformity and Registration Certificate Part II

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2005, loading space length: 13,600 mm, loading space width: 2,500 mm, Equipment: ABS, Schmitz Cargobull S01 Plattform with Lift Axle, SAF Axles Ref. No. for inquiries: 1225957 * ABS * EBS * 3 axles with air suspension * Lift axle * Disc brakes Ijdpfxjyz Enve Ad Ejtf * SAF axles Cargo compartment dimensions: Length: 13,600 mm Width: 2,490 mm Tyres: 1st axle: 455 / 40 R 22.5, 30% tread, air-suspended / lift axle 2nd axle: 455 / 40 R 22.5, 30% tread, air-suspended 3rd axle: 455 / 40 R 22.5, 30% tread, air-suspended ----Price: €2,900 + 19% VAT For further questions, you can reach us at the following numbers: * We speak: German, English, French, Polish, and ????? Subject to errors, mistakes, and prior sale.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2008, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller platform semi-trailer | BPW axles with disc brakes | Year of manufacture: 2008 | Spare wheel holder | Pallet box | Toolbox | Tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Itodpfx Aoxx Nlwed Ejf

Condition: new, maximum load weight: 29,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,480 mm, total height: 2,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Krone Profil Liner SDP 27 3-axle platform trailer * Krone axles * A-axle as lift axle * mechanical support winches (12t) Ijdpfevw Hlcsx Ad Estf * Tires: 385/65 R22.5 * 1x plastic tool box * Pallet box for 24 Euro pallets * Fifth wheel height: 1,150 mm * Spare wheel holder * Reinforced front wall * MULTILOCK outer frame * 6 pairs of heavy-duty lashing eyes * Stake pockets on the side and in the middle * Six extendable stake pockets on each side * Six cable winches on each side for load securing * 18 insert stakes * 4 illuminated over-width signs * ORANGE rotating beacon Example photos We are happy to provide you with further information.

Condition: used, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 11/2026, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 800 mm, total width: 2,550 mm, Year of construction: 2013, Equipment: ABS, 3-axle Kögel SN 24 building materials semi-trailer VIN: 161463 Chassis / Attachments: * Air suspension // lifting and lowering * Jost landing legs * 3 x SAF axles with disc brakes * Tyres: 385/65 R22.5 * Remaining tread depth: F.~30/40% M.~50/80% R.~20/30% * Pallet box Body: * Building materials side wall * Drop sides 800 mm * 8 x stake pockets per side incorporated in the outer frame * 8 x stake pockets, 2 x centrally for insertable stakes * Multilock system Weights: * Gross weight: 35,000 kg * Unladen weight: 5,900 kg * Payload: 29,100 kg Miscellaneous: * German trailer * Main inspection 11/2026 – Safety inspection 05/2026 ---- New main inspections / safety checks or weight downgrades/upgrades available on request. We are happy to assist you in obtaining export/temporary licence plates, and can also arrange transport of your purchased vehicles within Germany. Contact us! ---- We speak German, English, and Russian! ---- No liability for printing or typographical errors, subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Itodeywqb Hopfx Ad Eof Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. Our 11,000 m² premises offer a wide range of vehicles. Our corporate philosophy is characterised by fairness and integrity. Since customer satisfaction is our top priority, we provide an excellent all-round service and a competent contact person who will guide you through the purchase or sale of a vehicle. See for yourself! Our service for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organising special transports We are happy to help you organise special transports. Day plates / Export plates We are happy to assist you in obtaining export/temporary plates.

Condition: used, maximum load weight: 29,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 05/2025, total width: 2,550 mm, Equipment: ABS, You will find our complete stock of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis: * Standard ladder-type frame made of lightweight steel construction with through-bolted cross members * With pre-cambered chassis frame * Cover plate between outer frame and longitudinal member as tire protection for the rear wheels of the tractor unit * Coupling plate approx. 8 mm thick, equipped with a 2-inch kingpin in accordance with DIN 74080 / ISO 337 Running gear: * Axle lift for the 1st axle, without traction assist, fully automatic control dependent on axle load, lift axle can be lowered in any load range via switch * Three-axle SAF-INTRADISC module, with disc brakes Ø 370 mm * Air suspension with approx. 260 mm stroke Vehicle Tires: * 6 x 445/45 R 19.5, 160J tires * 6 steel rims, 19.5 x 14.00, offset approx. 120 mm (ET 120) Chassis attachments: * Landing gear (manufacturer chosen by Kögel), mechanical with compensating foot, 24 t lifting capacity. Single-sided operation on the right in driving direction * Side underrun protection in accordance with ECE-R73 * Spare wheel holder with winch including 1 wheel mounting kit, mounted in front of the axle unit * 2 stowages for 8 square insert stakes each, internal dimensions approx. 340 x 220 x 2,150 mm, installed behind the axle unit * Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, mounted at the rear left in the direction of travel * Fixed rear underrun protection made of steel in accordance with ECE-R58 Brake / air suspension system: * EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket * Air suspension system including one raise/lower valve, mounted behind the axle unit on the left in driving direction. Driving level adjusts automatically * 2 foolproof coupling heads at the front ISO 1728 * Air tanks for the braking system and air supply made of steel (EN 286-2) Floor: * Panel floor approx. 30 mm thick, multiple-glued plywood * Floor sealed all around * 8 rows of pocket rails for square insert stakes approx. 80 x 80 mm, arranged crosswise to the direction of travel (1 row consists of 1 section with 5 stake pockets between the outer frame and longitudinal member, and 1 section with 10 between the longitudinal members). Arrangement as per Kögel standard drawings Front wall: * Front wall approx. 1,800 mm high with aluminum volume corner posts, riveted with aluminum hollow profiles, bolted/riveted to the frame * 2 pairs of lashing rings (permissible lashing force 1,000 kg per ring) on the inside of the front wall per EN 12640 Rear wall: * Folding rear wall approx. 600 mm, made of aluminum hollow profiles with 3 tie rods and T-handle locks, 2 folding steps on the inside * Bolted steel corner posts at rear, up to side wall height Side wall: * 3 pairs of folding stakes to side wall height Itsdpsyvxazjfx Ad Ejf * VarioFix external steel perforated frame * The VarioFix external steel perforated frame cannot be used for lashing due to other attachments * 3 pairs of stake holders for folding stakes on outer frame (evenly distributed) * 24 pairs of lashing rings in the outer frame (to EN 12640), permissible tensile load 4,000 kg per ring (lashing rings are not fully r

Condition: new, maximum load weight: 36,245 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Load area: * Load platform made of hardwood flooring with rear chamfer approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Recesses in the outer frame of the load area for attaching tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air suspension, disc brakes (approx. 377 mm), lifting/lowering function (ET 120) * Axle tools Tires: * Tires 435/50 R 19.5 – make at our discretion * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for correct operation Braking system: * Wabco braking system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grained steels, steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash with the indicators * ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin. Connections as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel structure shot-blasted after welding with automated shot blast system, secondary blasting with corundum for optimal coating adhesion * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final coating with two layers of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with the RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Paint finish tested to ISO 9227-NSS salt spray standard * Cavity sealing with special wax Including the following additional equipment: * Yellow-red air couplings on the galvanized front connection strip * 4 wheel chocks with holders * 2-inch kingpin * Load platform with heavy-duty hardwood floor * 1 spare wheel holder under the platform on the right-hand side in the direction of travel * Galvanized folding supports under the chamfer of the load area * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip sand coating painted onto the central beam * 1 INOX crosswise tool box under the deck, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container sockets in the platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of transverse stake pocket rails mounted in the load area, for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted inside the front wall * 2 INOX toolboxes under the platform, left and right, approx. 600 x 350 x 600 mm Itjdpjyvnfaefx Ad Eof * Holder for aluminum ramps, crosswise under the platform, behind the axles * 1 beacon supplied loose * 2 pairs of ferry rings under t

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied Isdpfx Asyvnd Ned Eotf * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting...

Condition: used, maximum load weight: 44,420 kg, overall weight: 53,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 11,500 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Cargo Area: * Cargo deck with approximately 30 mm thick hardwood floor * 9 pairs of folding lashing rings (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes Landing Legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data. Axles and Suspension: * BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable * Air suspension with raise and lower valve Braking System: * WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical System: * Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically blast-cleaned after welding using a shot-blasting system * Second blast cleaning with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Rims painted silver-grey * Paint system tested by salt spray test to ISO 9227-NSS * Sealant wax applied to cavities Included Accessories: Iedpfxeyu Eu Ie Ad Ejtf * Cargo deck with approx. 30 mm thick hardwood floor * 2” kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * At galvanized front connection bar: DUOMATIC air couplings * Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear * At gooseneck and rear plate, left and right, each with a holder for warning plates including socket * White reflective tape according to EU regulations on sides and red at the rear * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck * European reflective markers (red/yellow) on trailer rear * Bracket for rotating beacon at the rear of trailer * Mudflap at the rear of trailer * Manual and documentation on USB stick * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * 4 wheel chocks with holder at front wall * Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit) * Electro-hydraulic power pack * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes * One INOX toolbox, approx. 1,200 x 460 x 55

Condition: used, maximum load weight: 33,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2018, total width: 2,250 mm, Equipment: ABS, KRONE SD? * Pallet box * ABS * EBS * 3-axle air suspension * Lift axle * Disc brakes * BPW axles Cargo area length: * Length: 13,600 mm * Width: 2,520 mm Tyres: 1st axle: 385 / 55 R 19.5 air suspension / lift axle 2nd axle: 385 / 55 R 19.5 air suspension Iodpfx Aoyvm Rbsd Estf 3rd axle: 385 / 55 R 19.5 air suspension EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 -- EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS PLATES, AND 17 – 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit/guarantee of at least €500 / €1,000 will be levied. Subject to change, errors, and prior sale! More vehicles can be found on our homepage: Sales are made exclusively according to our General Terms and Conditions – see homepage. Important Notice – Important Information: Despite careful review of all details in our offer, errors may still occur. Some of these may result from transmission errors within the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer as defined by §145 BGB. Rather, it provides information for the initiation of a contract. All information stated is provided without guarantee and does not constitute warranted characteristics.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2013, loading space length: 13,400 mm, loading space width: 2,400 mm, Equipment: ABS, Rauw SA 393 Platto Lift Axle | SAF Axles | Timber/Machine Transport Trailer with Wheel Well Ref. No. for inquiries: 0326237 * ABS * EBS * 3 axles, air suspension * Lift axle * SAF axles * Storage box on right & left side / plastic Cargo compartment length: Length: 13,400 mm * Width: 2,490 mm Tyres: 1st axle: 265/70 R 19.5, 30% air suspension / lift axle 2nd axle: 265/70 R 19.5, 30% air suspension 3rd axle: 265/70 R 19.5, 30% air suspension ----Price: €23,900 + 19% VAT For further questions you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Errors, mistakes, and prior sale are reserved. Iedpfx Adeyvct Ds Ejtf

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2013, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Platform Lift Axle Aluminum Side Walls Stakes STEEL TRANSPORTS Internal Reference Number for inquiries: 0326236 * ABS * EBS * 3 axles air-suspended * Lift axle * Disc brakes * BPW axles * Aluminum side walls * Stakes Loading area length: Length: 13,600 mm * Width: 2,520 mm Tires: 1st axle: 385 / 65 R 19.5 20% air-suspended / lift axle 2nd axle: 385 / 65 R 19.5 20% air-suspended 3rd axle: 385 / 65 R 19.5 20% air-suspended ---Price: 9,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Subject to typing errors, errors, and prior sale. Iedpsyulw Nofx Ad Eotf

Condition: used, maximum load weight: 29,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2021, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 1,150 mm, total width: 2,550 mm, total height: 3,278 mm, Equipment: ABS, KRONE SDP 27 Building Materials Semi-Trailer – flawless, well-maintained, available immediately Vehicle Data * Vehicle type: SDP 27 eLSTB3-BS semi-trailer * Chassis number: WKESD00000959326 * Equipment number: F0959326 * Quantity: 2 units available Weights * Permissible total weight: 36,000 kg * Technically permissible total weight: 39,000 kg * Permissible axle load: 24,000 kg * Technical axle load: 27,000 kg * Fifth wheel load: 12,000 kg * Unladen weight: approx. 6,600 kg Dimensions * Loading length: approx. 13,620 mm * Loading width: approx. 2,480 mm * Coupling height (unladen): approx. 1,150 mm Chassis * 3 axles with 9,000 kg capacity each * Air suspension with disc brakes * Lift axle (1st axle), automatically controlled Tyres * 6 tyres 385/65 R22.5 * 1 spare wheel included * Tread: M+S Superstructure * Steel front wall, 2,000 mm high * Aluminium drop sides, 750 mm high, foldable/removable * Rear wall 750 mm high, foldable/removable Itodpfx Adoyq Ufhe Esf * 30 mm waterproof floor (forklift axle load up to 7,000 kg) Features * LED lighting * Toolbox and storage box * Lashing rings and stanchions for load securing * Oversize and warning signs

Condition: used, maximum load weight: 29,340 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2014, next inspection (TÜV): 10/2026, loading space length: 13,600 mm, Year of construction: 2014, Equipment: ABS, * German semi-trailer from first owner, in very good condition * 1st and 3rd axle liftable * Schmitz axles Itodpfsyr A Awjx Ad Esf * Galvanized chassis * Drop sides, lashing rings * Tyres 385/65 approx. 80% * Sliding curtain right/left * WhatsApp: * Contact in Polish, ????? ?????: * Sale only to commercial customers without warranty, all information subject to change, intermediate sale reserved

Condition: new, maximum load weight: 34,815 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Cheese drill SPA Mega extendable HD platform trailer Immediately available TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4285 mm * Platform length 8,950 mm * Extension 6,900 mm Platform extension * Extension locking positions 500 mm Itedpfxol N Syvj Ad Eef * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Gross vehicle weight (80 km/h) 45,000 kg * Gross vehicle weight (60 km/h) 46,000 kg * Unladen weight 10,185 kg CHASSIS: BPW axles with air suspension and disc brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * 1st axle liftable * Wabco brake system * Tires 445/45 R19.5 * 1x spare wheel holder CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm hardwood floor * 8x2 side extensions extendable up to 300 mm * Telescopic support winch front 50t capacity * Mechanically folding rear outriggers 45t capacity RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * Container locks suitable for 1x20 ft , 2x20 ft , 1x40 ft , 1x45 ft , * 1,700 mm steel end wall with Code XL certificate ACCESSORIES: 1x stainless steel toolbox * Stanchion box on bulkhead * 2 x 2 extra-wide boards with LED lighting * Rotating beacon Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: used, maximum load weight: 22,450 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 07/2008, next inspection (TÜV): 11/2025, loading space length: 12,620 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 2,710 mm, Equipment: ABS, The vehicle is on its way. More pictures & technical details will follow shortly. * Stake pockets * 2nd axle steered ----* Tire size: 385/65R22.5 * Permissible total weight: 29,000 kg * Curb weight: 6,550 kg * Overall length: 12,870 mm * Axle distances: 1,900 mm * Safety inspection due: expired Iodpfeyl Rg Rsx Ad Eetf ----Vehicle number: 11807----Subject to errors and prior sale----Advertising and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities related to purchasing a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following at an additional charge:----Trade-in of your old vehicle TÜV/Safety inspection certification Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- Your VTS Team

Condition: used, maximum load weight: 30,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2019, Equipment: ABS, Kögel S24 standard flatbed semi-trailer with plug-in stanchions and stanchion pockets Iedpfxoylfiys Ad Eetf 3 axles, air suspension with one lift axle, SAF axles, disc brakes, ABS. Payload: 30,240 kg Tyres: 385/65R22.5

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 1,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 3-axle semi-trailer in platform design with Fassi F545RA.2.26 crane Chassis Welded construction with cross members, made entirely of high-quality steel Neck construction reinforced for front-mounted crane Axles 3 BPW axles, each with a 9,000 kg load capacity, equipped with disc brakes ABS: 1 axle with sensor Axle spacing: 1,310 mm / 1,420 mm 3rd axle is a trailing steering axle (optionally available with forced steering) Tyres 6 x 385/65 R22.5, mounted on steel rims Lighting system 24V lighting system according to EU regulations 76/756/EEC ff., featuring: 2x2 three-chamber LED rear lights 1x LED reversing light 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standard Floor Phenolic plywood flooring Steel chequer plate above the axle area Load securing Outer frame with D030 mm lashing hole profile in the inclined edge 2x12 lashing points, 8,000 daN on the outer frame 3 rows of combi stake pockets for 80x80 mm plug-in stakes in the lowered bed area Accessories 2x wheel chocks with bracket Spare wheel bracket with winch 2x storage boxes with drawers (for chain storage) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabilizer support 360° working range Isdpfx Adoyihg Ts Ejtf approx. 100% outreach to the front The attached images are sample images. We manufacture crane semi-trailers in a variety of versions. For further information, please do not hesitate to contact us. Upon request, we will be happy to provide a customised quotation based on your required specifications.

Condition: used, maximum load weight: 28,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2006, next inspection (TÜV): 02/2027, loading space length: 13,630 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2006, Equipment: ABS, 3-Axle Schmitz Cargobull SCS 24/L Platform Trailer VIN: 040199 Chassis / Attachments: * Air suspension // Raise and lower function * 3 x SAF axles with disc brakes * Tyres: 445/45 R19.5 * Remaining tread depth: Front approx. 50%, Middle approx. 90%, Rear approx. 40% * 1x PVC box * Pallet box * Widening boards Itedsykfp Dspfx Ad Eof * Hot-dip galvanized Body: * Platform * Stake pockets on both sides * Heavy-duty lashing rings * Length x Width: 13.63m x 2.48m Weights: * Gross weight: 35,000 kg * Unladen weight: 6,950 kg * Payload: 28,050 kg Other features: * German vehicle * Safety and roadworthiness inspection (HU/SP) until 08/26 ---- New roadworthiness and safety inspections or weight downgrades/upgrades are available upon request. We are happy to assist you with export/temporary license plates, as well as with the transport of your purchased vehicles within Germany. Contact us! -- We speak the following languages: German, English, and Russian! -- No liability for printing or typographical errors. Subject to change, prior sale, and errors! Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the supply of new and used commercial vehicles. On 11,000 sqm, you'll find a large selection of vehicles. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an outstanding all-round service package and provide a competent contact person who supports you with the purchase or sale of your vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist with loading your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Temporary / export license plates We are happy to assist you in obtaining export or short-term plates.