Used Ingersoll Compressor for sale (69)

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Giedpsu Ic Ryjfx Afasn 225 Kw Year 2012

Condition: good (used), Year of construction: 2008, Ingersoll Rand screw compressor Gijdeu Idnaepfx Afasn 110 Kw Year 2008

Condition: excellent (used), Year of construction: 2014, INGERSOLL RAND R 75 N Screw Compressor NIRVANA VSD Variable speed (inverter) Gsdpskyuyzefx Afajin Motor 75 kW Capacity 12.88 m³/min Pressure 10 bar Year of manufacture 2014 Compressor in full working order.

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control Giedertrx Ropfx Afaon (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Gsdpfx Aeyi Uaisfaoin Multiprog Powertec technology programming on CD for external programming station

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Gsdsyiz T Nspfx Afajin Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: used, Year of construction: 2009, total height: 2,800 mm, total length: 3,500 mm, total width: 1,800 mm, Empty weight: 13.000 kg Price: On request - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Godpfxoxqw E Aj Afaein - Serial number: 675002 - Drive system: CNC - Horizontal/vertical: Horizontal - Number of axes [pcs]: 3 - X-axis travel [mm]: 650 - Y-axis travel [mm]: 1100 - Z-axis travel [mm]: 500 - C-axis rotation [°]: 360 - Options: Chip conveyor, Tool magazine, Probe - └ Tool magazine [pcs.]: 32 - Transport dimensions: 3500mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: Giodpfoyh A Najx Afajn - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Year of construction: 2008, condition: used, machine/vehicle number: 575415, Weight: 6,700 kg, various peripherals, control unit, 1 handling system OPS INGERSOLL IMC 5, year of manufacture: 2008, serial no.: 583080, weight: 1,800 kg, 1 chiller unit M.T.A. TAE EVO M10, year of manufacture: 2012, 1 fire extinguishing system KRAFT & BAUER FB 703 Gsdpfjyidk Ijx Afasin

Condition: good (used), Year of construction: 2010, operating hours: 103,087 h, functionality: fully functional, INGERSOLL RAND NIRVANA N75 screw compressor Variable speed (inverter) 75 kw motor Gisdpfxeuv Ew Ss Afaen Pressure 10 bar Hours 103087 Built in 2010 Always been maintained Compressor fully operational.

Condition: good (used), Year of construction: 1998, CNC die sinking machine INGERSOLL HANSEN Type: GRANTRY 1000 Year 1998 Gedpfx Afot Dbakeaoin Control MITSIBISHI 64 Bit CNC multipuse Generator 70 Amp Travels : X 700 mm Y1350 mm Z500 mm work bowl : 1000 mm X1600 mm X 550 mm Table load max : 3000 Kg Cooling system , Documentation available Data backup available Accessories Tool holder Hirschmann .

Condition: used, Year of construction: 2011, Sinks (see attached images) Gantry Eagle 500 Year of manufacture: 2011 Travel paths: x/y/z = 525x400x450 Tool changer: 24 positions Weight: 5000 kg Gedpfow D Hcgex Afajin

Condition: good (used), MANUFACTURER: INGERSOLL RAND MODEL: SSR ML37AC S/N: 2260451 YEAR: 1997 POWER (kW): 43 Gedpfeyipu Isx Afajin CAPACITY (m3/min): 5.73 PRESSURE (bar): 7.5

Condition: excellent (used), Year of construction: 2000, operating hours: 9,080 h, MANUFACTURER: Ingersoll Rand MODEL: MH37 GD SERIAL NUMBER: 2272812 YEAR: 2000 POWER (kW): 43 PRESSURE (bar): 10 Gijdpfx Afjyipn Isajn CAPACITY (m3/min):

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: HEIDENHAIN, controller model: iTNC640, spindle speed (max.): 42,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 32, This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information. • Max. acceleration: 15 m/s² • Max. traversing speed: 30 m/min • Control cabinet ambient temperature: up to 33 °C (with heat exchanger) • Traversing paths (X/Y/Z): 550 x 400 x 400 mm • Drive system: Ball screw spindles with directly coupled AC servo motors • Measurement system: Absolute glass scales on all axes Giedpfx Aox D Ektefaon • Torque (S6 60%): 6.7 Nm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,269 h, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640 HSCI, total height: 2,450 mm, table load: 250 kg, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Additional equipment • 4/5-axis Tilting Rotary Table prepared for Pallet System • B-axis Tilting Range: −120° to +60° • C-axis Rotation: 360° • B-axis Speed: 25 rpm • C-axis Speed: 20 rpm • Keller Dust Extraction System • EROWA UPC Production Chuck Clamping System • Tool Length and Diameter Laser Measurement, Broken Tool Detection • Touch Probe (Renishaw) • Precision Pack III – 5-axis Thermal Compensation Machine Benefits Technical Machine Benefits • Spindle-to-table distance (min/max): 50–450 mm Gedpfx Afsyaqf Neaein • Table design: fixed dimensions: 650 × 500 mm • T-slots: 5 × 14h12 • Torque (s1/s6 - 60%): 5. 9 nm / 6. 7 nm • Tool magazine capacity: 32 • Max. Workpiece size: Ø400 × 380 mm Extra Information ECOTEC Energy-saving Function Table Adapter for 4th and 5th Axes HR410 Wireless Remote Control EROWA UPC Basic Chuck with EROWA ITS100 Adapter Dimensions Machine Depth 2800 mm

Condition: used, Year of construction: 1998, Spark erosion machine OPS INGERSOL Gantry 1000 multipulse, No. 571692, year of manufacture 1998, working area 1,200 x 1,000 x 700 mm, with various auxiliary units, cooling unit/pump replaced in 2025. Gijdpfjyhqntox Afajn

Condition: used, MAHO INGERSOLL HANSEN HS 300 E die sinking EDM machine Gijdpfx Afsyghmdjasn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Gedpfxovwa Nbs Afaein The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: used, End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm Giedpfsmydnkex Afaon -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) Gisdpfxex Ryzvo Afajn

Year of construction: 2009, condition: used, Ingersoll Rand TS1100W Air Dryer Manufacturer Ingersoll Rand (manufactured by Parker Hiross S.p.A, Italy) Gsdpfsxggmnjx Afasin Type Refrigeration air dryer – industrial version Industrial applications • Air treatment for compressed air in pneumatic systems • Industrial applications requiring dry air: machining, painting, automation, etc. • Protection of equipment sensitive to humidity Main technical specifications: • Model: TS1100W • Serial number: 3733790002 • Cooling: water-cooled • Refrigerant: R407C • Maximum low-side pressure: 1.9 MPa (275 psi) • Maximum high-side pressure: 2.8 MPa (406 psi) • Circuit pressure: 2.6 MPa (378 psi) • Minimum/maximum air pressure: 4 bar / 14.5 bar • Maximum air temperature: 60°C • Ambient temperature: 5°C to 50°C • Power supply: 400 V – 3 Ph – 50 Hz • Power consumption: 15.6 kW / 27.8 A • Protection level: IP44 • Oil carryover: ≤ 0.01 mg/m³ (with suitable pre-filtration) • Approximate dimensions: 1,450 mm width • Approximate weight: ca. 650 kg • Year of manufacture: February 2009 🧩 Machine usage The Ingersoll Rand TS1100W industrial air dryer is designed to remove moisture from compressed air in production facilities. It protects pneumatic lines, automated equipment, and processes sensitive to humidity, ensuring the reliability and longevity of machinery. ⚙️ Features / Distinctions The TS1100W is distinguished by its water cooling, ideal for industrial environments with high thermal loads. It supports high operating pressures (up to 14.5 bar), and its R407C refrigerant meets modern environmental standards. The robust design allows for heavy-duty, continuous operation.

Condition: excellent (used), Year of construction: 2014, volume flow: 0.24 m³/h, operating pressure: 10 bar, INGERSOLL RAND R 2.2 - 10 screw compressor on a 200 l pressure tank 2.2 kw engine Capacity 0.25 m3/min Pressure 10 bar Year of production: 2014 Mileage 5547 hours THE COMPRESSOR IS FULLY FUNCTIONAL Godpforur N Aex Afaein

Condition: excellent (used), Year of construction: 2002, Screw compressor INGERSOLL RAND MH75 75kw motor Capacity 12.30m3/min Godpfx Ajk N Dtbjfaoin 10 bar pressure Year of manufacture 2002 The compressor is fully operational.

Condition: excellent (used), Year of construction: 2020, INGERSOLL RAND refrigeration dryer Capacity 13 m3/min, year of manufacture 2010 The dehumidifier is fully functional. Gedpfx Afsiuk D Dsajin I HAVE MORE COMPRESSORS FOR SALE SCREW REFRIGERATION DRYERS AND EQUIPMENT WELDING.