Metalis Energy

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 680 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37,000 W, number of slots in tool magazine: 80, tool weight: 25,000 g, number of axes: 4, These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The second machine features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details. • Package: 2 horizontal machining centers + shared pallet storage system • STARRAG HECKERT HEC 500 H/V (2008) • Control: Siemens SINUMERIK 840D Powerline • Head: Swivelling H/V head (Horizontal/Vertical) • Pallet size: 500 x 500 mm • Travels: X 800 mm / Y 800 mm (vertical position) / Z 680 mm • Rapid traverse: 60 m/min • Spindle power: 37 kW • STARRAG HECKERT HEC 500 H (2009) • Control: Siemens SINUMERIK 840D Powerline • Pallet size: 500 x 500 mm (DIN 55201) • Travels: X 800 mm / Y 650 mm / Z 680 mm • Rapid traverse: 60 m/min • Spindle torque: 82 Nm • Max. tool weight: 25 kg • Max. tool diameter: 80 mm (160 mm with free adjacent places) • NC rotary table (B-axis): 360,000 x 0.001° • Note: Tool breakage detection system is out of service Additional equipment • Fastems FPC 1500 Linear Pallet Pool (shared by both machines) • Automation: Both machines connected to the Fastems FPC 1500 LPP • For HEC 500 H (2009): • Coolant system with paper band filter • Internal coolant supply, 50 bar • Chip conveyor Bedpfx Abjy I Ucvebjwl Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Bodpfx Abey Iwdpobjwl Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Technical Specification Taper Size SK 50 Bodpfxoy H D T Uo Abbowl

Condition: used, Year of construction: 2023, operating hours: 9,950 h, functionality: fully functional, Year of manufacture: 2023, the machine is in almost new condition. The machine is connected and ready for any kind of inspection or test. Bjdpey H D S Rsfx Abbowl

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm Bwsdpsy Hmhzofx Abbol - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Bodpfjy Epfvsx Abbswl Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2005. It features an XYZ travel of 800 x 800 x 800 mm and a pallet size of 630 x 630 mm. The machine is equipped with a 100-tool automatic tool changer and a 6-pallet pool for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 630 x 630 • Tool magazine: 100 ATC • 4th axis: 360° Additional equipment Bwedsy Egbrspfx Abbjl • 6x pallet pool • Probe Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. Bwodpfey Ef D Eox Abbol • Automatic tool changer (ATC): 52 tools Additional equipment • Twin pallet changer Technical Specification Taper Size SK 50

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing Bwjdpoy Ed Icefx Abbel The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, table load: 500 kg, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 750 mm Distance spindle nose to table surface: 50 - 750 mm Distance spindle nose to table center: 150 - 900 mm Pallet dimensions: 500 mm x 500 mm Table load capacity: 500 kg Pallet area: 24 M16 x D 2.0 Table indexing increment: 1° Spindle speed: 14,000 rpm Spindle taper: ISO 40 Max. spindle torque (25% duty cycle): 220.5 Nm Rapid traverse (X, Y, Z): 60 m/min Working feedrate: 30,000 mm/min Tool holder type: MAS403 BT40 Magazine capacity: 120 tools Max. tool length: 400 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1 sec Tool change time (chip-to-chip): 3.5 sec Number of pallets: 7 Type: Rotary shuttle Pallet change time: 7.5 sec Pallet rotation in loading station: 90° Bwodpfx Abjy Edarebel MACHINE DETAILS Operating hours: 34,959 h Spindle motor (30 min): 18.5 / 22 kW Axis motors (X, Y, Z, B): 7.0/7.0/7.0/2.7 kW Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,700 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT Through-spindle high-pressure coolant, 35 bar Chip extraction system Operating manuals CE Declaration

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control: Siemens SL Tool positions: 160 Tool holder: HSK 63 Bedpfoy Ap Eusx Abbowl Spindle speed: 10,000 min⁻¹ / 242N Pallet size: 630×500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Max. table load: 1000 kg

Condition: new, Year of construction: 2024, functionality: fully functional, HORIZONTAL MACHINING CENTER MODEL AVEREX HS 450 K 1. Controller: AVEREX-FANUC Mpro I Plus (FANUC Oi-MF PLUS) 2. APC: 2-pallet system 3. Maximum spindle speed: 15,000 rpm 4. Spindle taper: BBT 40 BIG-PLUS 5. Maximum spindle motor power: 37kW, 249Nm 6. 100% hand-scraped contact surfaces 7. One-piece stepped casting with heavily ribbed base 8. Maximum X/Y/Z travels: 640mm/610mm/680mm 9. Maximum work area: 785mm x 1000mm 10. Pressurized oil-air lubrication for spindle, ball screws, and linear guides 11. Thermal stability: spindle cooling 12. Spindle with BIG-PLUS® design 13. THK® (IKO®) roller guides 14. TSUBAKI® ball screws 15. Rapid traverse rate X/Y/Z: 60 m/min, acceleration 1G 16. APC unit with two 400mm x 400mm pallets 17. High-speed ATC: 1 sec tool-to-tool change 18. Hydraulic pallet clamping system with air seal detection 19. Through-spindle air blow 20. Air blow through spindle during ATC 21. High-quality telescopic covers for 3 axes 22. Automatic pallet wash system 23. Automatic machine on/off and warm-up timer (up to 7 days in advance) 24. Low lubrication alarm system 25. 3-color machine status indicator 26. Coolant tank level detection with float ball type 27. Oil skimmer 28. 50 kVA transformer 29. CE EN ISO 13849-1 certification Standard controller functions: 1. 15" color LCD with intelligent human-machine interface (iHMI) 2. Part program memory: 5,120 meters (2MB) 3. HRV-III+ servo drives 4. JERK control Bwjdpfoyz Du Ujx Abbjl 5. Nano AICC II control with 200-block lookahead 6. Ethernet 7. CF/USB device 8. Manual Guide i 9. Multilingual display 10. High-speed skip 11. Rigid tapping 12. Standard drilling cycles 13. Helical interpolation 14. Circular interpolation 15. Custom macros 16. Custom macros – common variables #600-#999 17. Tool life management 18. Storable programs: 1,000 19. Workpiece coordinate offsets: 48 pairs 20. Tool offsets G45 to G48 21. Tool offsets: 400 pairs 22. Tool offset memory C 23. Programmable data input G10 24. Coordinate system rotation 25. Polar coordinate command Additional functions: 1. Scaling 2. Program restart 3. Override interruption via MPG 4. Programmable mirror image 5. Programmable spindle/tool load monitoring 6. Programmable ATC speed 7. Programmable tool magazine speed 8. Large tool function Included accessories: 1. ATC60 60-tool magazine 2. Full 4th axis rotary table PARKSON WU® (substitution 33.3 rpm 0.001°) 3. Scraper-type chip conveyor (including 750L coolant tank) 4. MARPOSS® T-18 (retractable) tool measurement 5. 40 bar through-spindle coolant FIFTH-AXIS PREPARATION AND FIXTURING ON BOTH PALLETS WITH DRIVE – CABLES AND PIPES

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 80, number of axes: 4, This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details. • B-axis: 360° (indexing/rundtisch) • Tool magazine: 80 slots • Pallet quantity: 6 total (2 in use, 4 standby) Bedpfx Absyzzr Dobewl • Operating hours: approx. 2,700–3,000 hours per year (counter reported defective) • Total estimated hours: approx. 54,000–60,000 (based on 2-shift operation since 2006) • Coolant volume: 1,500 liters • Voltage: 400 V • Frequency: 50 Hz • Full load current: 100 A • Connection load: 65 kVA • Status: Fully functional, under power, currently in production Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. Bodpfjyzzbxjx Abbswl X-axis travel: 900 mm Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes CNC control: Fanuc FS31i Spindle speed: 20–20,000 rpm Table: - External length: 1,000 mm - External width: 500 mm - Table load capacity: 1,000 kg New electric spindle installed 4 years ago. Tool magazine for 30 tools, including tool holders. The machine operated on a single-shift basis. Inspection during operation is possible by prior arrangement.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 840 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of axes: 4, This 4-axis MORI SEIKI SH633 was manufactured in 2001. It features an X-axis travel of 840 mm, Y-axis travel of 760 mm, and Z-axis travel of 840 mm. The machine is equipped with 2 pallets, each measuring 630 x 630 mm, and can handle a maximum workpiece weight of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SH633 horizontal machining centre we have for sale. Contact us for further details. • Machine mass: 18,500 kg • Number of pallets: 2 Bsdpfx Aeyyzqkebbewl • Pallet size (L x W): 630 x 630 mm • Maximum workpiece weight: 1,200 kg • Number of tool pockets: 60 • Electrical specs: • Phase: 3 • Frequency: 50 Hz • Voltage: 200 V • Full load current: 252 A • Spindle motor current rating: 120 A • Interrupting capacity: 5 kA • Rated power: 87 kVA

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 Bwodpsyxpplofx Abbel • Z-axis ball screw replaced in 2020 Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min - CNC control Siemens 840 Dsl Bjdpfx Asyw R Ndobbjwl - Central coolant system

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- Bwsdpjyqu Nasfx Abbel binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Bwodpjyqu I Aofx Abbel Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, x-travel 900 mm y-travel 800 mm z-travel 970 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 12000 U/min rapid traverse 50 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 20 t Special features: Tool magazine for 90 HSK-A100 short-taper tools Bodpfx Ajyqu H Eebbewl 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), FANUC 16 MA-Pro 3 Control With B-axis Working travels 900 x 800 x 970 mm Tool changer with 244 Positions Spindle speeds 0-12'000 rpm Spindle taper HSK100 2 paletts 630 x 630 mm B-axis 0.001° Cooling through spindle 3D measuring taper Tool breakage control device Bwodpsylbc Nsfx Abbsl Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: Bwedsykpg Hepfx Abbel 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun Bjdpfx Aeyhwrcjbbewl - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: used, Year of construction: 2008, functionality: fully functional, Number of axes: 4 X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Bwjdpfoyd Rw Tjx Abbol Max. tool weight: 8 kg Spindle power: 22 kW Spindle speed: 12,000 RPM Further technical details upon request

Condition: used, Year of construction: 2005, functionality: fully functional, HSK63 X 630 Y 630 Z 630 Bsdpfxsyc Nc Ee Abbowl Traverse speed mm/min 1-40000 Number of tools 354 Tool diameter mm 70/150 (with adjacent stations free) Tool length mm 320 Number of pallets 2 Pallet dimensions 400x500 Max. pallet load KG 500 B axis NC Control Sinumerik 840D Tool breakage control Yes Measuring probe Heidenhain Yes Power kVA 69