3D printer

3D printer ZBuilder Ultra

Condition: excellent (used), Year of construction: 2013, UV digital printer. Max. glass size: 2100 x 3100 mm. Prints on rigid materials such as glass, plexiglass, PVC, wood, etc. System with 6 print heads. Condition: very good, second-hand Hfsdpfxozvpzgo Ap Ejn

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Hfjdpsy Tav Esfx Ap Eon

Condition: used, Year of construction: 2016, Format: 1250 x 2500 mm Equipment: Number of ink cartridges: 8 Color channels: 8 Number of printheads: 16 Type of input current: Alternating current (AC) Hsdpfxjyx Hu Sj Ap Ejfn Total weight: 1,410 kg

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Hjdpew Inpnjfx Ap Ejfn

Condition: excellent (used), Year of construction: 2014, D.Gen Teleios 180 is an industrial digital textile printer designed for direct roll-to-roll printing on fabrics. The machine is suitable for large-format textile production, advertising textiles, flags, soft signage and other fabric-based applications. Hfsdpsyhna Hofx Ap Eon The printer features a robust industrial design intended for continuous operation in a production environment. With a maximum printing width of approximately 1.8 meters, it supports a wide range of textile materials. The roll-to-roll system ensures stable fabric transport and consistent printing quality. This machine is a suitable solution for companies looking for a reliable digital textile printing system for production or specialized textile projects.

Year of construction: 2022, operating hours: 998 h, condition: used, functionality: fully functional, machine/vehicle number: 031022210023, We offer setup for SLS 3D printing consisting of Sinterit LISA X SLS 3D printing machine, Sinterit Powder Handling Station, Sinterit Sandblaster SLS and cadMIX powder mixer. Details reg. Sinterit LISA X 3D printer : Laser type: IR Fiber Coupled Diode Laser, 30[W]; λ = 976 ± 3 [nm] rated to > 30,000 hrs Max. size of print diagonally: 398 [mm] (15.7 [in]) Max print volume: TPU based / Flexible material: 130x180x340 [mm] (5.1×7.1×13.3 [in]) PA / PP: 130x180x330 [mm] (5.1×6.7×13.3 [in]) Layer height (min – max): 0.075 – 0.175 [mm] (0.003 – 0.006 [in]) Build Speed: up to 18.4 [mm/h] (0.72 [in/h]) Serial number: 031022210023 Manufacturing date: 05/2022 Country of origin: EU, Poland IEC protection class: Class 1 IP code: IP30 Machine type: Selective Laser Sintering 3D Printer Dimensions (W × D × H): 650 × 610 × 1200 mm (25.6 × 24.0 × 47.2 in) Total weight: 145 kg (319.0 lbs) Supply voltage range: 190–240 V AC Supply frequency range: 50–60 Hz Maximum power consumption: 1650 W AC current: 8 A AC voltage for current rating: 230 V AC Number of phases: 1 Short-circuit current rating: 6 kA Total printing time : 998 hrs For more details and technical specifications please see attached .pdf documents. Hfsdpfxsy Snn Hs Ap Eon We are selling complete setup together not separately. Complete setup bought in Slovakia. Examples from printer are available. Box for transport is available. Printer has open system, it is possible to modify the parameters. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Concept Laser Concept Laser M2 cusing Multilaser Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: Hedpfx Aszh Dp Nep Eofn 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 mm (X x Y x Z) Material processed: CL31 / Aluminum-silicon-magnesium alloy (AlSi10Mg) or CL20 / Austenitic stainless steel (316L / 1.4404) Layer thickness: 20-80 μm Production speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage time Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Lifting device Inox 200 Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current draw: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2013, functionality: fully functional, D.Gen Teleios 180 is an industrial digital textile printer designed for direct roll-to-roll printing on fabrics. The machine is suitable for large-format textile production, advertising textiles, flags, soft signage and other fabric-based applications. The printer features a robust industrial design intended for continuous operation in a production environment. With a maximum printing width of approximately 1.8 meters, it supports a wide range of textile materials. The roll-to-roll system ensures stable fabric transport and consistent printing quality. Hodpjyhm Trjfx Ap Eefn Direct to textile printer for flag & banner printing. Fast print speeds of up to 64m²p/h (16-32m2p/h approx. production) 1.8m width Includes in-line heat fixation for increased productivity and reduced footprint. This machine is a suitable solution for companies looking for a reliable digital textile printing system for production or specialized textile projects.

Condition: used, 3D SYSTEMS Type: ProJet 660 Pro 3D printer 3D SYSTEMS 3D printer The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows large models to be produced without prior cutting. Furthermore, the large base area increases productivity when printing many small models in a single printing process. Hfedpfezdyxrsx Ap Ejn 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems," also known as ZPrinters, use a layer-by-layer process based on the ColorJet CJP "Binder Jetting" technology, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unconsolidated powder supports the components during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (automated setup and self-monitoring, automated loading of powder, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special requirements for installation: None Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Stratasys Objet   Model: Objet260 Connex 2   Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825   The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the production of prototypes made of three materials, as well as simulating overmolding or equipping build plates with selected models.   Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces and thin walls.   Model materials:   Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray and VeroBlue) Rubber (Tango family) Hodezh Dqyepfx Ap Eofn Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525)   Digital Materials:   Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance   Applications: Visual prototypes Functional prototypes Tools and fixtures Architectural models Medical models Injection molding molds Concept models   Technical specifications:   Build volume: 255 × 252 × 200 mm   Layer thickness: Horizontal layers of only 16 µm   Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi   Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the complete model size (only for rigid materials, depending on geometry, design parameters and model orientation)   Size and weight: 870 × 735 × 1200 mm; 410 kg   AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.