Dirk Prokop Engineering

Condition: excellent (used), Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm -Volume flow rate: m³/min Hnodpfxezdzq Ne Adron -Inlet: Ø 215 mm -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm -Dimensions: 1790/650/H880 mm -Weight: 119 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Volume flow rate: m³/min Hnsdpfezdq R Esx Adrjn -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm Hnsdpfxezdq Rls Adren -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg

Condition: new, Batch of various hydraulic components: Hydraulic pump SKP2-022RE10T80-C7C3P10 Orbit motor SMSS-160-D Hydraulic motor, left-hand rotation, 6 cc Hydraulic double pump Double-acting hydraulic cylinder 20/40 mm, stroke 350 mm Double-acting hydraulic cylinder 20/30 mm, stroke 950 mm Various hydraulic connections and flange components: C2S.40.28.300 Front flange M24x C2S.40.28.150 Bottom/bore Hjdpfx Adszdqz Rorsnn C2S.30.20.125 G1040Z M10x1.5

Condition: new, Set of 2 MATS FOR CHIP REMOVAL AT THE OUTLET OF A BIESSE MACHINING CENTER: Hnsdjzc Rc Hspfx Adrsn - 1 Flat mat, 600 x 2100 mm, - 1 Inclined mat, 700 mm, with a retaining edge to contain chips up to a height of 1650 mm.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan, fume extractor -Manufacturer: Exhausto Exodraft, smoke extractor Hsdpfozcvw Njx Adrenn Type: RS -Motor: 0.03 kW 1350 rpm -Inlet connection: Ø 280 mm -Dimensions: 360/360/H290 mm -Weight: 11.7 kg

Condition: used, Used drive module from Bosch Rexroth. The item has not been tested for functionality. Hjdpozcgz Sofx Adrenn Manufacturer: Bosch Rexroth Product series: IndraDrive Type: HMD01.1N-W0036 Device type: Drive module

Condition: new, NORD Drivesystems SK agitator drive with stainless steel agitator New, unused agitator drive from stock. Complete, consisting of a NORD geared motor, flange mounting, and stainless steel agitator for tank and process applications. Hjdpfx Adozb Nvverjnn Manufacturer: NORD Drivesystems Motor type: SK 90L/4 Gearbox type: SK 9012.1AFBH VL2-90L/4 Design: Agitator drive with geared motor Condition: NOS (New Old Stock) Motor power 50 Hz: 1.50 kW Motor power 60 Hz: 1.73 kW Motor speed 50 Hz: 1395 min⁻¹ Motor speed 60 Hz: 1675 min⁻¹ Operating mode: S1 Protection class: IP55 Insulation class: F Voltage 50 Hz: 230/400 V Δ/Y Voltage 60 Hz: 265/460 V Δ/Y Rated current 50 Hz: 6.15/3.55 A Rated current 60 Hz: 6.15/3.55 A Power factor cos φ: 0.78 Efficiency IE1 at 50 Hz: 77.5 % Efficiency IE1 at 60 Hz: 80.4 % Gearbox ratio: 8.09 : 1 Output speed: 172 min⁻¹ Mounting position: IM4 Agitator shaft: Stainless steel Agitator impeller: Stainless steel, 2-blade Flange connection: present

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm Hsdpfx Adezbrltoronn -Inner diameter: 300 mm -Width: 120 mm -Quantity: 2x inner ring available Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece Hsdpfxjzbrkcs Adrjnn -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally elastic coupling Hedpfozbq Sxsx Adrjnn -Manufacturer: Desch, Hadeflex torsionally flexible jaw coupling -Type: FW9 -Hole shaft: Ø 32 mm -Dimensions: Ø 250 x 220 mm -Weight: 36.3 kg

Condition: good (used), Threaded spindle, threaded rod, threaded bolt, threaded rod, spindle, trapezoidal threaded spindle -Threaded spindle: Trapezoidal threaded spindle -Thread: Diameter 70 mm Hnsdpjza Tgvefx Adron -Gradient: mm -Thread length: 650 mm -Dimensions: see photos -Dimensions: Ø 70 x 650 mm -Weight: 16.5 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total width: 600 mm, total height: 750 mm, total length: 2,000 mm, conveying length: 2,000 mm, construction width: 500 mm, construction height: 750 mm, overall weight: 65 kg, Manufacturer: TAF Year of manufacture: 2025 Overall dimensions (LxWxH) in mm: 2,000 x 600 x 750 Width including side panel in mm: 600 Overall height in mm: 750 Conveyor length in mm: 2,000 Hnjdpfx Aoza Dgyodrsn Conveyor width in mm: 600 Base structure: Supports, castors (2 pieces) Base plate, material: steel segments 600 x 500 Roller spacing in mm: 100 Ball roller material: steel Ball roller diameter in mm: 15 Drive: none Net weight: 65 Condition: used / fully functional Functional test: OK

Condition: like new (used), Year of construction: 2006, operating hours: 9,600 h, functionality: fully functional, rotational speed (max.): 12,000 rpm, Sale of a steam turbine from a biomass power plant For sale is a steam turbine that has previously been used in a biomass power plant. The unit is in very good technical condition and is ideally suited for further use in energy or industrial projects. The offer includes: Professional dismantling of the turbine Transport to the new location Hnedpfx Adozakb Derjn The turbine is intended for use in a short-term project only and is therefore available at attractive conditions. Further technical data and information are available upon request.

Year of construction: 2023, condition: ready for operation (used), Three identical transport vehicles available, year of manufacture: 2x 2021, 1x 2023. An on-site inspection is possible. Hjdpfjzadlvex Adronn

Condition: ready for operation (used), Lift for one floor. Hnodpjy U Na Nefx Adron

Condition: defective spare-parts repository (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 11.0591/4, empty load weight: 1,600 kg, load capacity: 6,000 kg, table width: 2,000 mm, input voltage: 400 V, type of input current: three-phase, table length: 3,000 mm, TEVAG 20/30/6 Truck Loading Bridge – Defective / Uninspected Selling a used hydraulic truck loading bridge, TEVAG type 20/30/6. The loading bridge is explicitly sold as defective or uninspected. Sale is exclusively as a DIY project, for spare parts, or for repair. The system was taken out of service for safety reasons. No guarantee on function or operational safety. Technical Data Manufacturer: TEVAG Type: 20/30/6 Machine Type: hydraulic truck loading bridge / loading ramp Load capacity: approx. 6 t Platform width: approx. 2,000 mm Platform length: approx. 3,000 mm Hydraulic lifting mechanism Hnsdpoy Urc Tsfx Adrjn High-voltage connection Suitable for ramp and loading operations Condition Used Explicitly sold as defective Uninspected condition Ideal as a source of spare parts or for repair No warranty No returns Inspection is highly recommended Dismantling and transport by the buyer Note Year of manufacture, exact design and accessories as per the nameplate or photos. Sale is made with the exclusion of any liability for defects.

Condition: good (used), automatic film wrapping machine with infeed and strapping with tape around the wrapped product, with a transport system and wooden support under the package. Hnjdpfx Aoy Uagmodron

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan Hjdjy Tt Twopfx Adronn -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Aertenica Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: 1.5 kW 1360 rpm -Fan wheel: Ø 225 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 200 mm -Dimensions: 520/490/H400 mm Hedpfx Adsy Tt Sgjrenn -Weight: 25 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan Hnedpfx Aoy Tt Ihedrjn -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm -Fan wheel: 2x Ø 200 x 80 mm -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm -Dimensions: 815/590/H400 mm -Weight: 33 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 162236, Shredding machine from the manufacturer Wagner, product type WS 22. Hnodpfx Aoy Tltisdrjn Technical specifications are attached.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Hnodjy Tiz Dopfx Adron

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Hnsdpfoy Tizdex Adren Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: new, Brand new electric actuator from the renowned German manufacturer AUMA. Professional device designed for industrial automation, suitable for the operation of valves, gates, dampers, and other industrial fittings. The actuator is in stock condition – unused. Robust industrial design with a manual emergency handwheel and high ingress protection class IP68. Technical data: Manufacturer: AUMA Riester GmbH & Co. KG Model: SAR 07.6-F07 Order number: 13384379 Serial number: 1417MD37537 Output speed: 22 rpm Closing torque (T zu): 30–60 Nm Opening torque (T auf): 30–60 Nm Protection rating: IP68 Operating temperature range: -30°C to +70°C Lubrication: F15 Motor data: Motor type: VE0R048-2-0.120 Power: 0.12 kW Supply: 1~ 220-240V Frequency: 50 Hz Current: 1.8 A Capacitor: 25 µF Cos φ: 0.97 Motor speed: 2800 rpm Duty cycle: S4-25% ED 1500 c/h Insulation class: F Thermal protection Protection rating: IP68 Applications: - Industrial automation Hsdpfoy Su Ersx Adrjnn - Valves and dampers - Water and process installations - Power generation - Chemical industry - Industrial fittings control systems