Vm Macchine Srl

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1073098273, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Dwsdsxvp Iyopfx Ac Hed The payment deadline for the machine is December 4, 2025! By placing a bid, you commit to collecting the machine on time between December 10, 2025 and December 12, 2025! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Feed rate XYZ: 3,000 rpm Rapid traverse: max. 22 m/min Max. recommended working feed rate: 15 m/min Spindle speed: 100 – 18,000 rpm Tool holder: HSK-63 A Tool change time: approx. 5 s Chip-to-chip time: approx. 7 s Tool diameter: Ø 90 mm fully loaded / Ø 110 mm partially loaded Tool length: 250 mm without taper Tool weight: max. 6 kg Table surface: 850 x 530 mm T-slots: 6 x 14 H12, alignment slot 14 H7 in the center of the table Slot spacing: 63 mm Table load capacity: max. 400 kg MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Connection: 40 kW Nominal current: 80 A Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,300 x 2,800 mm Weight: 6,800 kg EQUIPMENT 30-position tool changer

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,975 h, General Data Measurements width 1910 mm Measurements depth 3195 mm Measurements height 2720 mm Machine weight 4350 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Tool taper HSK-A63 (standard: ISO40) Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 450 mm Additional Equipment T-slots: 16 × 100 mm (4 pieces) Speed: Standard: 12000 rpm /Optional: 18000 rpm or 24000 rpm Motor power: Heidenhain: 10/12.5 kW /Siemens: 10.5/15.8 kW /Fanuc: 11/15 kW/ Optional: 20 kW Axial Accuracy Control (AAC) / Spindle Vibration Supervision (SVS) / Tool-tip Positioning Control (TPC) Standard: 30 or 32 tools/ Optional: 40 tools Tool holder: BT / CAT / DIN 40 / HSK 63 /Change time (tool-to-tool): 1.55 s (50 Hz) / 1.31 s (60 Hz) Max. Tool dimensions: Diameter: Ø75 mm (Ø125 mm with empty neighboring compartment) / Length: 300 mm /Weight: 7 kg Tool changer (ATC) Type: Arm change ISO40 in-line spindle (12000 rpm, with CTS function) / Spindle oil cooler / Arm tool changer (30/32 tools) Djdpfx Acexvfh Aj Hewd Coolant tank (20 bar) / Scraper chip conveyor / Linear encoder for all 3 axes / Backwash device / Flushing gun / Heat exchanger / 4th axis prepared (switching circuit) This 3-axis AXILE V4 vertical machining center was manufactured in 2019. It features a robust table size of 770 × 410 mm with a maximum load capacity of 400 kg. Equipped with a high-speed ISO40 spindle capable of 12,000 rpm, it ensures efficient machining. The machine includes a 30/32 tool arm changer and a rapid traverse rate of 36 m/min, enhancing productivity. Consider the opportunity to buy this AXILE V4 vertical machining center. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2023, operating hours: 426 h, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 28 m/min, rapid traverse Y-axis: 28 m/min, rapid traverse Z-axis: 28 m/min, overall weight: 3,170 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, The sale is taking place due to insolvency, and additional photos will follow soon. CNC machining center, used, only 139 spindle hours Manufacturer: HURCO Model: VMX 10i plus Year of manufacture: 2023 Operating hours (as of 24.10.2025): Spindle hours: 139 h Power-on hours: 426 h Control: MAX 5 control system, dual display X-axis: 660 mm Y-axis: 406 mm Z-axis: 508 mm Spindle nose to table: 102–610 mm Table: 762 x 406 mm Maximum table load: 1,500 kg Spindle Mount: SK 40 Speed: 12,000 rpm Spindle power: 11 kW Spindle torque: 61 Nm Rapid traverse: 28/28/28 m/min Tool changer: 24 stations Equipment: - Spindle chiller - Chip conveyor / left auger - Coolant ring - Electronic handwheel Software options: - Pocket milling with islands - Helix - Tool and material database Dwedpjxvd Tkofx Ac Hed - Tool change optimization The machine can still be inspected under power.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Control: FANUC 16 Ois-MB X-axis: 600 mm Y-axis: 410 mm Z-axis: 460 mm C-axis: 360° A-axis: -120°/+30° Dwodpfxjxvc Adj Ac Hod Diameter of clamping table: 350 mm Max. speed: 12,000 rpm The machine is equipped with: NIKKEN 5AX-350 FA rotary and swivel table FANUC 16Ois-MB 5-axis simultaneous machining Electronic handwheel Includes approx. 180 tool holders

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 2200 mm Measurements depth 2100 mm Dedpfx Acjxu Rxwo Howd Measurements height 2600 mm Machine weight 3400 kg Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 660 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 406 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 508 mm Z-Axis Rapid Traverse 36 m/min Table Tslots size 14 mm Number of tslots 3 Table load 500 kg Tools Number of index 20 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VM10i was manufactured in 2016. It features a robust table size of 760 × 406 mm, capable of handling a maximum load of 500 kg. The spindle can reach speeds up to 10,000 rpm, supported by a 7.5 kW motor. It includes an automatic tool changer with a capacity of 20 tools. Ideal for precision machining with rapid traverse rates of 36 m/min. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 1600 mm Measurements depth 2360 mm Measurements height 2460 mm Machine weight 2700 kg Main Drive Spindle speed range 8000 Tool taper ISO 40 Number of axis 3 Dwodpsxu Rvcofx Ac Hsd Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Table load 200 kg This 3-axis KIRA VTC-40S was manufactured in 1997. It features a FANUC 21M CNC control, with a table size of 700x400 mm and a maximum table load of 200 kg. The spindle can reach up to 8000 rpm, and it includes a star-type tool magazine with 10 positions. X, Y, and Z travels are 600 mm, 400 mm, and 400 mm respectively. Consider the opportunity to buy this KIRA VTC-40S vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 400 mm z-travel 510 mm table-size 800 x 400 mm Control HEIDENHAIN iTNC 530 spindle turning speed - stepless 12.000 U/min feed speeds - directly programable 30.000 mm/min tool taper ISO40 tool magazin: 20 total power requirement 25 kW weight of the machine ca. 4,2 t Dwodpfxjxu Nxce Ac Hsd dimensions of the machine ca. LTH 3,5 x 2,1 x 2,95 m Control unit operating time: 32,790 hours. Spindle operating time: 10,310 hours. Includes Heidenhain electric handwheel. Includes electric touch probe. Includes internal coolant supply. Includes chip conveyor. Includes Gressel Gripos machine vise. Includes USB port.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Dwjdexu Ictspfx Ac Hod Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Display Heidenhain TNC 114 and Infinitely Variable Feed Technical Data: Dedpsxu Hkcofx Ac Hewd >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40, extendable >> Weight: approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control system TNC 114, which means it can travel a programmed distance in any one axis (X, Y, or Z) and stop automatically upon reaching the set value. Up to 4 different zero points can be set, and dimensions can be entered as either absolute values or incremental (chain) dimensions. The feed is infinitely variable from 0 to 750 mm and can be adjusted during machining. Rapid traverse can be activated at the push of a button. Spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only when the machine is at standstill. The vertical milling head is mounted with three bolts, allowing for removal or reattachment in just 2 minutes; it is manually fixed using the articulated arm on the left of the machine and simply swung aside. A particular feature of this machine is its large travel distances relative to its size: Z = 380 mm, X = 500 mm, and Y = 500 mm. Additionally, the machine has electronic overload protection for the vertical spindle. Mechanically and electrically tested. You are welcome to view and test the machine under power at our facility.

Condition: good (used), Year of construction: 2010, AWEA 1250, 15.000 rpm Dwedpfx Acexu Ew Uj Hjd coolant thru spindle, Tool changer 40 places Parts shown by hand not come. Machine vices, plate on table not come with machine.

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3500 mm Measurements depth 3000 mm Measurements height 2500 mm Main Drive Spindle speed range 18000 Tool taper HSK-63A Number of axis 4 Movement X-Axis Movement 630 mm X-Axis Rapid Traverse 26,000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 26,000 mm/min Z-Axis Movement 560 mm Z-Axis Rapid Traverse 20,000 mm/min Table Table load 400 kg Tools Dwodpfx Ajxuw D Hec Hod Number of index 20 This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. Application Types Milling

Condition: good (used), Year of construction: 2002, DECKEL MAHO Milling Machine DMC 63 V Dodpjxuwm Iofx Ac Howd Good condition, fully operational, can be inspected and tested under power on site. Shipping available internationally. Inspection: In principle, I would like to point out that to avoid misunderstandings, the item can be inspected and tested under power before purchase. Please ask any questions prior to purchasing to avoid ambiguities. For general inquiries or to arrange an inspection appointment, I can be reached at the phone number listed above or below at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping via freight carrier.

Condition: good (used), Year of construction: 2014, operating hours: 23,816 h, functionality: fully functional, Travel paths (XYZ): 850x560x510 mm, max. spindle speed: 12,000 rpm, 60-position tool changer SK40, control: SIEMENS 840D, 1 chip conveyor, internal coolant supply. Dodpfx Acexuqlke Howd NOTE: We offer flexible financing solutions for all machines, as well as a professional relocation service. Disassembly, transport, and expert installation – all from a single source. Billing according to individual terms and duration. Contact us for your personal offer.

Condition: good (used), Year of construction: 2012, operating hours: 52,789 h, functionality: fully functional, Travelling Column Milling Machine DMF 360 (Yll00) New DMG Design Travel paths: X = 3,600 mm, Y = 1,100 mm, Z = 900 mm Rapid traverse: 40 m/min, acceleration: 4 m/s² Dodexuqk Tspfx Ac Hswd Spindle speed range: 20 to 8,000 rpm Vertical motor spindle with 23.5 / 13.5 kW (25 / 100% duty cycle) Tool holder: SK40 according to DIN 69871 Tool clamping according to DIN 69872 Magazine for 30 tools (chain-type with double gripper) Chip-to-chip time: 9 s (SK40) Fixed table: 4,200 x 1,100 mm Full enclosure, coolant tank Direct measuring systems Dynamic package for DMF 360 linear (Yll00): Linear drive X-axis with 80 m/min Rapid traverse XYZ: 80 / 60 / 60 m/min, acceleration XYZ: 5 / 6 / 6 m/s² Active cooling for main spindle and linear motor Chip-to-chip time: 7.5 s (SK40) Fixed table with integrated rotary table, Ø 1,050 mm, left-side arrangement Max. load capacity: 1,200 kg Hydraulic clamping Swivel head, B-axis, 20 – 10,000 rpm, HSK-A100 for tool holder according to DIN 69893 with power 32 / 22 kW (40/100% duty cycle) with torque 298/205 Nm (40/100% duty cycle) Infrared probe Make: Heidenhain TS 649 DMG Laser tool measurement: Blum (not compatible with TT140; for pendulum machining, please order 2 units as needed) Calibration arbor with tool holder Production package includes: - Chip conveyor - Internal coolant supply 40 bar / 980 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rinsing gun - Rotary union for spindle Packaging floor/foil Tool magazine with 60 / 120 positions SK50 / HSK-A100 The complete list of features is available in the uploaded PDF file. NOTE: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and professional assembly – everything from a single source. Billing according to individual terms and duration. Contact us for your personal offer.

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model TC 530 Main Drive Dwedsxulcqepfx Ac Hed Spindle motor power 15 kw Spindle bore 18000 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm C-Axis Movement 360º table rotation Media Chip conveyor Yes This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available. Application Types Milling

Condition: like new (used), Year of construction: 2015, operating hours: 26,156 h, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens 840D, workpiece length (max.): 850 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 500 kg, total height: 3,100 mm, total length: 4,150 mm, rotational speed (min.): 1,200 rpm, spindle speed (min.): 12,000 rpm, Year of manufacture: 2012 Dwsdpfoxuiibjx Ac Hed CNC Control: Siemens 840D Axes X-axis travel (mm): 600 Y-axis travel (mm): 700 Z-axis travel (mm): 600 C-axis indexing (degrees): 360° (0.001) B-axis indexing (degrees): -30°/180° (0.001) Feed rates (m/min): 60 Rapid traverse (m/min): 60 Axis acceleration (m/s²): 6/6/5 NC Milling/Turning Table: Number of pallets: 2 Pallet dimensions (mm): Ø630 Max. workpiece size (D x H) mm: Ø630x850 Max. workpiece weight (kg): 500 Table rotation speed (rpm): 1200 Spindle Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 35/24 (40% duty cycle / continuous) Spindle torque (Nm): 111/77 Cooling Coolant supply through spindle (bar): 40 Tank capacity (liters): 980 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 60 Tool changer type: Double gripper With free adjacent positions (mm): 120 With occupied adjacent positions (mm): 80 Max. tool length (mm): 450 Max. tool weight (kg): 15 Chip-to-chip time (sec.): 4 Equipment Electronic handwheel Chip conveyor Infrared probe Rotating viewing windows Rinsing gun Operating mode 4 Compressed air through spindle selectable via M-function NC rotary swivel table 3D quickSET MPC – Machine Protection Control Machine running hours: Power-on hours: 26,156 Spindle working hours: 16,472 Base machine: Dimensions/Weight Length (mm): 4,150 Height (mm): 3,100 Weight (kg): 10,000

Condition: used, Year of construction: 2015, Serial no. 72.83.015, control system by Heidenhain, type ITNC530, 5 axes, travel range X/Y/Z 1,350 x 1,170 x 700 mm, swiveling spindle, CNC rotary table, electrospindle by Steptec, maximum speed 24,000 rpm, 3-way pallet changer, pallet size 1,000 x 850 mm, 238-position tool magazine, 5 levels, HSK 63 tool holder, belt filter by BMF, ICS (internal coolant supply), cabin, infrared probe by Renishaw, tool and accessory package: tool container, 4 drawers, single-door, 2 table trolleys, telescopic drawer cabinet with 11 drawers, contents: HSK 63 tool holders, FCS Breil zero-point clamping system, 3 grid plates, 25 mm hole pattern, setup tools, accessories. Dsdpexug Diefx Ac Howd

Condition: used, Year of construction: 2007, Serial no. 107.51.00.013, control unit by Heidenhain, type ITNC530, 5 axes, rotary/swivel table, travel X/Y/Z 1,000 x 700 x 700 mm, electrospindle by Step Tec, max. speed 24,000 rpm, 5-position pallet station, pallet size 500 x 600 mm, 165-tool changer, HSK 63 tool holder, swarf conveyor, belt filter, internal coolant supply, coolant temperature control, enclosure, BLUM laser measuring system, tool and accessory package, mobile workbench with 6 drawers, single-door, tool trolley, orange, 2 table carts, contents: tool holders, clamping devices, FCS zero-point clamping system, 5 grid plates, HD vise. Dwedpexug Aljfx Ac Hsd

Condition: ready for operation (used), Year of construction: 2001, operating hours: 5,000 h, General Data Measurements width 2020 mm Dedpfoxuaxgsx Ac Hjwd Measurements depth 2500 mm Measurements height 2750 mm Machine weight 6700 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of axis 3 Movement X-Axis Movement 600 mm X-Axis Feed Force 6000 N X-Axis Rapid Traverse 35 m/min Y-Axis Movement 450 mm Y-Axis Feed Force 6000 N Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 450 mm Z-Axis Feed Force 6000 N Z-Axis Rapid Traverse 35 m/min Table Table load 500 kg This 3-axis HERMLE C600V vertical machining centre was manufactured in 2001. It features a Siemens Sinumerik 840D control, a rapid traverse of 35m/min, and a coolant system with a 200-liter tank. With a table size of 800 mm x 465 mm and a maximum load of 500 kg, it's ideal for diverse milling tasks. If you are looking to get high-quality milling capabilities consider the HERMLE C600V machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, spindle speed (min.): 10,000 rpm, Technical data: Travel X-axis: 635 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Manufacturer: Deckel Maho Year of manufacture: 2012 Control: SIEMENS 810D with ShopMill Type of control: CNC Power-on hours: 20,135 h Spindle hours: 7,673 h Total power requirement: 13 kW Condition: As new Description We are selling a 3-axis machining center DMG DMC 635 V ecoline in excellent condition. The machine has been fully measured and stands out due to its extensive equipment. The machine is from 2012 but has only 7,012 spindle hours. The machine has seen very little use and its geometry is close to that of a new machine. Dsdpfx Aoxt N N Eoc Hswd Machine features: - Tool measurement (hardware and software) - Workpiece measurement (hardware and software) - Chip conveyor - 30-position tool changer - Through spindle coolant (20 bar) - Spindle 10,000 rpm - Tool holders - SIEMENS 810D control with ShopMill

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Djdpfxextxk Sj Ac Hswd Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. You can find further milling machines from well-known manufacturers on our website.

Condition: used, Experience maximum precision and efficiency with the MAHO 600 S machining center, equipped with a powerful automatic tool changer. This CNC-controlled milling center impresses with a maximum spindle speed of 2501 to 3000 rpm, enabling highly dynamic and flexible processing of your workpieces. With overall dimensions of 250 cm in width and height and 300 cm in length, this premium machine integrates seamlessly into your workshop. Manufactured in Germany, the MAHO 600 S machining center is designed for operation with voltages up to 440 V and stands out for its robust construction and durability. The intuitive CNC control system allows for precise and automated processing of your materials, saving both time and labor. Ideal for a wide range of machining tasks – with the Dwsdpjxtqrnefx Ac Hjd

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG Deckel Maho Machining Centre 5-Axis Simultaneous Model DMU 50 EVO Linear Year 2007 Complete machine Dwsdjxtqfnopfx Ac Hsd With documentation

Condition: used, Year of construction: 2021, operating hours: 7,369 h, functionality: fully functional, Equipment: chip conveyor, The machine is in daily operation and can be viewed at any time. The reason for selling the machine is that we need a larger machine for milling heavy parts. Dwedpfxoxtnh He Ac Hod

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 610 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 520 mm, table width: 363 mm, table length: 762 mm, table load: 350 kg, Box Flat guide way contsruction Very little used ATC Drum 24 Positions X - Travel: 610mm Y - Travel: 455mm Z - Travel: 520mm Dwsdpfx Ajxtbutjc Hed Table Length: 762mm Table Width: 363mm Table load: 350 Feed rate X-Axis: 24000mm/min. Feed rate Y-Axis: 24000mm/min. Feed rate Z-Axis: 24000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Number of controlled axis:3 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 2300mm Height: 2600mm Weight: 3140kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!