Knives mills PC42100R 45kw in stock

3E-GrabTrade PC42100R

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), GT SERIES KNIFE MILLS MACHINES HOUSED IN SOUND-ABSORBING ENCLOSURES, COMPLETE WITH BIG-BAG STATION OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE CURRENTLY AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM MAIN MOTOR 15KW ROTOR EQUIPPED WITH V-SHAPED KNIVES Nlodsudyghepfx Apheg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Nedpfsx D Hntex Aphslg Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Year of construction: 2009, condition: ready for operation (used), Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible. Nlsdey Tx Rnopfx Aphjg

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Knife Granulator PC42100R – 45 kW – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators, and complete recycling systems. We offer a new industrial knife granulator, 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation, and a uniform final fraction. TECHNICAL SPECIFICATIONS: Model: PC42100R Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and processed material. APPLICATIONS: The PC42100R knife granulator is suitable for processing various recyclable materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, Nlsdpfx Apjznbv Hohsg injection molding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. For larger or bulkier materials, we recommend combining the PC42100R with a single-shaft shredder with a hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system, and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders, and complete recycling systems: GrabTrade – shredding and recycling machines.

Condition: used, CNC CONTROL Controller: C-Dias CLAMPING UNIT Clamping force kN: 4.200 Tie-bar clearance (H x V) mm: 820 INJECTION UNIT Injection unit size (Euromap): 2300 Screw diameter mm: 70 Max. shot weight (PS) g: 1.100 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 4 Hot runner control zones: 40 Handling robot (model / year): Wittmann DR 832 (2015) Njdpsz Alptefx Apholg Robot strokes X / Y / Z mm: 900 / 1.600 / 2.500 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 187 + 114

Condition: used, Year of construction: 2001, Clamping force: 420 t Screw diameter: 60 mm Type: Multicomponent Nljdpfx Asz D T Iksphog Drive: Hydraulic