Used Gea Decanter for sale (177)

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Ncjdpfx Abeht Hgno Eop

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): Nedpfovhctwex Ab Eocp - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, Year of construction: 2015, Manufacturer: GEA Type: single wall tank Nedpfx Asx R A T Ieb Eocp Year : 2015 Capacity : 290 L Diameter : 61 cm Depth : 108 cm Temperatures: min 0°C – max 90°C Load cells: 4 units -> Sartorius PR6211/22 01 (max 200kg)> Endress+Hauser Liquiphant M vibrating fork level sensor / detector

Condition: used, Quantity available: 14 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Nsdpfxox R A S Rs Ab Eecp Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 25 Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 2 units Manufacturer: GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7111 TM1.P2AAL/81/52 Nominal diameter : DN 25 Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L Ncedpfex R A S Dsx Ab Eop

Condition: used, Quantity available : 2 units Manufacturer: GEA Tuchenhagen Type: Butterfly valve Ncjdex R A Swopfx Ab Eep Model T-smart 7 / 7991 TM15P2AAL/81/52 Nominal diameter: DN 25 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max

Condition: used, Quantities available : 4 units Manufacturer : GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81/52 Ncsdpfxsx R A Sqs Ab Eop Nominal diameter : DN 65 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 80 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Nodsx R A Skepfx Ab Eecp Stainless steel : 316 L

Condition: used, Quantity available: 1 unit Classification: ATEX Manufacturer: GEA Tuchenhagen Model T-smart 7 / 7881 SES.P22EEE/43/65 Nominal diameter : DN 80 Type : Butterfly valve Ncjdpsx R A Sdjfx Ab Eep Set air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 unit Manufacturer: GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL DN : 40 Set air pressure : min 4,8 bar / max 8 bar Ncjdpfx Absx R A R Te Ejp Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 unit Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model: T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 50 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Nedpfxox R A Ryj Ab Eocp Stainless steel : 316 L  

Condition: used, Year of construction: 1999, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Njdpfxox R Amhj Ab Escp Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.

Condition: excellent (used), Year of construction: 2022, GEA 600 mm Pro Edge Drive spiral for sale. This was installed new in 2022 and only used for a few months. 18 tiers, 600mm belt. Nsdpfxsv U T Tbe Ab Eecp

Condition: ready for operation (used), A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible. Ncodpfsu S I D Djx Ab Ejp

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Nsdpfjtpct Njx Ab Eecp

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Ncodpfx Abjydpz Do Eop

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Nsdpfju Av H Dsx Ab Ejcp

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Ncodpfx Abjx Sywas Eop

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register Ncedpfxju Tytae Ab Eop -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm Nedpfx Abju Tlhvo Eocp -Weight: 90 kg/piece

Condition: excellent (used), GEA MegaSlicer for cooked meats. In lovely condition. With outfeed conveyor not shown in photos. Nsdpfxjx Ni H Ej Ab Eocp

Condition: not inspected (used), Well maintained 7m x 1000mm thermal oil fryer, direct from closed poultry factory where it was frying chicken burgers and nuggets. Complete with top hold down belt. The hoists to lift the canopy have been lost by the storage company so these will need to be remanufactured. Machine was in lovely condition prior to being removed from the factory when it closed in 2016. Nedpfx Aoht T Ilob Escp

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Ncsdjmmdq Topfx Ab Ejp Weight: 400 kg Height: 205 cm Width: 130 cm Depth: 65 cm

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm Ncodek Sgwaopfx Ab Eep frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: excellent (used), 600mm batter enrober. Can be supplied as part of complete coating line. Ncjdpfx Abex Hbfuj Esp