Used Merlo Tf 42.7 Cs-145 for sale (2)

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,211 h, maximum speed: 40 km/h, Operating hours: 1,211, First registration: 11/10/2022 Basic Equipment / Technical Data - Maximum lifting capacity: 4,200 kg - Maximum lift height: 7,000 mm - Maximum outreach: 3,800 mm - Length to attachment carrier: 4,730 mm - Width: 2,310 mm Nwedpfxetu Szts Aahsb - Height: 2,530 mm / 2,590 mm (when CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement - Water-cooled - Output: 105 kW (143 HP) at 2,300 rpm - Hydraulic reversible cooling fan - Emissions: Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Drive: - Hydrostatic drive pump: electronically controlled with variable output - Engine: variable displacement motor - EPD TOP incl. optional automatic speed increase - Mineral hydraulic oil HVI 46 Transmission: - 2 gears, electrohydraulic control - Max speed = 1st / 2nd gear: 16 / 20 km/h, optional 40 km/h Cab: - Enclosed cab - Split door - 360° all-round visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS-certified - Heater - Front, roof, and rear wipers - Sun blind - 4x1 electronic joystick with capacitive release incl. travel direction switch - CS = hydropneumatic cab suspension Telescopic boom: - 2-section, with electronic end position damping Soft Stop - Attachment carrier quick-change system, type "ZM2", hydraulically controlled from cab Steering: - Hydraulic steering - 3 steering modes: four-wheel, front-wheel, crab steering - Permanent all-wheel drive Axles: - Front axle: rigid - Rear axle: oscillating Brakes: - Power-assisted disc brakes on all four drive shafts, automatically applied parking brake when engine is stopped Frame: - High-strength steel construction Hydraulics: - Load Sensing pump with variable output - Working hydraulics flow: 150 l/min - Hydraulic fan flow: 46 l/min - Total flow: 196 l/min - Working pressure: 250 bar - Flow sharing control block Electrics: - 12 V system - 100 Ah battery - 120 A alternator Stabilisation control: - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition and overload cut-off Tyres: - 460/70 R 24 Michelin XMCL Standard equipment: - Power brakes - Hydraulic oil cooler - Rear plate for attaching a trailer hitch - Hydraulic reversible fan - Radio pre-wiring - Work lights on cab (2 front, 2 rear) - Pre-installed function for additional boom head attachment - 2 hydraulic connections at boom head - Load protection grid at attachment carrier - Road lighting - Automatic battery main switch - Electrical connection cable in boom - Audible reverse signal - Lift cylinder support for safety Optional equipment: - EU road approval as tractor / agricultural tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection, for compact and medium models, height-adjustable version strongly recommended - Air conditioning - Boom Suspension System (BSS) for vibration damping - LED beacon on cab roof (approval required)

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Basic Equipment / Technical Data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to tool carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg - Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversible fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive - Pump: electronically controlled with variable displacement - Motor: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral hydraulic oil HVI 46 - Transmission: 2 gears, electrohydraulically controlled - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap belt - ROPS/FOPS-certified - Heating - Front, roof and rear windshield wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector switch - CS = hydropneumatic cab suspension Telescopic Boom - 2-part telescopic boom with electronic end position damping (Soft Stop) Attachment - Quick coupling system type "ZM2", hydraulically controlled from the cab Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle fixed - Rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels, automatically acting parking brake when the engine is off Chassis - High-strength steel frame design Hydraulic System - Load Sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stabilisation Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition, and overload shutoff Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo-assisted brake Nsdpfx Aaeuycgfjhowb - Hydraulic oil cooler - Rear mounting plate for trailer hitch (AHK) - Hydraulic reversible fan - Radio pre-installation - Work lights on cab (2 front, 2 rear) - Preparation for additional function at boom head - 2 hydraulic connections at boom head - Load protection grate on tool carrier - Lighting for road use - Automatic battery main switch - Electric connection cable in boom - Acoustic warning signal when reversing - Boom support cylinder for securing Optional Equipment - EU approval as tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights at base of first boom section - ASC